fix welcome.md

nanodesk-files/usr/bin/nanodesk-installer-gxm

@@ -0,0 +1,328 @@
+#!/bin/bash
+
+TITLE="nanodesk-installer-gxm"
+VERSION=$(cat /usr/share/nanodesk/version)
+HEADER="                   ----==== nanodesk-installer-gxm ====----
+nanodesk ${VERSION}
+"
+
+GXMCMD="gxmessage -name $TITLE -center -geometry 669x420 -wrap -font mono,10 -file -"
+
+GXMINFO="gxmessage -name $TITLE -center -buttons Close -default Close -font mono,13 -file -"
+
+DOCROOT="/usr/share/doc/nanodesk-installer"
+DILLOCMD="dillo -f -g 640x480 $DOCROOT"
+
+TARGET=""
+
+ERRORFILE="/tmp/nanodesk-installer.error"
+SUCCESSFILE="/tmp/nanodesk-installer.success"
+
+# initialize RETURN with a high value
+RETURN=255
+
+
+#####
+#
+# DIALOGES
+#
+#####
+
+gxm-abort() {
+
+  if gxm-confirm
+  then
+    echo "Installation aborted!"| $GXMINFO
+    exit 1
+  fi
+}
+
+gxm-confirm() {
+  echo "Are you sure you want abort?" | $GXMINFO -buttons "Yes:0,No:1" 
+  return $?
+}
+
+gxm-cleanup() {
+  echo "!! An old Errorfile
+!! $ERRORFILE
+!! was found 
+
+Last message: $(cat $ERRORFILE)
+
+It is necessary to delete it if you want to continue.
+When deleting it, you will be asked for your password.
+
+Delete $ERRORFILE ?" | $GXMINFO -buttons "Yes:0,No:1" -default Yes -geometry 640x320
+  return $?
+}
+
+gxm-welcome() {
+	echo "$HEADER
+This is a gxmessage based Installation assistant for nanodesk.
+
+To install nanodesk you need a partitioned and formated drive.
+You can do the partioning and formating with 'GParted'. (Close 'GParted'
+when you are done)
+
+If you need help how to do so, click on 'Help'.
+
+When you are done partitioning and your installation target is formated,
+go ahead with 'Install'.
+
+When asked for a password, type in 'debian', which is the nanodesk live
+default." |
+	$GXMCMD -buttons "Abort:1,Help:2,GParted:10,Install:0"
+	return $?
+}
+
+gxm-select-target() {
+	echo "$HEADER
+Please enter the target and press 'Install'.
+For example: /dev/sda1" |
+	$GXMCMD -entry -buttons "Abort:1,Help:2,Install:0" 
+	return $?
+}
+
+gmx-start-cli-installer() {
+  echo "$HEADER
+The commandline nanodesk-installer will now open in a new xterm
+window.
+
+Target device: $1
+
+Please follow the instructions there and see you later again..." |
+  $GXMCMD -buttons "Abort:1,open nanodesk-installer CLI:0" -default "open nanodesk-installer CLI"
+  return $?
+}
+
+gxm-success() {
+  echo "$HEADER
+Installation complete! :)
+
+You can now reboot or continue using nanodesk live." | $GXMCMD -buttons Continue:0,Reboot:2 -default Continue
+  return $?
+}
+
+gxm-error() {
+  echo "$HEADER
+Installation FAILED!! :(
+
+Last message was: $(cat $ERRORFILE)" | $GXMCMD -buttons Close -default Close
+  return $?
+}
+
+
+#####
+#
+# HELP
+#
+#####
+
+help-gparted() {
+	
+	cat <<EOF | $GXMCMD 
+$HEADER
+# Partitioning Help
+
+## You have an empty drive
+
+Cool, easiest way! When you have an empty drive, just start GParted
+and select in the right up corner your correct drive you want to install
+nanodesk on.
+
+After that click in the upper Menu the entry 'Drive' and select
+'create partitiontable'.
+
+In the upcoming dialoge select 'ms-dos' abd 'Apply'.
+
+Now right click in the empty bar representing your drive and select 
+'New'. 
+
+First we create your root filesystem. It gets most of the space, just
+let around 4-8GB space left after free for a swap partition we create
+afterwards.
+
+Create as 'Primary' and select 'ext4' as filesystem. Confirm that with
+'OK' and repeat the steps with the leftover diskspace and create a 
+partition with the 'linux-swap' filesystem.
+
+When you done all this we need to activate our changes. Select 'Edit'
+from the upper Menu and choose 'Apply All Operations' and confirm.
+
+When all operations are done successfully, close GParted and click on
+'Install' in the nanodesk-installer.
+EOF
+ }
+
+help-select-target() {
+	
+	cat <<EOF | $GXMCMD 
+$HEADER
+
+# target device 
+
+Here you have to enter the path to your drive with the 
+'ext4' filesystem on it. This could be in most cases for example
+
+    /dev/sda1
+    
+Which says it's the first drive in the system (sdA) and the first 
+partition on it (sda1).
+
+If you are not sure, you can abort here and open nanodesk-installer 
+again. Open again GParted to verify that you choose the correct drive.
+
+# commandline nanodesk-installer
+
+In the next step the core of the installer, the commandline tool
+`/usr/sbin/nanodesk-installer` opens up in a new xterm window.
+
+Confirm the start of the installation by typing 'YES' all upper case 
+and confirm it by pressing [ENTER].
+
+When the base system is installed, you can choose if you want to keep 
+the default user 'debian' with its password 'debian' (press [K])
+or you also can remove this default user and create your own new one
+(press [U]).
+
+# when something goes wrong
+
+If the installation proccess exits with an error, you can clean up
+everything by hand:
+
+    sudo su -
+    umount /mnt/
+    rm -Rf /tmp/nanodesk-installer.*
+    mkfs.ext4 [TARGET]
+    
+    # you can re-run the GUI again
+    nanodesk-installer-gxm
+    
+    # or the cli nanodesk-installer directly
+    nanodesk-installer [TARGET]
+    
+EOF
+ }
+
+
+#####
+#
+# EXEC
+#
+#####
+
+exec-gparted() {
+	pkexec /usr/sbin/gparted
+}
+
+exec-nanodesk-installer() {
+	# run the installer within xterm
+  xterm -e /bin/bash -c "pkexec /usr/sbin/nanodesk-installer $1 true || echo 'pkexec auth failed' >> $ERRORFILE" 
+}
+
+
+#####
+#
+# MAIN
+#
+#####
+
+# cleanup old errorfile
+if [ -f "$ERRORFILE" ]
+then
+  RETURN=255
+  while [ $RETURN -gt 0 ]
+  do  
+    gxm-cleanup
+    RETURN=$?
+    
+    if [ $RETURN -gt 0 ]
+    then
+      gxm-abort
+    else
+      pkexec rm -f $ERRORFILE || RETURN=255
+    fi
+  done
+fi
+
+RETURN=255
+# welcome screen
+while [ $RETURN -gt 0 ]
+do
+	gxm-welcome
+	RETURN=$?
+	echo CODE $RETURN
+	case $RETURN in
+		1) gxm-abort ;;
+		2) help-gparted ;;
+		10) exec-gparted ;;
+	esac
+done
+
+# target select
+RETURN=255
+while [ $RETURN -gt 0 ]
+do
+	TARGET=$(gxm-select-target)
+	RETURN=$?
+	echo CODE $RETURN
+	echo TARGET $TARGET
+
+
+	# if RC = 1, then user clicked "abort"
+	case $RETURN in
+		1) gxm-abort ;;
+		2) help-select-target ;;
+		0) echo test if blockdevice
+	   	   if [ ! -b "$TARGET" ]
+	   	   then
+	   	   	RETURN=255
+	   	   	echo no
+			echo -e "Error!\n'${TARGET}' does not exist or is not a blockdevice!" | $GXMINFO
+	   	   fi
+		   ;;
+	esac
+done
+
+# start cli nanodesk-installer
+RETURN=255
+while [ $RETURN -gt 0 ]
+do
+	gmx-start-cli-installer $TARGET
+	RETURN=$?
+  test $RETURN -eq 1 && gxm-abort
+	echo CODE $RETURN
+done
+
+exec-nanodesk-installer $TARGET
+
+
+if [ -f "$ERRORFILE" ]
+then
+  gxm-error
+  exit 1  
+
+elif [ -f "$SUCCESSFILE" ]
+then
+  gxm-success
+  RETURN=$?
+  
+  case $RETURN in
+    2) systemctl reboot ;;
+    *) exit 0 ;;
+  esac
+else
+  echo "Unexpected Error! Exit here." | $GXMINFO -buttons Close -default Close
+  exit 1
+fi
+
+
+#if [ $RETURN != 0 ]
+#then
+#	echo "ERROR!" | $GXMINFO
+#	exit 1
+#else
+#	echo "SUCCESS!" | $GXMINFO
+#	exit 0
+#fi
+

nanodesk-files/usr/sbin/nanodesk-installer

@@ -7,8 +7,16 @@
 ### this is just a hobby, nothing serious. i know the debian installer and other
 ### exist, but i wanted to try some handcrafted installation.
 
+if [ -n "$2" ] && [ "$2" == true ]
+then
+  GXMINSTALLER=true
+else
+  GXMINSTALLER=false
+fi
 
 CHROOTCMD="chroot /mnt/"
+ERRORFILE="/tmp/nanodesk-installer.error"
+SUCCESSFILE="/tmp/nanodesk-installer.success"
 
 ##message () {
 ##  echo "== " $1
@@ -44,14 +52,18 @@ function message() {
 }
 
 error () {
+  echo "Error at: $MESSAGE" >> $ERRORFILE
   message error "ERROR!"
+  test "$GXMINSTALLER" == true && read -p "Press [ENTER] to continue..."
   exit 1
 }
 
 finish () {
 
   message "removing installer files from target"
-  $CHROOTCMD /usr/bin/rm -Rf /usr/sbin/nanodesk-installer || error
+  $CHROOTCMD /usr/bin/rm -Rf /usr/sbin/nanodesk-installer || error 
+  $CHROOTCMD /usr/bin/rm -Rf /usr/bin/nanodesk-installer-gxm || error 
+  $CHROOTCMD /usr/bin/rm -Rf /usr/share/applications/nanodesk-installer-gxm.desktop || error 
 
   message "removing live-packages from target"
   $CHROOTCMD /usr/bin/apt -y purge 'live-boot*' 'live-tools*'
@@ -61,6 +73,7 @@ finish () {
 
 
   message "we are now ready to boot from $target"
+  touch $SUCCESSFILE
   exit 0
 }
 
@@ -98,7 +111,7 @@ message "Are you sure to install nanodesk to $target?"
 message "To continue type 'YES' and enter, to cancel type anything else or CTRL+C"
 
 read -p "> " DOINSTALL
-test "$DOINSTALL" == "YES" || error
+test "$DOINSTALL" == "YES" || error 
 
 message "... GOOD LUCK!"
 message "mounting $target to /mnt/"
@@ -108,7 +121,7 @@ message "copy systemfiles"
 # rsync is dumb
 #rsync -aHx / /mnt/ || error
 
-unsquashfs -d /mnt/ /run/live/medium/live/filesystem.squashfs || error
+unsquashfs -d /mnt/ /run/live/medium/live/filesystem.squashfs || error 
 
 message "bind mount dev proc sys"
 for m in dev proc sys

nanodesk-files/usr/share/applications/nanodesk-installer-gxm.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=nanodesk-installer
+Comment=installer gxmessage script for nanodesk live
+Exec=/usr/bin/nanodesk-installer-gxm
+Icon=/usr/share/icons/Tango/scalable/apps/system-installer.svg
+Terminal=true
+Type=Application
+Categories=System;

nanodesk-files/usr/share/doc/nanodesk/welcome/welcome.md

@@ -5,21 +5,24 @@ that comes with the `jwm` window manager.
 
 This is just a fun project for learning purposes. 
 
-## install to disk
+Visit the git repository at 
+[git.la10cy.net/DeltaLima/nanodesk](https://git.la10cy.net/DeltaLima/nanodesk)
+
+## install to disk: nanodesk-installer
 
 You can install nanodesk to your harddrive. Before doing so,
 you have to get your drive partitioned and formated. 
 
-Partitioning on an empty drive is simple, you need two partitions
+Under `Menu -> System -> nanodesk-installer` you find the GUI 
+of the nanodesk-installer. It will guide you through the first basic
+partitioning steps and formating your drive with `GParted`.
+The installation process itself is done by the `nanodesk-installer` cli.
 
-- partition1: ext4, main filesystem. 
-- partition2: swap, optional but recommended. About 20%-50% the size of your RAM.
+You can also just run the cli directly running
+`sudo nanodesk-installer [TARGET]`
 
-You can use `Menu -> System -> GParted` or `fdisk` on the shell for this.
-Please read their manuals.
-
-This done, just run `sudo nanodesk-installer /dev/sdXY` from the terminal
-and the installation will start. (change /dev/sdXY to your drive)
+Keep in Mind, that `[TARGET]` needs to be a (ext4) preformated 
+blockdevice and should be a partition.
 
 ## installing software