pcb wip v0.6.1 - minor silkscreen tweak.

Arduino/CanGrow/CanGrow.ino

@@ -71,16 +71,16 @@ void setup() {
   
   
   // set all OUTPUT to low
-  digitalWrite(PinFAN, LOW);
+  digitalWrite(PinFAN, HIGH);
   digitalWrite(PINwaterlevel, LOW);
-  digitalWrite(PinLED, LOW);
-  digitalWrite(PinPUMP, LOW);
+  digitalWrite(PinLED, HIGH);
+  digitalWrite(PinPUMP, HIGH);
   // except PINsoilmoisture
   // PINsoilmoisture is always HIGH and gets LOW in moment of waterlevel measurement
   digitalWrite(PINsoilmoisture, LOW);
   
-  // set PWM frequency to 2.2KHz
-  analogWriteFreq(2200);
+  // set PWM frequency to 13.37KHz
+  analogWriteFreq(13370);
 
   // Start EEPROM
   EEPROM.begin(512);

Arduino/CanGrow/CanGrow_SysFunctions.h

@@ -439,9 +439,9 @@ void setOutput(byte Output, byte OutputState) {
   //~ Serial.println(UseRelais);
   
   if( (UseRelais == true) || (OutputPin == PinPUMP) ) {
-    digitalWrite(OutputPin, OutputState);
+    digitalWrite(OutputPin, 1 - OutputState);
   } else {
-    analogWrite(OutputPin, OutputState);
+    analogWrite(OutputPin, 255 - OutputState);
   }
 }
 
@@ -661,11 +661,13 @@ void controlPUMP() {
     // when PumpOnManuel is true, turn pump on for PumpOnTime seconds
     if(PumpOnManual == true) {
       if(PumpOnTimePassed < PumpOnTime) {
-        digitalWrite(PinPUMP, HIGH);
+        setOutput(3, 1);
+        //digitalWrite(PinPUMP, HIGH);
         PumpOnTimePassed++;
       } else {
         PumpOnManual = false;
-        digitalWrite(PinPUMP, LOW);
+        setOutput(3, 0);
+        //digitalWrite(PinPUMP, LOW);
         EEPROM.put(237, PumpLastOn);
         PumpOnTimePassed = 0;
       }
@@ -677,17 +679,20 @@ void controlPUMP() {
           if( (timeClient.getEpochTime() - PumpLastOn) >= (PumpInterval) ) { // TODO:  * 24 * 60 * 60 PumpInterval
             // only water as long PumpOnTime
             if(PumpOnTimePassed < PumpOnTime) {
-              digitalWrite(PinPUMP, HIGH);
+              setOutput(3, 1);
+              //digitalWrite(PinPUMP, HIGH);
               PumpOnTimePassed++;
             } else {
-              digitalWrite(PinPUMP, LOW);
+              setOutput(3, 0);
+              //digitalWrite(PinPUMP, LOW);
               PumpLastOn = timeClient.getEpochTime();
               // write the value to EEPROM for the case ESP gets restarted
               EEPROM.put(237, PumpLastOn);
               PumpOnTimePassed = 0;
             }
           } else {
-            digitalWrite(PinPUMP, LOW);
+            setOutput(3, 0);
+            //digitalWrite(PinPUMP, LOW);
           }
         break;
         
@@ -696,16 +701,19 @@ void controlPUMP() {
           if( (valSoilmoistureAvg < SoilmoistureLow) || ( (valSoilmoistureAvg >= SoilmoistureLow) &&   ( (PumpOnTimePassed > 0) && (PumpOnTimePassed <= PumpOnTime) )  ) ) {
             // check if we alerady exceeded max PumpOnTime
             if(PumpOnTimePassed < PumpOnTime) {
-              digitalWrite(PinPUMP, HIGH);
+              setOutput(3, 1);
+              //digitalWrite(PinPUMP, HIGH);
               PumpOnTimePassed++;
             } else {
-              digitalWrite(PinPUMP, LOW);
+              setOutput(3, 0);
+              //digitalWrite(PinPUMP, LOW);
               PumpLastOn = timeClient.getEpochTime();
               PumpOnTimePassed = 0;
             }
           // when valSoilmoistureAvg is greater then the Low value,   
           } else {
-           digitalWrite(PinPUMP, LOW);
+           setOutput(3, 0);
+           //digitalWrite(PinPUMP, LOW);
           }
         break;
         
@@ -717,17 +725,20 @@ void controlPUMP() {
             ) ) {
             // check if we alerady exceeded max PumpOnTime
             if(PumpOnTimePassed < PumpOnTime) {
-              digitalWrite(PinPUMP, HIGH);
+              setOutput(3, 1);
+              //digitalWrite(PinPUMP, HIGH);
               PumpOnTimePassed++;
             } else {
-              digitalWrite(PinPUMP, LOW);
+              setOutput(3, 0);
+              //digitalWrite(PinPUMP, LOW);
               PumpLastOn = timeClient.getEpochTime();
               EEPROM.put(237, PumpLastOn);
               PumpOnTimePassed = 0;
             }
           // when valSoilmoistureAvg is greater then the Low value,   
           } else {
-           digitalWrite(PinPUMP, LOW);
+           setOutput(3, 0);
+           //digitalWrite(PinPUMP, LOW);
           }
         break;
         
@@ -735,6 +746,7 @@ void controlPUMP() {
     }
   } else {
     // ensure pump is off when it should be off
-    digitalWrite(PinPUMP, LOW);
+    setOutput(3, 0);
+    //digitalWrite(PinPUMP, LOW);
   }
 }

Arduino/CanGrow/CanGrow_Version.h

@@ -1,5 +1,5 @@
 /* CanGrow_Version.h gets generated from cangrow.sh */
 
 const char* CanGrowVer = "0.1-dev";
-const char* CanGrowBuild = "806aa2d-20240617022728";
+const char* CanGrowBuild = "d2e264d-20240919022041";
 

KiCad/CanGrow/CanGrow.kicad_pro

@@ -492,6 +492,7 @@
   },
   "schematic": {
     "annotate_start_num": 0,
+    "bom_export_filename": "",
     "bom_fmt_presets": [],
     "bom_fmt_settings": {
       "field_delimiter": ",",
@@ -591,7 +592,7 @@
   "sheets": [
     [
       "42428fce-ab8c-4a80-af19-dee4f0070d36",
-      "Stammblatt"
+      "Root"
     ]
   ],
   "text_variables": {}

KiCad/CanGrow/CanGrow.kicad_sch

@@ -7,7 +7,7 @@
 	(title_block
 		(title "CanGrow")
 		(date "2024-04-12")
-		(rev "0.6")
+		(rev "0.6.1")
 		(company "DeltaLima")
 	)
 	(lib_symbols
@@ -6497,7 +6497,7 @@
 				(justify left)
 			)
 		)
-		(property "Value" "100µF"
+		(property "Value" "47µF"
 			(at 251.206 141.986 0)
 			(effects
 				(font
@@ -7103,7 +7103,7 @@
 				)
 			)
 		)
-		(property "Value" "10k"
+		(property "Value" "100k"
 			(at 162.56 145.034 90)
 			(effects
 				(font
@@ -8857,7 +8857,7 @@
 				)
 			)
 		)
-		(property "Footprint" "MP1584EN:MP1584EN_Module"
+		(property "Footprint" "MP1584EN_CanGrow:MP1584EN_Module"
 			(at 54.864 43.688 0)
 			(effects
 				(font
@@ -9734,7 +9734,7 @@
 				(justify left)
 			)
 		)
-		(property "Value" "10µF"
+		(property "Value" "100µF"
 			(at 20.32 30.48 0)
 			(effects
 				(font
@@ -9743,7 +9743,7 @@
 				(justify left)
 			)
 		)
-		(property "Footprint" "Capacitor_THT:CP_Radial_D5.0mm_P2.50mm"
+		(property "Footprint" "Capacitor_THT:CP_Radial_D6.3mm_P2.50mm"
 			(at 28.9052 34.29 0)
 			(effects
 				(font
@@ -10518,7 +10518,7 @@
 				)
 			)
 		)
-		(property "Value" "10k"
+		(property "Value" "100k"
 			(at 165.1 112.014 90)
 			(effects
 				(font
@@ -11148,7 +11148,7 @@
 				)
 			)
 		)
-		(property "Value" "10k"
+		(property "Value" "100k"
 			(at 167.64 78.994 90)
 			(effects
 				(font

KiCad/CanGrow/custom/MP1584EN/MP1584EN_Module.kicad_mod

@@ -7,6 +7,7 @@
 	(property "Reference" "U3"
 		(at 0 7.3152 180)
 		(layer "F.SilkS")
+		(hide yes)
 		(uuid "5401f2b9-08c4-433b-a536-95365a9d5b27")
 		(effects
 			(font
@@ -18,6 +19,7 @@
 	(property "Value" "SRT_Power_3A"
 		(at -0.3556 5.1816 0)
 		(layer "F.Fab")
+		(hide yes)
 		(uuid "3aca6114-af0d-478b-80ab-52d5719c58c0")
 		(effects
 			(font
@@ -35,6 +37,7 @@
 		(effects
 			(font
 				(size 1.27 1.27)
+				(thickness 0.15)
 			)
 		)
 	)
@@ -47,6 +50,7 @@
 		(effects
 			(font
 				(size 1.27 1.27)
+				(thickness 0.15)
 			)
 		)
 	)
@@ -59,287 +63,288 @@
 		(effects
 			(font
 				(size 1.27 1.27)
+				(thickness 0.15)
 			)
 		)
 	)
 	(attr through_hole)
 	(fp_line
-		(start -11.176 -7.493)
-		(end -11.176 8.636)
+		(start -10.2122 -6.0076)
+		(end -10.2122 10.1214)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "c04c845e-4b76-4dc5-b3a1-2129724a526d")
+		(uuid "6292f9f0-b20e-4f1e-990a-0b11f0bae5e2")
 	)
 	(fp_line
-		(start -11.176 8.636)
-		(end 10.16 8.636)
+		(start -10.2122 10.1214)
+		(end 11.1238 10.1214)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "b279bc16-0fa3-40ad-9a71-246db78cd5db")
+		(uuid "7b8db049-a75b-4c09-b1c9-de8a147005c4")
 	)
 	(fp_line
-		(start -7.4168 -1.8796)
-		(end -1.3208 -1.8796)
+		(start -6.453 -0.3942)
+		(end -0.357 -0.3942)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "1cc5b0bc-c494-4f7d-bca7-4c61a9317e88")
+		(uuid "c4ed20b9-5f3d-4741-9180-be3de36b2638")
 	)
 	(fp_line
-		(start -7.4168 2.5908)
-		(end -7.4168 -1.8796)
+		(start -6.453 4.0762)
+		(end -6.453 -0.3942)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "cb93a75e-f00e-4ada-977c-4ebffb53a1ef")
+		(uuid "d7e1ea82-a28a-4e4c-8051-86a68fea340c")
 	)
 	(fp_line
-		(start -6.2992 -5.7658)
-		(end -2.8702 -5.7658)
+		(start -5.3354 -4.2804)
+		(end -1.9064 -4.2804)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "58d4cb4b-5a3f-4493-aa99-0deaf5683749")
+		(uuid "06328989-1b0f-46d7-883b-033109387c94")
 	)
 	(fp_line
-		(start -6.2992 -4.4958)
-		(end -6.2992 -5.7658)
+		(start -5.3354 -3.0104)
+		(end -5.3354 -4.2804)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "23c244a5-fbbf-43b9-8e18-3f2c2f80daac")
+		(uuid "8d77e0eb-1044-47c3-83fb-eeb0a96fae5d")
 	)
 	(fp_line
-		(start -2.8702 -5.7658)
-		(end -2.8702 -4.4958)
+		(start -1.9064 -4.2804)
+		(end -1.9064 -3.0104)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "dc18e288-f18f-43b9-8bf9-a20134e8fe6b")
+		(uuid "aacf448e-591d-467e-9b05-308beed279bf")
 	)
 	(fp_line
-		(start -2.8702 -4.4958)
-		(end -6.2992 -4.4958)
+		(start -1.9064 -3.0104)
+		(end -5.3354 -3.0104)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "0db4cf0f-ac7a-4c9b-ae10-55a36ddbd4e4")
+		(uuid "1a4d146d-43a7-4082-9120-8896a6302895")
 	)
 	(fp_line
-		(start -1.3208 2.5908)
-		(end -7.4168 2.5908)
+		(start -0.357 4.0762)
+		(end -6.453 4.0762)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "bb094c9b-9d8c-4f38-83ed-01fc7944b9a1")
+		(uuid "28f1cc66-eb55-47b0-8a8f-d7e1518711f4")
 	)
 	(fp_line
-		(start -1.3208 2.5908)
-		(end -1.3208 -1.8796)
+		(start -0.357 4.0762)
+		(end -0.357 -0.3942)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "15406a1c-aa60-4574-94bc-bc7b1c93f995")
+		(uuid "6820cfba-dad3-4b8f-888f-85dbe2540377")
 	)
 	(fp_line
-		(start 0.3556 -3.4544)
-		(end 0.3556 3.2004)
+		(start 1.3194 -1.969)
+		(end 1.3194 4.6858)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "7f056460-3325-494e-89b7-e00faf35b853")
+		(uuid "6a862895-3bf4-4887-9dab-db5334a221bc")
 	)
 	(fp_line
-		(start 0.3556 -3.4544)
-		(end 7.0104 -3.4544)
+		(start 1.3194 -1.969)
+		(end 7.9742 -1.969)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "fb81112c-7565-47b2-8682-db2abbd3ddf0")
+		(uuid "79debc5c-9a35-496c-8f29-014030f144a4")
 	)
 	(fp_line
-		(start 1.9304 -0.5969)
-		(end 4.5593 -0.5969)
+		(start 2.8942 0.8885)
+		(end 5.5231 0.8885)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "48533810-e56f-47c8-8bce-ce1c68dc9c75")
+		(uuid "84cd7a4d-d683-4fbc-825f-665c5b0f0758")
 	)
 	(fp_line
-		(start 1.9304 0.0381)
-		(end 1.9304 -0.5969)
+		(start 2.8942 1.5235)
+		(end 2.8942 0.8885)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "03a589e3-a74e-4336-8cad-43118c287e8a")
+		(uuid "4e52b40e-83c8-4d07-95ff-b90fa1783618")
 	)
 	(fp_line
-		(start 1.9304 0.0381)
-		(end 4.5593 0.0381)
+		(start 2.8942 1.5235)
+		(end 5.5231 1.5235)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "ce0e1e31-1518-4423-8678-79c96482e137")
+		(uuid "a399ee1e-f3f5-4636-9f46-aa9b47e0db94")
 	)
 	(fp_line
-		(start 4.5593 -1.2954)
-		(end 5.8293 -0.2794)
+		(start 5.5231 0.19)
+		(end 6.7931 1.206)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "60031373-aa96-4773-880b-c8200b9c8446")
+		(uuid "974ab6af-0377-40af-977c-a13764cf3b42")
 	)
 	(fp_line
-		(start 4.5593 -0.5969)
-		(end 4.5593 -1.2954)
+		(start 5.5231 0.8885)
+		(end 5.5231 0.19)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "e8ee4f92-28ab-4a33-a9f9-a6abaf63c07f")
+		(uuid "a43ae26f-5b7d-4a6a-a076-714c678ef718")
 	)
 	(fp_line
-		(start 4.5593 0.8001)
-		(end 4.5593 0.0381)
+		(start 5.5231 2.2855)
+		(end 5.5231 1.5235)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "08acbb33-d7a2-40ec-b9c7-e1637e3c6b50")
+		(uuid "cc8ed141-1479-47bc-b57c-ac3d7de64f29")
 	)
 	(fp_line
-		(start 5.8293 -0.2794)
-		(end 4.5593 0.8001)
+		(start 6.7931 1.206)
+		(end 5.5231 2.2855)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "93934ce2-e724-43a7-936d-d5b13ecab734")
+		(uuid "59d9abe5-a32f-469b-9fd6-08593b95afde")
 	)
 	(fp_line
-		(start 7.0104 -3.4544)
-		(end 7.0104 3.2004)
+		(start 7.9742 -1.969)
+		(end 7.9742 4.6858)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "67302b70-b929-4d08-9b20-00ad993d7c48")
+		(uuid "73f5a41f-61af-42a7-bacf-c58d7968f53a")
 	)
 	(fp_line
-		(start 7.0104 3.2004)
-		(end 0.3556 3.2004)
+		(start 7.9742 4.6858)
+		(end 1.3194 4.6858)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "0718d059-35cf-4406-ab64-7d7e6d83cf21")
+		(uuid "9ec91a9f-ceda-4f7c-b422-f6a162037a63")
 	)
 	(fp_line
-		(start 10.16 -7.493)
-		(end -11.176 -7.493)
+		(start 11.1238 -6.0076)
+		(end -10.2122 -6.0076)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "3f15543c-c79e-44be-a583-62309e7f62ac")
+		(uuid "ed6fa262-c61a-4bb7-90b5-f3b3ee971658")
 	)
 	(fp_line
-		(start 10.16 8.636)
-		(end 10.16 -7.493)
+		(start 11.1238 10.1214)
+		(end 11.1238 -6.0076)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "53974b4e-f4fd-4a51-b72c-09e66d707da7")
+		(uuid "0251e69d-8ab4-482d-b741-3238b0fef811")
 	)
 	(fp_circle
-		(center -8.1534 -4.8641)
-		(end -7.5819 -4.3561)
+		(center -7.1896 -3.3787)
+		(end -6.6181 -2.8707)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "c9f36fdc-7af5-40c1-b400-6db31e87c78d")
+		(uuid "55702fe3-b28e-4e80-86d3-f64c403681d1")
 	)
 	(fp_circle
-		(center -8.1026 5.8166)
-		(end -7.5311 6.3246)
+		(center -7.1388 7.302)
+		(end -6.5673 7.81)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "4e0da6f8-ad5e-4cc1-95ba-014ff87aee07")
+		(uuid "0ffe4b1a-c314-4a3c-8456-b73925f03b28")
 	)
 	(fp_circle
-		(center 6.4262 -4.8641)
-		(end 6.9977 -4.3561)
+		(center 7.39 -3.3787)
+		(end 7.9615 -2.8707)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "1cb73701-38be-459b-a7c5-86d645c4cc0e")
+		(uuid "82347fd5-ab01-478d-bf06-2837edd3b9c5")
 	)
 	(fp_circle
-		(center 6.5278 5.7912)
-		(end 7.0993 6.2992)
+		(center 7.4916 7.2766)
+		(end 8.0631 7.7846)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "079e6cb8-ca9e-47a7-9f22-9f08bcf4c5ee")
+		(uuid "f74d6220-edbd-4a39-a810-7cf19016933f")
 	)
 	(fp_poly
 		(pts
-			(xy -6.7056 -2.54) (xy -6.2992 -2.54) (xy -6.2992 -1.9304) (xy -6.7056 -1.9304)
+			(xy -5.7418 -1.0546) (xy -5.3354 -1.0546) (xy -5.3354 -0.445) (xy -5.7418 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -347,11 +352,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "9f932498-4dae-4e35-9fff-b4bb98c73816")
+		(uuid "80ff133a-8874-4f0a-8c9e-250633a8855a")
 	)
 	(fp_poly
 		(pts
-			(xy -6.7056 2.6416) (xy -6.2992 2.6416) (xy -6.2992 3.2512) (xy -6.7056 3.2512)
+			(xy -5.7418 4.127) (xy -5.3354 4.127) (xy -5.3354 4.7366) (xy -5.7418 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -359,11 +364,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "372c02f5-61f4-4301-aca3-d818a674272e")
+		(uuid "6e08c3a4-3092-400f-9a55-4e8081226741")
 	)
 	(fp_poly
 		(pts
-			(xy -5.2324 -2.54) (xy -4.826 -2.54) (xy -4.826 -1.9304) (xy -5.2324 -1.9304)
+			(xy -4.2686 -1.0546) (xy -3.8622 -1.0546) (xy -3.8622 -0.445) (xy -4.2686 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -371,11 +376,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "8b8d18d4-2701-4c72-966d-f580819a5bea")
+		(uuid "6a96c3fa-8827-498f-9c6c-ffb212b62a93")
 	)
 	(fp_poly
 		(pts
-			(xy -5.2324 2.6416) (xy -4.826 2.6416) (xy -4.826 3.2512) (xy -5.2324 3.2512)
+			(xy -4.2686 4.127) (xy -3.8622 4.127) (xy -3.8622 4.7366) (xy -4.2686 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -383,11 +388,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "d6255dee-580f-4b85-9e3c-df858fc7bc8d")
+		(uuid "0886a33b-f340-44bf-9de5-f44938efcb54")
 	)
 	(fp_poly
 		(pts
-			(xy -3.7592 -2.54) (xy -3.3528 -2.54) (xy -3.3528 -1.9304) (xy -3.7592 -1.9304)
+			(xy -2.7954 -1.0546) (xy -2.389 -1.0546) (xy -2.389 -0.445) (xy -2.7954 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -395,11 +400,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "ebef6c64-7266-47b4-9a64-d9d611adc26d")
+		(uuid "51e3d89a-8455-4f58-ad05-c15d024e9c54")
 	)
 	(fp_poly
 		(pts
-			(xy -3.7592 2.6416) (xy -3.3528 2.6416) (xy -3.3528 3.2512) (xy -3.7592 3.2512)
+			(xy -2.7954 4.127) (xy -2.389 4.127) (xy -2.389 4.7366) (xy -2.7954 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -407,11 +412,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "59be5a8f-ac87-4541-97df-321cb1234c4f")
+		(uuid "5514ba93-c636-4e40-855a-d8123eaad1aa")
 	)
 	(fp_poly
 		(pts
-			(xy -2.2352 -2.54) (xy -1.8288 -2.54) (xy -1.8288 -1.9304) (xy -2.2352 -1.9304)
+			(xy -1.2714 -1.0546) (xy -0.865 -1.0546) (xy -0.865 -0.445) (xy -1.2714 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -419,11 +424,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "b1663dd5-c63f-4034-b29b-537f9a6abd47")
+		(uuid "d6b9bc27-cda7-4d8b-ad26-7b36a48ecfbd")
 	)
 	(fp_poly
 		(pts
-			(xy -2.2352 2.6416) (xy -1.8288 2.6416) (xy -1.8288 3.2512) (xy -2.2352 3.2512)
+			(xy -1.2714 4.127) (xy -0.865 4.127) (xy -0.865 4.7366) (xy -1.2714 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -431,52 +436,52 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "6e5990fc-9a52-480e-b640-cabfc2a6cd18")
+		(uuid "3fef23e2-4bcd-4924-97f4-7575ce7994b1")
 	)
 	(fp_line
-		(start -11.3538 -7.6454)
-		(end -11.3538 8.8138)
+		(start -10.39 -6.16)
+		(end -10.39 10.2992)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "e21c3eb0-fdf3-4a2d-9d84-f366a7426b90")
+		(uuid "bc1192d1-b770-4e65-bd6d-2beed31fb275")
 	)
 	(fp_line
-		(start -11.3538 -7.6454)
-		(end 10.3378 -7.6708)
+		(start -10.39 -6.16)
+		(end 11.3016 -6.1854)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "f2231139-582f-43f7-a92f-646e424ad044")
+		(uuid "ac2ec45c-be62-4db0-88df-ef12d1f24714")
 	)
 	(fp_line
-		(start -11.3538 8.8138)
-		(end 10.3378 8.8138)
+		(start -10.39 10.2992)
+		(end 11.3016 10.2992)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "ff2d64a2-f244-4e27-a61c-b0184f18f038")
+		(uuid "90a38e33-4119-4758-ac3b-323f8c73139c")
 	)
 	(fp_line
-		(start 10.3378 -7.6708)
-		(end 10.3378 8.8138)
+		(start 11.3016 -6.1854)
+		(end 11.3016 10.2992)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "e571d0ae-d587-45ad-9b62-7a686b2f0c60")
+		(uuid "22193204-ae0b-4462-95d6-f226e27ae968")
 	)
 	(fp_text user "-"
-		(at 6.4262 -4.9276 0)
+		(at 7.39 -3.4422 0)
 		(layer "F.SilkS")
-		(uuid "4f88e670-b848-4271-a5f8-bd548b64cadd")
+		(uuid "0bec24d9-5468-4c4b-96d3-ef96e25202cf")
 		(effects
 			(font
 				(size 1 1)
@@ -485,9 +490,9 @@
 		)
 	)
 	(fp_text user "-"
-		(at -8.1534 -4.9276 0)
+		(at -7.1896 -3.4422 0)
 		(layer "F.SilkS")
-		(uuid "86dab817-ad16-4cdc-b19d-607ba0d990ab")
+		(uuid "0c9a77a8-8422-401b-a5a1-b40da4e203c0")
 		(effects
 			(font
 				(size 1 1)
@@ -496,9 +501,9 @@
 		)
 	)
 	(fp_text user "VOUT"
-		(at 8.8138 0.0508 -90)
+		(at 9.7776 1.5362 -90)
 		(layer "F.SilkS")
-		(uuid "876b8e16-62cc-4ae3-9c78-14a6cc337309")
+		(uuid "3c0d7914-45a5-4bbb-8f5b-40ede46c7d70")
 		(effects
 			(font
 				(size 1 1)
@@ -507,9 +512,9 @@
 		)
 	)
 	(fp_text user "+"
-		(at 6.5278 5.7277 0)
+		(at -7.1388 7.2385 0)
 		(layer "F.SilkS")
-		(uuid "935ff27f-9949-446d-a438-f14c3624acfc")
+		(uuid "4145e214-17c8-4e57-9147-ea318329ca66")
 		(effects
 			(font
 				(size 1 1)
@@ -518,9 +523,9 @@
 		)
 	)
 	(fp_text user "4.5-28V"
-		(at -9.7536 0.3048 -90)
+		(at -8.7898 1.7902 -90)
 		(layer "F.SilkS")
-		(uuid "d89e1384-2d5d-4d2d-bcf8-24657a3939a7")
+		(uuid "9e9858d1-9320-4297-aaee-1e9bd601ead9")
 		(effects
 			(font
 				(size 1 1)
@@ -529,9 +534,9 @@
 		)
 	)
 	(fp_text user "+"
-		(at -8.1026 5.7531 0)
+		(at 7.4916 7.2131 0)
 		(layer "F.SilkS")
-		(uuid "e3820af4-2c8f-4e79-b4d3-6c49dcea8bb5")
+		(uuid "c1d9d6ad-e0e9-47c6-989c-71feb1923647")
 		(effects
 			(font
 				(size 1 1)
@@ -540,68 +545,68 @@
 		)
 	)
 	(pad "1" thru_hole rect
-		(at -10.16 4.572 90)
+		(at -9.1962 6.1704 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "6550b245-c3c7-4898-8573-6476b3094631")
+		(uuid "7be89935-c19e-4baa-904a-69452ec23d23")
 	)
 	(pad "1" thru_hole rect
-		(at -10.16 7.112 90)
+		(at -9.1962 8.7104 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "2c55b3c8-f1e1-407a-8b02-310137232038")
+		(uuid "8f4284a4-3768-4b1e-9962-d551ccf57e63")
 	)
 	(pad "2" thru_hole oval
-		(at -10.1854 -3.683 90)
+		(at -9.2216 -2.1976 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "6f8804ba-99ab-459b-84ff-3c356b03222a")
+		(uuid "1f87148a-c7c2-483f-b799-2ff5e01ff488")
 	)
 	(pad "2" thru_hole oval
-		(at -10.16 -6.223 90)
+		(at -9.1962 -4.7376 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "b8ed6aef-b96f-4eb3-a1a2-2deefde02bbb")
+		(uuid "bf2458a2-a107-48c3-bb88-9e881f49434c")
 	)
 	(pad "3" thru_hole rect
-		(at 8.636 4.699 90)
+		(at 9.5998 6.1844 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "5892046d-9427-451a-9d67-551089438a5d")
+		(uuid "69cb71b1-224d-4fe7-8b14-ee9b1da593fb")
 	)
 	(pad "3" thru_hole rect
-		(at 8.636 7.239 90)
+		(at 9.5998 8.7244 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "519792c2-361a-4982-84bb-b0360a514c29")
+		(uuid "39b44515-755a-4a18-9e94-5d0b3431f548")
 	)
 	(pad "4" thru_hole oval
-		(at 8.7376 -3.683 90)
+		(at 9.7014 -2.1976 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "efe9e9b1-891f-4b33-a064-306161845044")
+		(uuid "6af0a541-44c2-41dc-9c4e-37db310350d6")
 	)
 	(pad "4" thru_hole oval
-		(at 8.763 -6.223 90)
+		(at 9.7268 -4.7376 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "16f7d0b3-7073-4c65-a466-c8a09376cdd7")
+		(uuid "204e6602-d630-4983-8e4d-fb59a5c65572")
 	)
 	(model "${KISYS3DMOD}/Module.3dshapes/Arduino_UNO_R2.wrl"
 		(offset

KiCad/CanGrow/gerber/CanGrow-B_Mask.gbs

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*
-G04 #@! TF.CreationDate,2024-07-25T21:16:30+02:00*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:30*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -55,9 +55,9 @@ G04 Aperture macros list end*
 %ADD33RoundRect,0.250000X0.550000X0.550000X-0.550000X0.550000X-0.550000X-0.550000X0.550000X-0.550000X0*%
 G04 APERTURE END LIST*
 D10*
-X153500000Y-108750000D03*
+X156600000Y-108750000D03*
 D11*
-X153500000Y-111250000D03*
+X156600000Y-111250000D03*
 D12*
 X127400000Y-42690000D03*
 D13*
@@ -81,6 +81,18 @@ D11*
 X139900000Y-53320000D03*
 D14*
 X139900000Y-63480000D03*
+D10*
+X130748000Y-108846000D03*
+X130748000Y-111386000D03*
+D14*
+X130722600Y-100478000D03*
+X130748000Y-97938000D03*
+D10*
+X149544000Y-108860000D03*
+X149544000Y-111400000D03*
+D14*
+X149645600Y-100478000D03*
+X149671000Y-97938000D03*
 D11*
 X177750000Y-92250000D03*
 D14*
@@ -272,18 +284,6 @@ X138370000Y-72370000D03*
 D29*
 X136300000Y-71100000D03*
 X138370000Y-69830000D03*
-D10*
-X128204000Y-108823000D03*
-X128204000Y-111363000D03*
-D14*
-X128178600Y-100455000D03*
-X128204000Y-97915000D03*
-D10*
-X147000000Y-108837000D03*
-X147000000Y-111377000D03*
-D14*
-X147101600Y-100455000D03*
-X147127000Y-97915000D03*
 D17*
 X106760000Y-66240000D03*
 D22*
@@ -306,9 +306,9 @@ D11*
 X181830000Y-85750000D03*
 X181830000Y-88250000D03*
 D10*
-X122250000Y-108750000D03*
+X123600000Y-108750000D03*
 D11*
-X122250000Y-111250000D03*
+X123600000Y-111250000D03*
 D17*
 X106870000Y-39160000D03*
 D22*

KiCad/CanGrow/gerber/CanGrow-B_Paste.gbp

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*
-G04 #@! TF.CreationDate,2024-07-25T21:16:30+02:00*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:30*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-B_Silkscreen.gbo

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*
-G04 #@! TF.CreationDate,2024-07-25T21:16:30+02:00*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:30*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -138,9 +138,9 @@ X156800000Y-70000000D01*
 X156300000Y-72000000D01*
 %LPC*%
 D12*
-X153500000Y-108750000D03*
+X156600000Y-108750000D03*
 D13*
-X153500000Y-111250000D03*
+X156600000Y-111250000D03*
 D14*
 X127400000Y-42690000D03*
 D15*
@@ -164,6 +164,18 @@ D13*
 X139900000Y-53320000D03*
 D16*
 X139900000Y-63480000D03*
+D12*
+X130748000Y-108846000D03*
+X130748000Y-111386000D03*
+D16*
+X130722600Y-100478000D03*
+X130748000Y-97938000D03*
+D12*
+X149544000Y-108860000D03*
+X149544000Y-111400000D03*
+D16*
+X149645600Y-100478000D03*
+X149671000Y-97938000D03*
 D13*
 X177750000Y-92250000D03*
 D16*
@@ -355,18 +367,6 @@ X138370000Y-72370000D03*
 D31*
 X136300000Y-71100000D03*
 X138370000Y-69830000D03*
-D12*
-X128204000Y-108823000D03*
-X128204000Y-111363000D03*
-D16*
-X128178600Y-100455000D03*
-X128204000Y-97915000D03*
-D12*
-X147000000Y-108837000D03*
-X147000000Y-111377000D03*
-D16*
-X147101600Y-100455000D03*
-X147127000Y-97915000D03*
 D19*
 X106760000Y-66240000D03*
 D24*
@@ -389,9 +389,9 @@ D13*
 X181830000Y-85750000D03*
 X181830000Y-88250000D03*
 D12*
-X122250000Y-108750000D03*
+X123600000Y-108750000D03*
 D13*
-X122250000Y-111250000D03*
+X123600000Y-111250000D03*
 D19*
 X106870000Y-39160000D03*
 D24*

KiCad/CanGrow/gerber/CanGrow-Edge_Cuts.gm1

@@ -1,11 +1,11 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*
-G04 #@! TF.CreationDate,2024-07-25T21:16:30+02:00*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:30*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-F_Mask.gts

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*
-G04 #@! TF.CreationDate,2024-07-25T21:16:30+02:00*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:30*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -55,9 +55,9 @@ G04 Aperture macros list end*
 %ADD33RoundRect,0.250000X0.550000X0.550000X-0.550000X0.550000X-0.550000X-0.550000X0.550000X-0.550000X0*%
 G04 APERTURE END LIST*
 D10*
-X153500000Y-108750000D03*
+X156600000Y-108750000D03*
 D11*
-X153500000Y-111250000D03*
+X156600000Y-111250000D03*
 D12*
 X127400000Y-42690000D03*
 D13*
@@ -81,6 +81,18 @@ D11*
 X139900000Y-53320000D03*
 D14*
 X139900000Y-63480000D03*
+D10*
+X130748000Y-108846000D03*
+X130748000Y-111386000D03*
+D14*
+X130722600Y-100478000D03*
+X130748000Y-97938000D03*
+D10*
+X149544000Y-108860000D03*
+X149544000Y-111400000D03*
+D14*
+X149645600Y-100478000D03*
+X149671000Y-97938000D03*
 D11*
 X177750000Y-92250000D03*
 D14*
@@ -272,18 +284,6 @@ X138370000Y-72370000D03*
 D29*
 X136300000Y-71100000D03*
 X138370000Y-69830000D03*
-D10*
-X128204000Y-108823000D03*
-X128204000Y-111363000D03*
-D14*
-X128178600Y-100455000D03*
-X128204000Y-97915000D03*
-D10*
-X147000000Y-108837000D03*
-X147000000Y-111377000D03*
-D14*
-X147101600Y-100455000D03*
-X147127000Y-97915000D03*
 D17*
 X106760000Y-66240000D03*
 D22*
@@ -306,9 +306,9 @@ D11*
 X181830000Y-85750000D03*
 X181830000Y-88250000D03*
 D10*
-X122250000Y-108750000D03*
+X123600000Y-108750000D03*
 D11*
-X122250000Y-111250000D03*
+X123600000Y-111250000D03*
 D17*
 X106870000Y-39160000D03*
 D22*

KiCad/CanGrow/gerber/CanGrow-F_Paste.gtp

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*
-G04 #@! TF.CreationDate,2024-07-25T21:16:30+02:00*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:30*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-NPTH-drl_map.gbr

@@ -1,12 +1,12 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*%
-%TF.CreationDate,2024-07-25T21:16:32+02:00*%
+%TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*%
+%TF.CreationDate,2024-09-25T02:09:35+02:00*%
 %TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*%
 %TF.SameCoordinates,Original*%
 %TF.FileFunction,Drillmap*%
 %TF.FilePolarity,Positive*%
 %FSLAX45Y45*%
 G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:32*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:35*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-NPTH.drl

@@ -1,8 +1,8 @@
 M48
-; DRILL file {KiCad 8.0.4} date 2024-07-25T21:16:31+0200
+; DRILL file {KiCad 8.0.5} date 2024-09-25T02:09:34+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2024-07-25T21:16:31+02:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.4
+; #@! TF.CreationDate,2024-09-25T02:09:34+02:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.5
 ; #@! TF.FileFunction,NonPlated,1,2,NPTH
 FMAT,2
 METRIC

KiCad/CanGrow/gerber/CanGrow-PTH-drl_map.gbr

@@ -1,12 +1,12 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,8.0.4*%
-%TF.CreationDate,2024-07-25T21:16:32+02:00*%
+%TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*%
+%TF.CreationDate,2024-09-25T02:09:35+02:00*%
 %TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*%
 %TF.SameCoordinates,Original*%
 %TF.FileFunction,Drillmap*%
 %TF.FilePolarity,Positive*%
 %FSLAX45Y45*%
 G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.4) date 2024-07-25 21:16:32*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:35*
 %MOMM*%
 %LPD*%
 G01*
@@ -335,65 +335,65 @@ G75*
 G02*
 X11740000Y-4600000I40000J0D01*
 G01*
-X12265000Y-10875000D02*
+X12400000Y-10875000D02*
 G75*
 G02*
-X12185000Y-10875000I-40000J0D01*
+X12320000Y-10875000I-40000J0D01*
 G01*
-X12185000Y-10875000D02*
+X12320000Y-10875000D02*
 G75*
 G02*
-X12265000Y-10875000I40000J0D01*
+X12400000Y-10875000I40000J0D01*
 G01*
-X12265000Y-11125000D02*
+X12400000Y-11125000D02*
 G75*
 G02*
-X12185000Y-11125000I-40000J0D01*
+X12320000Y-11125000I-40000J0D01*
 G01*
-X12185000Y-11125000D02*
+X12320000Y-11125000D02*
 G75*
 G02*
-X12265000Y-11125000I40000J0D01*
+X12400000Y-11125000I40000J0D01*
 G01*
-X12857860Y-10045500D02*
+X13112260Y-10047800D02*
 G75*
 G02*
-X12777860Y-10045500I-40000J0D01*
+X13032260Y-10047800I-40000J0D01*
 G01*
-X12777860Y-10045500D02*
+X13032260Y-10047800D02*
 G75*
 G02*
-X12857860Y-10045500I40000J0D01*
+X13112260Y-10047800I40000J0D01*
 G01*
-X12860400Y-9791500D02*
+X13114800Y-9793800D02*
 G75*
 G02*
-X12780400Y-9791500I-40000J0D01*
+X13034800Y-9793800I-40000J0D01*
 G01*
-X12780400Y-9791500D02*
+X13034800Y-9793800D02*
 G75*
 G02*
-X12860400Y-9791500I40000J0D01*
+X13114800Y-9793800I40000J0D01*
 G01*
-X12860400Y-10882300D02*
+X13114800Y-10884600D02*
 G75*
 G02*
-X12780400Y-10882300I-40000J0D01*
+X13034800Y-10884600I-40000J0D01*
 G01*
-X12780400Y-10882300D02*
+X13034800Y-10884600D02*
 G75*
 G02*
-X12860400Y-10882300I40000J0D01*
+X13114800Y-10884600I40000J0D01*
 G01*
-X12860400Y-11136300D02*
+X13114800Y-11138600D02*
 G75*
 G02*
-X12780400Y-11136300I-40000J0D01*
+X13034800Y-11138600I-40000J0D01*
 G01*
-X12780400Y-11136300D02*
+X13034800Y-11138600D02*
 G75*
 G02*
-X12860400Y-11136300I40000J0D01*
+X13114800Y-11138600I40000J0D01*
 G01*
 X13220000Y-5080000D02*
 G75*
@@ -555,45 +555,45 @@ G75*
 G02*
 X14688500Y-3960000I40000J0D01*
 G01*
-X14740000Y-10883700D02*
+X14994400Y-10886000D02*
 G75*
 G02*
-X14660000Y-10883700I-40000J0D01*
+X14914400Y-10886000I-40000J0D01*
 G01*
-X14660000Y-10883700D02*
+X14914400Y-10886000D02*
 G75*
 G02*
-X14740000Y-10883700I40000J0D01*
+X14994400Y-10886000I40000J0D01*
 G01*
-X14740000Y-11137700D02*
+X14994400Y-11140000D02*
 G75*
 G02*
-X14660000Y-11137700I-40000J0D01*
+X14914400Y-11140000I-40000J0D01*
 G01*
-X14660000Y-11137700D02*
+X14914400Y-11140000D02*
 G75*
 G02*
-X14740000Y-11137700I40000J0D01*
+X14994400Y-11140000I40000J0D01*
 G01*
-X14750160Y-10045500D02*
+X15004560Y-10047800D02*
 G75*
 G02*
-X14670160Y-10045500I-40000J0D01*
+X14924560Y-10047800I-40000J0D01*
 G01*
-X14670160Y-10045500D02*
+X14924560Y-10047800D02*
 G75*
 G02*
-X14750160Y-10045500I40000J0D01*
+X15004560Y-10047800I40000J0D01*
 G01*
-X14752700Y-9791500D02*
+X15007100Y-9793800D02*
 G75*
 G02*
-X14672700Y-9791500I-40000J0D01*
+X14927100Y-9793800I-40000J0D01*
 G01*
-X14672700Y-9791500D02*
+X14927100Y-9793800D02*
 G75*
 G02*
-X14752700Y-9791500I40000J0D01*
+X15007100Y-9793800I40000J0D01*
 G01*
 X15048000Y-6650000D02*
 G75*
@@ -625,26 +625,6 @@ G75*
 G02*
 X15350000Y-7801000I40000J0D01*
 G01*
-X15390000Y-10875000D02*
-G75*
-G02*
-X15310000Y-10875000I-40000J0D01*
-G01*
-X15310000Y-10875000D02*
-G75*
-G02*
-X15390000Y-10875000I40000J0D01*
-G01*
-X15390000Y-11125000D02*
-G75*
-G02*
-X15310000Y-11125000I-40000J0D01*
-G01*
-X15310000Y-11125000D02*
-G75*
-G02*
-X15390000Y-11125000I40000J0D01*
-G01*
 X15690000Y-6786000D02*
 G75*
 G02*
@@ -655,6 +635,26 @@ G75*
 G02*
 X15690000Y-6786000I40000J0D01*
 G01*
+X15700000Y-10875000D02*
+G75*
+G02*
+X15620000Y-10875000I-40000J0D01*
+G01*
+X15620000Y-10875000D02*
+G75*
+G02*
+X15700000Y-10875000I40000J0D01*
+G01*
+X15700000Y-11125000D02*
+G75*
+G02*
+X15620000Y-11125000I-40000J0D01*
+G01*
+X15620000Y-11125000D02*
+G75*
+G02*
+X15700000Y-11125000I40000J0D01*
+G01*
 X17015000Y-5080000D02*
 G75*
 G02*

KiCad/CanGrow/gerber/CanGrow-PTH.drl

@@ -1,8 +1,8 @@
 M48
-; DRILL file {KiCad 8.0.4} date 2024-07-25T21:16:31+0200
+; DRILL file {KiCad 8.0.5} date 2024-09-25T02:09:34+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2024-07-25T21:16:31+02:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.4
+; #@! TF.CreationDate,2024-09-25T02:09:34+02:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.5
 ; #@! TF.FileFunction,Plated,1,2,PTH
 FMAT,2
 METRIC
@@ -76,12 +76,12 @@ X116.91Y-100.25
 X116.93Y-90.98
 X117.0Y-42.42
 X117.0Y-46.0
-X122.25Y-108.75
-X122.25Y-111.25
-X128.179Y-100.455
-X128.204Y-97.915
-X128.204Y-108.823
-X128.204Y-111.363
+X123.6Y-108.75
+X123.6Y-111.25
+X130.723Y-100.478
+X130.748Y-97.938
+X130.748Y-108.846
+X130.748Y-111.386
 X131.8Y-50.8
 X133.0Y-35.15
 X133.0Y-45.31
@@ -98,16 +98,16 @@ X144.2Y-74.3
 X144.2Y-84.46
 X146.48Y-32.6
 X146.485Y-39.6
-X147.0Y-108.837
-X147.0Y-111.377
-X147.102Y-100.455
-X147.127Y-97.915
+X149.544Y-108.86
+X149.544Y-111.4
+X149.646Y-100.478
+X149.671Y-97.938
 X150.08Y-66.5
 X153.1Y-67.85
 X153.1Y-78.01
-X153.5Y-108.75
-X153.5Y-111.25
 X156.5Y-67.86
+X156.6Y-108.75
+X156.6Y-111.25
 X169.75Y-50.8
 X177.75Y-92.25
 X181.83Y-85.75

README.md

@@ -4,25 +4,63 @@
 ![CanGrowLogo](Logo/CanGrow_Logo.png)
 
 
-A simple DIY plant growing system (for cannabis).
+An easy to use DIY grow controller firmware (for cannabis).
 
-![CanGrow_PCB_Front.png](KiCad/CanGrow/CanGrow_PCB_Front_small.png)
 ![Screenshot_WebUI_root.png](Arduino/CanGrow/Screenshot_WebUI_root.png)
+![CanGrow_PCB_Front.png](KiCad/CanGrow/CanGrow_PCB_Front_small.png)
 
 # WORK IN PROGRESS
 
 ## Motivation
+I havn't found an already existing grow controller project within the ESP / Arduino Core eco system which 
+met my personal requirements. 
+Those are an easy DIY, using low cost parts, Arduino Core sourcecode to hack own things together, having a WebUI, grab some Metrics for monitoring, standalone and my very special need that the Hardware should run completely with 12V. 
 
-I want to build a simple grow system, which I can power by my off-grid
-12V solar system. So this project is limited to a small 40x40x120 tent
-for one plant with a 50W 12V grow LED light.
+### Update 14.09.2024 - Code Rewrite v0.2
 
-As I did it for my solar system, the measurements of this project will be shown
-on my website. For that a REST API is planned.
+I took some "summer break" from the project, and had the opportunity to talk to different people about it.
+My conclusion at this point is, that the focus of this project is not the Hardware, it came out that it should be the software.
+So I decided to completely rewrite the code from 0 - with recycling some parts of it. 
+Goal of the Rewrite is that the Firmware becomes more independent of the hardware used. It has to support both ESP8266 and ESP32 
+and let the user decide at which pin which output, sensor or whatever will be connected to. Like done in the [Tasmota](https://github.com/arendst/Tasmota) Firmware, I also want to support "Hardware Templates" which come with presets for PCBs like the one I created.
 
-I want to automate as much as possible which makes sense and is easy to build.
+**Checklist for v0.2 Firmware**
+- Support ESP8266 and ESP32 
+- AsyncWebserver instead ESP8266Webserver
+- LittleFS instead of EEPROM()
+- deliver static HTML, dynamic Stuff with Javascript
+  - (or is there a better way? please tell me!)
+- Free configurable outputs
+  - Main outputs for Light, Air, Water 
+  - Support for Tasmota Wifi Plugs (and others?)
+  - No Limitation for Amount of outputs 
+  - Light
+    - support for I2C 0-10V Dimm control
+    - PWM dimm control
+  - Air
+    - support for I2C 0-10V Dimm control
+    - PWM dimm control
+    - Support for humidifier, heater (, CO2?)
+    - Read Fan RPM
+  - Water
+    - Usual watering
+    - Pump for fertilizer
+- Free configurable Inputs
+  - Support for various I2C devices
+    - All kind of sensors for Temp, Humidity, Moisture, and so on
+    - Support for ADCs to connect multiple analoge sensors
+  - Support for Analog inputs
+    - onboard ones or I2C (ADC)
+    - Analog Multiplexer support (like CD4051)
+  - Calibrate sensors 
+    - define 0% and 100% values
+    - Offsets
+- MQTT support
+- API
 
-## Features / ToDo List
+  
+  
+## Old v0.1 Features / ToDo List
 
 - Measure values :white_check_mark:
   - Humidity :white_check_mark:
@@ -54,14 +92,3 @@ I want to automate as much as possible which makes sense and is easy to build.
   - low cost as possible! :white_check_mark:
 
 :white_check_mark: Done - :large_blue_circle: In Progress - :red_circle: ToDo
-
-## Parts used
-
-- ESP8266 D1 mini
-- BME280 humidity and temp sensor
-- I2C soil moisture sensor: https://github.com/Miceuz/i2c-moisture-sensor /  https://eu.robotshop.com/de/products/i2c-soil-moisture-sensor
-- cheap capacitive soilmoisture sensor: https://www.az-delivery.de/products/bodenfeuchte-sensor-modul-v1-2
-
-- 50W LED 12V full spectrum grow light: https://www.ebay.de/itm/354322466159
-- MOSFETS (some i have fyling around, IRFZ44, IRF3205, IRF3710, BUZZ11...)
-- 12V 4W water pump set https://www.ebay.de/itm/394413649692

cangrow.sh

@@ -8,7 +8,7 @@ BUILD="$(git rev-parse --short HEAD)-$(date '+%Y%m%d%H%M%S')"
 
 ACLI="$HOME/.local/bin/arduino-cli"
 ACLI_CMD="$ACLI --config-file arduino-cli.yml"
-
+BOARD="esp8266:esp8266:d1_mini_clone"
 
 function help() {
 	echo "$0 [setup|build|upload|webupload|monitor]"
@@ -44,7 +44,7 @@ case $1 in
 		echo ""
 		echo ":: Installing Arduino IDE packages with apt, please enter sudo password:"
 		sudo apt update 
-		sudo apt install arduino python3 wget curl
+		sudo apt install arduino python3 wget curl xxd
 		echo ":: Ensure directory ${ACLI_DIR} is present"
 		test -d ${ACLI_DIR} || mkdir -p ${ACLI_DIR}
 		echo ":: Please ensure ${ACLI_DIR} is in your \$PATH, I wont do it."
@@ -79,13 +79,13 @@ case $1 in
 const char* CanGrowVer = \"${VER}\";
 const char* CanGrowBuild = \"${BUILD}\";
 " > Arduino/CanGrow/CanGrow_Version.h
-		${ACLI_CMD} --no-color compile -b esp8266:esp8266:d1_mini_clone  "Arduino/CanGrow/CanGrow.ino" --output-dir build/ || exit 1
+		${ACLI_CMD} --no-color compile -b ${BOARD}  "Arduino/CanGrow/CanGrow.ino" --output-dir build/ || exit 1
 		cp build/CanGrow.ino.bin build/CanGrow_v${VER}_${BUILD}.bin
 		;;
 	u|upload)
 		check_acli
 		echo ":: Uploading to $TTY"
-		${ACLI_CMD} --no-color compile -v  -b esp8266:esp8266:d1_mini_clone -u -p $TTY  "Arduino/CanGrow/CanGrow.ino"
+		${ACLI_CMD} --no-color compile -v  -b ${BOARD} -u -p $TTY  "Arduino/CanGrow/CanGrow.ino"
 		;;
 	w|webupload)
 		echo ":: Uploading to $IP"
@@ -95,7 +95,7 @@ const char* CanGrowBuild = \"${BUILD}\";
 	m|mon|monitor)
 		check_acli
 		echo ":: Open serial monitor $TTY"
-		${ACLI_CMD} monitor -c baudrate=115200 -p $TTY
+		${ACLI_CMD} monitor -c baudrate=115200 -b ${BOARD} -p $TTY
 		;;
 	*)
 		help