Arduino Code, switched Pins for LED and Pump, added Serial output, heavily WIP.

Now the Hardware is finished so far, and the first perfboard prototype is working
https://social.la10cy.net/@DeltaLima/112226694609763485

Now I can focus on the software stuff.
This commit is contained in:
Marcus 2024-04-07 00:46:27 +02:00
parent f2753c3d1c
commit 903a1058e7

View file

@ -7,8 +7,8 @@
* D0 - MOSFET Fan * D0 - MOSFET Fan
* D1, D2 - I2C * D1, D2 - I2C
* D3 - DHT11 * D3 - DHT11
* D5 - MOSFET Grow LED, PWM * D5 - MOSFET Pump
* D6 - MOSFET Pump * D6 - MOSFET Grow LED, PWM
* D7 - waterlevel (set HIGH to read value) * D7 - waterlevel (set HIGH to read value)
* D8 - analog soil moisture (set HIGH to read value) * D8 - analog soil moisture (set HIGH to read value)
* A0 - analog input for soil moisture and waterlevel readings * A0 - analog input for soil moisture and waterlevel readings
@ -28,8 +28,8 @@ uint8_t PINfan = D0;
// If D3 is pulled to LOW, boot fails // If D3 is pulled to LOW, boot fails
uint8_t PINdht = D3; uint8_t PINdht = D3;
// D4 is HIGH at boot, boot fail if pulled to LOW // D4 is HIGH at boot, boot fail if pulled to LOW
uint8_t PINled = D5; // uint8_t PINpump = D5;
uint8_t PINpump = D6; uint8_t PINled = D6; //
uint8_t PINwaterlevel = D7; uint8_t PINwaterlevel = D7;
uint8_t PINsoilmoisture = D8; uint8_t PINsoilmoisture = D8;
uint8_t PINanalog = A0; uint8_t PINanalog = A0;
@ -197,8 +197,12 @@ void setup() {
Wire.begin(); Wire.begin();
// initialise Serial output // initialise Serial output
Serial.begin(115200); Serial.begin(115200);
//Serial.println("Test123");
// reset chirp // reset chirp
writeI2CRegister8bit(0x20, 6); //reset writeI2CRegister8bit(0x20, 6); //reset
// initialise I2C display // initialise I2C display
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x32 display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x32
@ -223,6 +227,7 @@ void setup() {
} }
void loop() { void loop() {
// set display cursor to top left // set display cursor to top left
display.setCursor(0,0); display.setCursor(0,0);
// display text // display text
@ -231,22 +236,38 @@ void loop() {
display.print(", "); display.print(", ");
display.println(getTemperature(1)); display.println(getTemperature(1));
Serial.print("I2C: ");
Serial.print(getSoilmoisture());
Serial.print(", ");
Serial.println(getTemperature(1));
display.print("DHT11: "); display.print("DHT11: ");
display.print(getTemperature(0)); display.print(getTemperature(0));
display.print(", "); display.print(", ");
display.println(getHumidity()); display.println(getHumidity());
display.display();
Serial.print("DHT11: ");
Serial.print(getTemperature(0));
Serial.print(", ");
Serial.println(getHumidity());
display.print("Water Status: "); display.print("Water Status: ");
display.println(getWaterlevel()); display.println(getWaterlevel());
Serial.print("Water Status: ");
Serial.println(getWaterlevel());
/*
display.print("light: "); display.print("light: ");
display.println(getLightchirp()); display.println(getLightchirp());
// print everything on the display // print everything on the display
*/
display.display(); display.display();
delay(800);
Serial.println("Test");
delay(1000);
} }