94 lines
3.9 KiB
Markdown
94 lines
3.9 KiB
Markdown
# CanGrow
|
|
|
|
|
|
|
|
|
|
|
|
An easy to use DIY grow controller firmware (for cannabis).
|
|
|
|
|
|
|
|
|
|
# WORK IN PROGRESS
|
|
|
|
## Motivation
|
|
I havn't found an already existing grow controller project within the ESP / Arduino Core eco system which
|
|
met my personal requirements.
|
|
Those are an easy DIY, using low cost parts, Arduino Core sourcecode to hack own things together, having a WebUI, grab some Metrics for monitoring, standalone and my very special need that the Hardware should run completely with 12V.
|
|
|
|
### Update 14.09.2024 - Code Rewrite v0.2
|
|
|
|
I took some "summer break" from the project, and had the opportunity to talk to different people about it.
|
|
My conclusion at this point is, that the focus of this project is not the Hardware, it came out that it should be the software.
|
|
So I decided to completely rewrite the code from 0 - with recycling some parts of it.
|
|
Goal of the Rewrite is that the Firmware becomes more independent of the hardware used. It has to support both ESP8266 and ESP32
|
|
and let the user decide at which pin which output, sensor or whatever will be connected to. Like done in the [Tasmota](https://github.com/arendst/Tasmota) Firmware, I also want to support "Hardware Templates" which come with presets for PCBs like the one I created.
|
|
|
|
**Checklist for v0.2 Firmware**
|
|
- Support ESP8266 and ESP32
|
|
- AsyncWebserver instead ESP8266Webserver
|
|
- LittleFS instead of EEPROM()
|
|
- deliver static HTML, dynamic Stuff with Javascript
|
|
- (or is there a better way? please tell me!)
|
|
- Free configurable outputs
|
|
- Main outputs for Light, Air, Water
|
|
- Support for Tasmota Wifi Plugs (and others?)
|
|
- No Limitation for Amount of outputs
|
|
- Light
|
|
- support for I2C 0-10V Dimm control
|
|
- PWM dimm control
|
|
- Air
|
|
- support for I2C 0-10V Dimm control
|
|
- PWM dimm control
|
|
- Support for humidifier, heater (, CO2?)
|
|
- Read Fan RPM
|
|
- Water
|
|
- Usual watering
|
|
- Pump for fertilizer
|
|
- Free configurable Inputs
|
|
- Support for various I2C devices
|
|
- All kind of sensors for Temp, Humidity, Moisture, and so on
|
|
- Support for ADCs to connect multiple analoge sensors
|
|
- Support for Analog inputs
|
|
- onboard ones or I2C (ADC)
|
|
- Analog Multiplexer support (like CD4051)
|
|
- Calibrate sensors
|
|
- define 0% and 100% values
|
|
- Offsets
|
|
- MQTT support
|
|
- API
|
|
|
|
|
|
|
|
## Old v0.1 Features / ToDo List
|
|
|
|
- Measure values :white_check_mark:
|
|
- Humidity :white_check_mark:
|
|
- soil moisture :white_check_mark:
|
|
- temperature :white_check_mark:
|
|
- water level for water tank :white_check_mark:
|
|
- LED grow light control (on/off, dimming, max. 12V 50W load ) :white_check_mark:
|
|
- You can of course use a relais as well, if you want to drive 220V lights :white_check_mark:
|
|
- fan control (on/off, (PWM?) max 1A) :white_check_mark:
|
|
- pump control for automatic watering (max 1A) :large_blue_circle:
|
|
- Web UI and REST API for data and controlling :large_blue_circle:
|
|
- simple web ui :white_check_mark:
|
|
- REST API :large_blue_circle:
|
|
- Send notifications with web call (e.g. for mastodon) :red_circle:
|
|
- predefined grow profiles :large_blue_circle:
|
|
- persistent data :white_check_mark:
|
|
- Start of Grow :white_check_mark:
|
|
- day of grow :large_blue_circle:
|
|
- grow profile
|
|
- watering amount per week :large_blue_circle:
|
|
- light cycle :white_check_mark:
|
|
- wifi settings :white_check_mark:
|
|
- settings in general :white_check_mark:
|
|
- Easy to build and use for beginners (i hope so!) :white_check_mark:
|
|
- PCB layout to order from manufacture (jlcpcb or pcbway) :white_check_mark:
|
|
- easy to build up on a perfboard :white_check_mark:
|
|
- easy to etch pcb :white_check_mark:
|
|
- easy to access and modify :white_check_mark:
|
|
- low cost as possible! :white_check_mark:
|
|
|
|
:white_check_mark: Done - :large_blue_circle: In Progress - :red_circle: ToDo
|