diff --git a/Arduino/CanGrow/CanGrow.ino b/Arduino/CanGrow/CanGrow.ino
index 75eb834..81a8969 100644
--- a/Arduino/CanGrow/CanGrow.ino
+++ b/Arduino/CanGrow/CanGrow.ino
@@ -7,8 +7,8 @@
  * D0      - MOSFET Fan
  * D1, D2  - I2C
  * D3      - DHT11
- * D5      - MOSFET Grow LED, PWM
- * D6      - MOSFET Pump
+ * D5      - MOSFET Pump
+ * D6      - MOSFET Grow LED, PWM
  * D7      - waterlevel (set HIGH to read value)
  * D8      - analog soil moisture (set HIGH to read value) 
  * A0      - analog input for soil moisture and waterlevel readings
@@ -28,8 +28,8 @@ uint8_t PINfan = D0;
 // If D3 is pulled to LOW, boot fails
 uint8_t PINdht = D3;
 // D4 is HIGH at boot, boot fail if pulled to LOW
-uint8_t PINled = D5; //
-uint8_t PINpump = D6;
+uint8_t PINpump = D5;
+uint8_t PINled = D6; //
 uint8_t PINwaterlevel = D7;
 uint8_t PINsoilmoisture = D8;
 uint8_t PINanalog = A0;
@@ -197,8 +197,12 @@ void setup() {
   Wire.begin();
   // initialise Serial output
   Serial.begin(115200);
+  //Serial.println("Test123");
+  
+  
   // reset chirp
   writeI2CRegister8bit(0x20, 6); //reset
+  
   // initialise I2C display
   display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x32
 
@@ -223,6 +227,7 @@ void setup() {
 }
 
 void loop() {
+  
   // set display cursor to top left
   display.setCursor(0,0);
   // display text
@@ -231,22 +236,38 @@ void loop() {
   display.print(", ");
   display.println(getTemperature(1));
 
+  Serial.print("I2C: ");
+  Serial.print(getSoilmoisture());
+  Serial.print(", ");
+  Serial.println(getTemperature(1));
+
   
   display.print("DHT11: ");
   display.print(getTemperature(0));
   display.print(", ");
   display.println(getHumidity());
-  display.display();
+
+  Serial.print("DHT11: ");
+  Serial.print(getTemperature(0));
+  Serial.print(", ");
+  Serial.println(getHumidity());
 
 
   display.print("Water Status: ");
   display.println(getWaterlevel());
 
+  Serial.print("Water Status: ");
+  Serial.println(getWaterlevel());
+/*
   display.print("light: ");
   display.println(getLightchirp());
 
   // print everything on the display
+  */
   display.display();
-  delay(800);
   
+  Serial.println("Test");
+  delay(1000);
+  
+ 
 }