set Wire.setClockStretchLimit(2500) because aliexpress chirp clone does not work correctly

Arduino/CanGrow/CanGrow.ino

@@ -71,16 +71,16 @@ void setup() {
   
   
   // set all OUTPUT to low
-  digitalWrite(PinFAN, LOW);
+  digitalWrite(PinFAN, HIGH);
   digitalWrite(PINwaterlevel, LOW);
-  digitalWrite(PinLED, LOW);
+  digitalWrite(PinLED, HIGH);
-  digitalWrite(PinPUMP, LOW);
+  digitalWrite(PinPUMP, HIGH);
   // except PINsoilmoisture
   // PINsoilmoisture is always HIGH and gets LOW in moment of waterlevel measurement
   digitalWrite(PINsoilmoisture, LOW);
   
-  // set PWM frequency to 2.2KHz
+  // set PWM frequency to 13.37KHz
-  analogWriteFreq(2200);
+  analogWriteFreq(13370);
 
   // Start EEPROM
   EEPROM.begin(512);
@@ -100,7 +100,7 @@ void setup() {
   Serial.println(":: initialise I2C ::");  
   // initialise Wire for I2C
   Wire.begin();
-  
+  Wire.setClockStretchLimit(2500); 
   Serial.println(":: initialise display ::");
   // initialise I2C display
   display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x64
@@ -239,7 +239,7 @@ void loop() {
       controlLED();
     }
     
-    
+    controlPUMP();
     
     displayScreens();
     
@@ -265,7 +265,7 @@ void loop() {
  * - re-organize EEPROM saved values. 
  * - prevent GrowStart to be in the future
  * - maybe let the user configure some screens to display.
- *    
+ * - put EEPROM adresses into DEFINEs 
 */
   
   
@@ -273,6 +273,14 @@ void loop() {
 
   
   
+/*
+ * Fan control
+ * 
+ * Vars:
+ *   - FanVent (byte) Fan1 or Fan2
+ *   - FanExhaust (byte) Fan1 or Fan2
+ *   - 
+ */  
 
 
   

Arduino/CanGrow/CanGrow_HTML.h

@@ -74,6 +74,9 @@ a:active {
   width: 42px;
 }
 
+.helpbox {
+  font-size: 0.8em;
+}
 .nav {
   background: #333;
   width: 100%; 
@@ -210,8 +213,8 @@ const char HTMLhelp[] PROGMEM = R"EOF(
 <h2>&#x2753; Help</h2>
 Here you will get some helpful help.
 <h3>API</h3>
-Sensor data: <code>GET /api/sensors</code>
+<a href='/api/sensors' target='_blank'>Sensor data</a>: <code>GET /api/sensors</code><br>
-Debug all data: <code>GET /api/debug</code>
+<a href='/api/debug' target='_blank'>Debug all data:</a> <code>GET /api/debug</code>
 )EOF";
 
 
@@ -505,10 +508,10 @@ const char HTMLgauge[] PROGMEM = R"EOF(
 
 const char HTMLupdate[] PROGMEM = R"EOF(
 <p>You find the latest CanGrow firmware version on the <a href='https://git.la10cy.net/DeltaLima/CanGrow/releases' target='_blank'>release page</a> of the git repository.</p>
-<form method='POST' action='/system/applyUpdate' enctype='multipart/form-data'>
+<form method='POST' action='/system/applyUpdate' enctype='multipart/form-data' onsubmit="document.getElementById('divUploading').style.display = '';">
    <b>Select .bin file:</b><br>
-   <input type='file' accept='.bin,.bin.gz' name='firmware'>
+   <input type='file' accept='.bin,.bin.gz' name='firmware' required>
-   <input type='submit' value='Update Firmware' onclick="document.getElementById('divUploading').style.display = '';">
+   <input type='submit' value='Update Firmware'>
 </form>
 <div id='divUploading' style='display: none;' class='warnmsg'>&#x1F6DC; Uploading, please wait...<div>
 )EOF";

Arduino/CanGrow/CanGrow_Init.h

@@ -19,7 +19,7 @@ const bool APhidden = false;
  */
 
 // valSoilmoisture - contains the value of getSoilmoisture()
-byte valSoilmoisture;
+unsigned short valSoilmoisture;
 // valTemperature - contains the value of getTemperature()
 float valTemperature;
 // valTemperature - contains the value of getHumidity()
@@ -38,6 +38,18 @@ byte ScreenIterationPassed = 0;
 bool MaintenanceMode = false;
 unsigned long MaintenanceStarted = 0;
 
+// helper variable to remember how many seconds the pump was
+// already on within the actual watering cycle
+byte PumpOnTimePassed = 0;
+bool PumpOnManual = false;
+
+// helper variable for pump control with soilmoisture
+// average of last readings
+unsigned short valSoilmoistureAvg = 0;
+unsigned short valSoilmoistureAvg_tmp = 0;
+byte valSoilmoistureAvg_count = 0;
+//unsigned short 
+
 /*
  * millis timer
  * 
@@ -79,12 +91,14 @@ short NtpOffset;
 // 2: I2C chirp sensor from catnip electronics
 byte MoistureSensor_Type;
 // SoilmoistureLow - contains the value , when soil moisture is assumed to be low, 
-byte SoilmoistureLow = 20;
+byte SoilmoistureLow = 80;
 // UsePump - is the pump used? bool
-bool UsePump;
+// PumpMode (short) 1: Pump on every n days, 2: Pump on when Soilmoisture <= SoilmoistureLow, 3: Both
+byte UsePump;
 // UseFan - is the fan used? bool
+// PumpOnTime in seconds
 byte PumpOnTime = 3;
-bool UseFan;
+byte UseFan;
 // In case the user uses no 12V LED on the LED output and an relais instead
 // we have to disable PWM. So we ask here for what kind of light user is going
 bool UseLEDrelais;
@@ -93,6 +107,10 @@ bool UseFANrelais;
 byte TemperatureSensor_Type;
 unsigned short MaintenanceDuration = 300;
 char Esp32CamIP[16];
+// PumpLastOn (long) timestamp
+unsigned long PumpLastOn;
+
+
 
 //
 // Grow Stuff
@@ -127,6 +145,10 @@ byte PinFANPWM = 255;
 bool SunFade;
 byte SunFadeDuration = 30;
 
+// PumpIntervalVeg (int) in days
+byte PumpIntervalVeg = 5;
+byte PumpIntervalBloom = 3;
+
 /*
  * 
  * NTP

Arduino/CanGrow/CanGrow_Sensors.h

@@ -187,7 +187,13 @@ int getSoilmoisture(byte moistureSensor, bool returnRAW = false) {
   if(returnRAW == true) {
     return soilmoisture;
     } else {
-      return map(soilmoisture, wet, dry, 100, 0);
+      short soilmoistureP = map(soilmoisture, wet, dry, 100, 0);
+      // dont return negative percentage values
+      if(soilmoistureP < 0) {
+        return 0;
+      } else {
+        return soilmoistureP;
+      }
     }
 }
 

Arduino/CanGrow/CanGrow_SysFunctions.h

@@ -104,7 +104,10 @@ bool loadEEPROM() {
    * 218 SunFadeDuration 
    * 219 MaintenanceDuration (2 byte)
    * 221 Esp32CamIP (16 byte) 
-   * 237 ...
+   * 237 PumpLastOn (4 byte)
+   * 241 PumpIntervalVeg (1 byte)
+   * 242 PumpIntervalBloom (1 byte)
+   * 243 ...
    * 
    */
    
@@ -168,6 +171,9 @@ bool loadEEPROM() {
       EEPROM.get(219, MaintenanceDuration);
       // size is 16 byte
       EEPROM.get(221, Esp32CamIP);      
+      // size is 4 byte
+      EEPROM.get(237, PumpLastOn);
+
     }
     // TODO auth does not work atm 
     // EEPROM.get(160, WebUiUsername);
@@ -202,6 +208,10 @@ bool loadEEPROM() {
       EEPROM.get(216, PinFANPWM);
       EEPROM.get(217, SunFade);
       EEPROM.get(218, SunFadeDuration);
+      // size is 1 byte
+      EEPROM.get(241, PumpIntervalVeg);
+      // size is 1 byte
+      EEPROM.get(242, PumpIntervalBloom);
       
     }
 
@@ -360,6 +370,30 @@ void wifiAp() {
     //Serial.println("The login credentials for the WebUI are 'cangrow' for username and password");
 }
 
+unsigned short growState() {
+/*
+ * growState()
+ * 
+ * returns growState as short
+ * 
+ * 1 - vegetation
+ * 2 - bloom
+ * 3 - harvest
+ * 
+ */
+  unsigned short state;
+  
+  if(DayOfGrow > (DaysVeg + DaysBloom ) ) {
+    state = 3;
+  } else if(DayOfGrow > DaysVeg ) {
+    state = 2;
+  } else {
+    state = 1;
+  }
+  
+  return state;
+}
+
 void setOutput(byte Output, byte OutputState) {
   /*
    * Pin assignments
@@ -405,9 +439,9 @@ void setOutput(byte Output, byte OutputState) {
   //~ Serial.println(UseRelais);
   
   if( (UseRelais == true) || (OutputPin == PinPUMP) ) {
-    digitalWrite(OutputPin, OutputState);
+    digitalWrite(OutputPin, 1 - OutputState);
   } else {
-    analogWrite(OutputPin, OutputState);
+    analogWrite(OutputPin, 255 - OutputState);
   }
 }
 
@@ -418,15 +452,22 @@ void controlLED() {
   unsigned int secondsSunrise = (SunriseHour * 60 * 60) + (SunriseMinute * 60);
   unsigned int secondsToday = (timeClient.getHours() * 60 * 60) + (timeClient.getMinutes() * 60) + timeClient.getSeconds();
   
-  if(DayOfGrow > DaysVeg ) {
+  switch(growState()) {
-    lightHours = LighthoursBloom;
+    case 1:
-  } else {
       lightHours = LighthoursVeg;
+    break;
+    
+    case 2:
+      lightHours = LighthoursBloom;
+    break;
+    default:
+      lightHours = 0;
+    break;
   }
    
   // check if secondsToday is larger then secondsSunrise time AND if 
   // secondsToday is smaller then the sum of secondsSunrise + seconds of lightHours
-  if( ((secondsToday >= secondsSunrise) && (secondsToday <= ( secondsSunrise + (lightHours * 60 * 60))) ) ){
+  if( ((secondsToday >= secondsSunrise) && (secondsToday <= ( secondsSunrise + (lightHours * 60 * 60))) ) && (growState() < 3) ){
     //Serial.println("light on time");
     
     // when SunFade is true, fade LED light. Otherwise just turn on or off
@@ -460,10 +501,25 @@ void controlLED() {
 }
 
 void refreshSensors() {
+  byte soilmoistureAvgSampleCount = 5;
+  
   valSoilmoisture = getSoilmoisture(MoistureSensor_Type);
   valHumidity = getHumidity();
   valTemperature = getTemperature(TemperatureSensor_Type);
   valWaterlevel = getWaterlevel();
+  
+  // get average of 5 readings for valSoilmoisture
+  valSoilmoistureAvg_tmp = valSoilmoistureAvg_tmp + valSoilmoisture;
+  if(valSoilmoistureAvg_count < soilmoistureAvgSampleCount - 1) {
+    valSoilmoistureAvg_count++;
+  } else {
+    // build average
+    valSoilmoistureAvg = valSoilmoistureAvg_tmp / soilmoistureAvgSampleCount;
+    // reset everything
+    valSoilmoistureAvg_tmp = 0;
+    valSoilmoistureAvg_count = 0;
+
+  }
 }
 
 void displayScreens() {
@@ -499,7 +555,8 @@ void displayScreens() {
     display.println("s");
   } else {
   // in this switch case the single screens gets defined
-    switch(ScreenToDisplay) {
+    //switch(ScreenToDisplay) {
+    switch(0) {
       case 0:
         display.print("Humidity: ");
         display.print(valHumidity);
@@ -511,9 +568,10 @@ void displayScreens() {
         display.println("");
         display.print("Moisture: ");
         display.print(valSoilmoisture);
-        display.println(" %");
+        display.print(" % ");
+        display.println(valSoilmoistureAvg);
         display.println("");
-        if(UsePump == true) {
+        if(UsePump > 0) {
           display.print("Pump Waterlvl: ");
           switch(valWaterlevel) {
             case 0:
@@ -567,26 +625,128 @@ void displayScreens() {
 }
 
 
-unsigned short growState() {
 /*
- * growState()
+ * Pump control
  * 
- * returns growState as short
+ * Vars:
+ *   - UsePump (byte)
+ *   - PumpOnTime (byte) in sec
+ *   - SoilmoistureLow (byte) in %
+ *   - PumpLastOn (long) timestamp
+ *   - PumpMode (byte) 1: Pump on every n days, 2: Pump on when Soilmoisture <= SoilmoistureLow, 3: Both
  * 
- * 1 - vegetation
+ *   - PumpIntervalVeg (byte) in days
- * 2 - bloom
+ *   - PumpIntervalBloom (byte) in days
- * 3 - harvest
  * 
  */  
-  unsigned short state;
 
-  if(DayOfGrow > (DaysVeg + DaysBloom ) ) {
+void controlPUMP() {
-    state = 3;
+  byte PumpInterval;
-  } else if(DayOfGrow > DaysVeg ) {
+  
-    state = 2;
+  // UsePump true and not in harvest state?
+  // dont water within the first 15 sec after startup
+  if ( (UsePump > 0) && (growState() < 3) && (millis() > 15000) ) {
+    switch(growState()) {
+      case 1:
+        PumpInterval = PumpIntervalVeg;
+      break;      
+      case 2:
+        PumpInterval = PumpIntervalBloom;
+      break;
+      default:
+        PumpInterval = 0;
+      break;
+    }
+    
+    // when PumpOnManuel is true, turn pump on for PumpOnTime seconds
+    if(PumpOnManual == true) {
+      if(PumpOnTimePassed < PumpOnTime) {
+        setOutput(3, 1);
+        //digitalWrite(PinPUMP, HIGH);
+        PumpOnTimePassed++;
       } else {
-    state = 1;
+        PumpOnManual = false;
+        setOutput(3, 0);
+        //digitalWrite(PinPUMP, LOW);
+        EEPROM.put(237, PumpLastOn);
+        PumpOnTimePassed = 0;
       }
+    // otherwise check which PumpMode to use
+    } else {
+      switch(UsePump) {
+        case 1:
+          // when diff of time now and time pumpLastOn is greater then PumpInterval, do some watering (Or manual watering)
+          if( (timeClient.getEpochTime() - PumpLastOn) >= (PumpInterval) ) { // TODO:  * 24 * 60 * 60 PumpInterval
+            // only water as long PumpOnTime
+            if(PumpOnTimePassed < PumpOnTime) {
+              setOutput(3, 1);
+              //digitalWrite(PinPUMP, HIGH);
+              PumpOnTimePassed++;
+            } else {
+              setOutput(3, 0);
+              //digitalWrite(PinPUMP, LOW);
+              PumpLastOn = timeClient.getEpochTime();
+              // write the value to EEPROM for the case ESP gets restarted
+              EEPROM.put(237, PumpLastOn);
+              PumpOnTimePassed = 0;
+            }
+          } else {
+            setOutput(3, 0);
+            //digitalWrite(PinPUMP, LOW);
+          }
+        break;
         
-  return state;
+        case 2:
+          // when valSoilmoistureAvg is lower then SoilMoisture low do some watering
+          if( (valSoilmoistureAvg < SoilmoistureLow) || ( (valSoilmoistureAvg >= SoilmoistureLow) &&   ( (PumpOnTimePassed > 0) && (PumpOnTimePassed <= PumpOnTime) )  ) ) {
+            // check if we alerady exceeded max PumpOnTime
+            if(PumpOnTimePassed < PumpOnTime) {
+              setOutput(3, 1);
+              //digitalWrite(PinPUMP, HIGH);
+              PumpOnTimePassed++;
+            } else {
+              setOutput(3, 0);
+              //digitalWrite(PinPUMP, LOW);
+              PumpLastOn = timeClient.getEpochTime();
+              PumpOnTimePassed = 0;
+            }
+          // when valSoilmoistureAvg is greater then the Low value,   
+          } else {
+           setOutput(3, 0);
+           //digitalWrite(PinPUMP, LOW);
+          }
+        break;
+        
+        // 
+        case 3:
+          if( ( (timeClient.getEpochTime() - PumpLastOn) >= (PumpInterval) ) && //TODO calculate PumpInterval into days as well here
+            ( (valSoilmoistureAvg < SoilmoistureLow) ||
+              ( (valSoilmoistureAvg >= SoilmoistureLow) &&   ( (PumpOnTimePassed > 0) && (PumpOnTimePassed <= PumpOnTime) ) ) 
+            ) ) {
+            // check if we alerady exceeded max PumpOnTime
+            if(PumpOnTimePassed < PumpOnTime) {
+              setOutput(3, 1);
+              //digitalWrite(PinPUMP, HIGH);
+              PumpOnTimePassed++;
+            } else {
+              setOutput(3, 0);
+              //digitalWrite(PinPUMP, LOW);
+              PumpLastOn = timeClient.getEpochTime();
+              EEPROM.put(237, PumpLastOn);
+              PumpOnTimePassed = 0;
+            }
+          // when valSoilmoistureAvg is greater then the Low value,   
+          } else {
+           setOutput(3, 0);
+           //digitalWrite(PinPUMP, LOW);
+          }
+        break;
+        
+      }
+    }
+  } else {
+    // ensure pump is off when it should be off
+    setOutput(3, 0);
+    //digitalWrite(PinPUMP, LOW);
+  }
 }

Arduino/CanGrow/CanGrow_Version.h

@@ -1,5 +1,5 @@
 /* CanGrow_Version.h gets generated from cangrow.sh */
 
 const char* CanGrowVer = "0.1-dev";
-const char* CanGrowBuild = "72bb58c";
+const char* CanGrowBuild = "d2e264d-20240919022041";
 

Arduino/CanGrow/CanGrow_WebFunctions.h

@@ -180,22 +180,16 @@ void SysRestart() {
 
 void SysWipe() {
   String body = returnHTMLheader();
-  // TODO only debug and development solution, remove this later
-  if(webserver.hasArg("confirmed")) {
-    body += "<div class='warnmsg'><h2>!! Wiping CanGrow's EEPROM !!</h2><br>Device will restart in a few seconds.<br>After restart a new WiFi 'CanGrow-unconfigured' will be created. To access the WebUI visit <a href='http://192.168.4.20'>http://192.168.4.20</a></div>";
-    body += FPSTR(HTMLfooter);
-    webserver.send(200, "text/html", body);
-    wipeEEPROM();
-  } else {
   body += "<h1>&#10071;&#10071; Wiping EEPROM</h1>";
   body += "<div class='warnmsg'>All settings will be removed!!<br>";
   body += "<br>Please confirm wiping the EEPROM";
-    body += "<form action='/system/wipe'><input type='hidden' name='confirmed' value='true' /><input type='submit' value='Confirm wiping' /></form>";
+  body += "<form action='/system/wipeConfirm' method='post'><br>Please confirm: <input type='checkbox' id='confirm' name='confirm' required /><br><input type='submit' value='Confirm wiping' /></form>";
   body += "</div>";
   body += FPSTR(HTMLfooter);
   webserver.send(200, "text/html", body);
+
 }
-}
+
 
 void Sys404() {
   String body = returnHTMLheader();
@@ -368,11 +362,11 @@ void WEBroot() {
         body += "&#x1F33C; bloom<br>\n";
       break;
       case 3: 
-        body += "&#x1F342; harvest<br>\n";
+        body += "&#x1F342; harvest\n";
       break;
     }
       
-    if(UsePump == true) {
+    if(UsePump > 0) {
       body += "<b>Pump water level:</b> ";
       switch(getWaterlevel()) {
         case 0:
@@ -472,19 +466,19 @@ void WEBgrowSettings() {
     
     body += "Vegetation duration: <input class='inputShort' type='number' name='DaysVeg' min='0' max='255' value='";
     body += DaysVeg;
-    body+= "' required>Days<br>\n";
+    body+= "' required>days<br>\n";
     
     body += "Bloom duration: <input class='inputShort' type='number' name='DaysBloom' min='0' max='255' value='";
     body += DaysBloom;
-    body+= "' required> Days<br>\n";
+    body+= "' required> days<br>\n";
     
     body += "Time LED ON vegetation: <input class='inputShort' type='number' name='LighthoursVeg' min='0' max='255' value='";
     body += LighthoursVeg;
-    body+= "' required> Hours<br>\n";
+    body+= "' required> hours<br>\n";
     
     body += "Time LED ON bloom: <input class='inputShort' type='number' name='LighthoursBloom' min='0' max='255' value='";
     body += LighthoursBloom;
-    body+= "' required> Hours<br>\n";
+    body+= "' required> hours<br>\n";
     
     body += "Sunrise: <input class='inputShort' type='number' name='SunriseHour' min='0' max='23' value='";
     body += SunriseHour;
@@ -515,6 +509,20 @@ void WEBgrowSettings() {
       body += "'/> %<br>\n";
     }
     
+    
+    body += "Pump interval vegetation: every <input class='inputShort' type='number' name='PumpIntervalVeg' min='0' max='255' value='";
+    body += PumpIntervalVeg;
+    body += "' required ";
+    if( (UsePump != 1) && UsePump != 3) { body += "readonly"; }
+    body += "> days<br>\n";
+    
+    body += "Pump interval bloom: every <input class='inputShort' type='number' name='PumpIntervalBloom' min='0' max='255' value='";
+    body += PumpIntervalBloom;
+    body += "' required ";
+    if((UsePump != 1) && (UsePump != 3)) { body += "readonly"; }
+    body += "> days<br>\n";
+  
+    
     body += "<input type='submit' value='&#x1F4BE; Save settings'>\n";
     body += "</form>\n"; 
     body += FPSTR(JSconvertDateToEpoch);
@@ -551,18 +559,31 @@ void WEBsystemSettings() {
     body += "<form method='post' action='/systemSettings/save'>\n";
     
     // UseFan bool
-    body += "Use FAN: <select id='UseFan' name='UseFan' required>\n";
+    body += "Fan mode: <select id='UseFan' name='UseFan' required>\n";
     if(configured == false){body += "<option disabled value='' selected hidden>---</option>\n";}
-    body += "<option value='1'" + returnStrSelected(UseFan, 1) + ">Yes</option>\n";
+    body += "<option value='1'" + returnStrSelected(UseFan, 0) + ">Off</option>\n";
-    body += "<option value='0'" + returnStrSelected(UseFan, 0) + ">No</option>\n";
+    body += "<option value='1'" + returnStrSelected(UseFan, 1) + ">Use</option>\n";
+    body += "<option value='0'" + returnStrSelected(UseFan, 2) + ">Do not use</option>\n";
     body += "</select><br>\n";
 
+/*  
     // UsePump bool
     body += "Use PUMP: <select id='UsePump' name='UsePump' required>\n";
     if(configured == false){body += "<option disabled value='' selected hidden>---</option>\n";}
     body += "<option value='1'" + returnStrSelected(UsePump, 1) + ">Yes</option>\n";
     body += "<option value='0'" + returnStrSelected(UsePump, 0) + ">No</option>\n";
     body += "</select><br>\n";
+*/
+    // PumpMode byte
+    body += "Pump mode: <select id='UsePump' name='UsePump' required>\n";
+    if(configured == false){body += "<option disabled value='' selected hidden>---</option>\n";}
+    body += "<option value='0'" + returnStrSelected(UsePump, 0) + ">Off</option>\n";
+    body += "<option value='1'" + returnStrSelected(UsePump, 1) + ">1</option>\n";
+    body += "<option value='2'" + returnStrSelected(UsePump, 2) + ">2</option>\n";
+    body += "<option value='3'" + returnStrSelected(UsePump, 3) + ">3</option>\n";
+    body += "</select><br><p class='helpbox'><b>1:</b> Water every few days.<br> \
+<b>2:</b> Water if the soil moisture falls below <i>Soilmoisture low</i> value<br> \
+<b>3:</b> Water every few days if the soil moisture falls below <i>Soilmoisture low</i> value.</p>\n";
 
     // UseLEDrelais bool
     body += "Use relais for LED: <select id='UseLEDrelais' name='UseLEDrelais' required>\n";
@@ -580,10 +601,11 @@ void WEBsystemSettings() {
     
     // TODO ugly. can this done be better? 
     // PumpOnTime int
-    body += "PUMP ON time: <input class='inputShort' type='number' name='PumpOnTime' min='0' max='255' value='";
+    body += "Pump ON time: <input class='inputShort' type='number' name='PumpOnTime' min='0' max='255' value='";
     body += PumpOnTime;
     body += "' required> Seconds<br>\n";
     
+    
     // MoistureSensor_Type byte
     body += "Soilmoisture sensor: <select id='MoistureSensor_Type' name='MoistureSensor_Type' required>\n";
     if(configured == false) {
@@ -741,6 +763,8 @@ void POSTgrowSettings() {
   SunriseMinute = webserver.arg("SunriseMinute").toInt();
   SunFade = webserver.arg("SunFade").toInt();
   SunFadeDuration = webserver.arg("SunFadeDuration").toInt();
+  PumpIntervalVeg = webserver.arg("PumpIntervalVeg").toInt();
+  PumpIntervalBloom = webserver.arg("PumpIntervalBloom").toInt();
   
   // size is 32 byte
   EEPROM.put(170, GrowName);
@@ -764,6 +788,10 @@ void POSTgrowSettings() {
   EEPROM.put(216, PinFANPWM);
   EEPROM.put(217, SunFade);
   EEPROM.put(218, SunFadeDuration);
+  // size is 1 byte
+  EEPROM.put(241, PumpIntervalVeg);
+  // size is 1 byte
+  EEPROM.put(242, PumpIntervalBloom);
   
   EEPROM.commit();
   
@@ -992,6 +1020,27 @@ void POSTsetOutput() {
 }
   
 
+void POSTsetPumpManual() {
+  PumpOnManual = webserver.arg("PumpOnManual").toInt();
+  webserver.sendHeader("Location", String("/?success"), true);
+  webserver.send(302, "text/plain", "switch: success!\n");
+}
+
+void POSTwipeConfirm() {
+  String body = returnHTMLheader();
+  // TODO only debug and development solution, remove this later
+  String confirm = webserver.arg("confirm");
+  if(confirm == "on") {
+    body += "<div class='warnmsg'><h2>!! Wiping CanGrow's EEPROM !!</h2><br>Device will restart in a few seconds.<br>After restart a new WiFi 'CanGrow-unconfigured' will be created. To access the WebUI visit <a href='http://192.168.4.20'>http://192.168.4.20</a></div>";
+    body += FPSTR(HTMLfooter);
+    webserver.send(200, "text/html", body);
+    wipeEEPROM();
+  } else {
+    webserver.send(400, "text/html", String("Error, 'confirm' missing nor wrong"));
+  }
+
+}
+
 
 /* 
  * API section
@@ -1004,6 +1053,7 @@ void APIgetSensors() {
   JsonDocument jsonSensors;
     
   jsonSensors["soilmoisture"] = valSoilmoisture;
+  jsonSensors["soilmoistureAvg"] = valSoilmoistureAvg;
   jsonSensors["temperature"] = valTemperature;
   jsonSensors["humidity"] = valHumidity;
   jsonSensors["waterlevel"] = valWaterlevel;
@@ -1018,6 +1068,13 @@ void APIgetDebug() {
   
   JsonDocument jsonDebug;
   
+  // Runtime vars
+  JsonObject objRuntime = jsonDebug["runtime"].add<JsonObject>();
+  objRuntime["PumpOnTimePassed"] = PumpOnTimePassed;
+  objRuntime["PumpOnManual"] = PumpOnManual;
+  objRuntime["valSoilmoistureAvg"] = valSoilmoistureAvg;
+  objRuntime["valSoilmoistureAvg_tmp"] = valSoilmoistureAvg_tmp;
+  objRuntime["valSoilmoistureAvg_count"] = valSoilmoistureAvg_count;
   
   // WiFi
   JsonObject objWiFi = jsonDebug["wifi"].add<JsonObject>();
@@ -1040,6 +1097,8 @@ void APIgetDebug() {
   objSystem["TemperatureSensor_Type"] = TemperatureSensor_Type;
   objSystem["NtpOffset"] = NtpOffset;
   objSystem["MaintenanceDuration"] = MaintenanceDuration;
+  objSystem["PumpOnTime"] = PumpOnTime;
+  objSystem["PumpLastOn"] = PumpLastOn;
   
   // Grow
   JsonObject objGrow = jsonDebug["grow"].add<JsonObject>();
@@ -1057,7 +1116,8 @@ void APIgetDebug() {
   objGrow["PinLEDPWM"] = PinLEDPWM;
   objGrow["PinFANPWM"] = PinFANPWM;
   objGrow["DayOfGrow"] = DayOfGrow;
-  
+  objGrow["PumpIntervalVeg"] = PumpIntervalVeg;
+  objGrow["PumpIntervalBloom"] = PumpIntervalBloom;
   
   
   // Sensors
@@ -1126,6 +1186,8 @@ void WebHandler() {
   webserver.on("/system/restart", HTTP_GET, SysRestart);
   // wipe eeprom triggered from WebGui
   webserver.on("/system/wipe", HTTP_GET, SysWipe); 
+  // confirm wiping the device
+  webserver.on("/system/wipeConfirm", HTTP_POST, POSTwipeConfirm); 
   // Maintenance mode
   webserver.on("/system/maintenance", HTTP_GET, SysMaintenance); 
   // system update with binary
@@ -1144,6 +1206,7 @@ void WebHandler() {
   
   // switching MOSFETs
   webserver.on("/switch", HTTP_POST, POSTsetOutput); 
+  webserver.on("/pumpManual", HTTP_POST, POSTsetPumpManual);
   
   // api stuff
   webserver.on("/api/sensors", HTTP_GET, APIgetSensors);

KiCad/CanGrow/CanGrow.kicad_pro

@@ -37,9 +37,9 @@
         "other_text_thickness": 0.15,
         "other_text_upright": false,
         "pads": {
-          "drill": 1.1,
+          "drill": 0.8,
-          "height": 2.1,
+          "height": 1.6,
-          "width": 2.1
+          "width": 1.6
         },
         "silk_line_width": 0.1,
         "silk_text_italic": false,
@@ -79,6 +79,7 @@
         "footprint_type_mismatch": "ignore",
         "hole_clearance": "error",
         "hole_near_hole": "error",
+        "holes_co_located": "warning",
         "invalid_outline": "error",
         "isolated_copper": "warning",
         "item_on_disabled_layer": "error",
@@ -491,6 +492,7 @@
   },
   "schematic": {
     "annotate_start_num": 0,
+    "bom_export_filename": "",
     "bom_fmt_presets": [],
     "bom_fmt_settings": {
       "field_delimiter": ",",
@@ -590,7 +592,7 @@
   "sheets": [
     [
       "42428fce-ab8c-4a80-af19-dee4f0070d36",
-      "Stammblatt"
+      "Root"
     ]
   ],
   "text_variables": {}

KiCad/CanGrow/custom/CanGrow.pretty/CanGrow-SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_0.8mm.kicad_mod

@@ -0,0 +1,152 @@
+(footprint "CanGrow-SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_0.8mm"
+	(version 20240108)
+	(generator "pcbnew")
+	(generator_version "8.0")
+	(layer "F.Cu")
+	(descr "Soldered wire connection, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
+	(tags "connector wire 0.1sqmm")
+	(property "Reference" "VCC3.3"
+		(at 0 -2 0)
+		(layer "F.SilkS")
+		(uuid "3ed91354-25bd-4e84-bfb7-188fd65fc8e9")
+		(effects
+			(font
+				(size 0.8 0.8)
+				(thickness 0.1)
+			)
+		)
+	)
+	(property "Value" "SolderWire"
+		(at 0 2 0)
+		(layer "F.Fab")
+		(uuid "706134de-5a43-4b0f-a24a-fc10492bb447")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Footprint" "Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm"
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "3ad71b9a-27a6-4a0e-bdb9-5be60a26b692")
+		(effects
+			(font
+				(size 1.27 1.27)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Datasheet" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "dddc3c2c-a4fc-463d-90ad-f465505d4a51")
+		(effects
+			(font
+				(size 1.27 1.27)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Description" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "ec7bec08-cf6f-41d0-9924-f484b7198917")
+		(effects
+			(font
+				(size 1.27 1.27)
+				(thickness 0.15)
+			)
+		)
+	)
+	(attr exclude_from_pos_files exclude_from_bom)
+	(fp_line
+		(start -1.3 -1.3)
+		(end -1.3 1.3)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "e690fe82-f99d-4c33-9eaa-df5fd9925bf4")
+	)
+	(fp_line
+		(start -1.3 1.3)
+		(end 1.3 1.3)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "de44eeda-4e8f-4e38-ab31-bc2514ca1c52")
+	)
+	(fp_line
+		(start 1.3 -1.3)
+		(end -1.3 -1.3)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "a58f350b-223a-4a2b-b385-7221f51f4b68")
+	)
+	(fp_line
+		(start 1.3 1.3)
+		(end 1.3 -1.3)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "3fa8882e-d3e5-49d9-8ba4-cec9106635a2")
+	)
+	(fp_circle
+		(center 0 0)
+		(end 0.5 0)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(fill none)
+		(layer "F.Fab")
+		(uuid "fc8bd121-be08-4d5a-8538-8d1003ba0cd8")
+	)
+	(fp_text user "${REFERENCE}"
+		(at 0 0 0)
+		(layer "F.Fab")
+		(uuid "dbe65801-e081-4887-bdbd-f547de25cfc2")
+		(effects
+			(font
+				(size 0.25 0.25)
+				(thickness 0.04)
+			)
+		)
+	)
+	(pad "1" thru_hole roundrect
+		(at 0 0)
+		(size 1.6 1.6)
+		(drill 0.8)
+		(layers "*.Cu" "*.Mask")
+		(remove_unused_layers no)
+		(roundrect_rratio 0.15625)
+		(uuid "84abadc5-3aca-4364-bb7c-4e5aca89770a")
+	)
+	(model "${KICAD8_3DMODEL_DIR}/Connector_Wire.3dshapes/SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm.wrl"
+		(offset
+			(xyz 0 0 0)
+		)
+		(scale
+			(xyz 1 1 1)
+		)
+		(rotate
+			(xyz 0 0 0)
+		)
+	)
+)

KiCad/CanGrow/custom/MP1584EN/MP1584EN_Module.kicad_mod

@@ -7,6 +7,7 @@
 	(property "Reference" "U3"
 		(at 0 7.3152 180)
 		(layer "F.SilkS")
+		(hide yes)
 		(uuid "5401f2b9-08c4-433b-a536-95365a9d5b27")
 		(effects
 			(font
@@ -18,6 +19,7 @@
 	(property "Value" "SRT_Power_3A"
 		(at -0.3556 5.1816 0)
 		(layer "F.Fab")
+		(hide yes)
 		(uuid "3aca6114-af0d-478b-80ab-52d5719c58c0")
 		(effects
 			(font
@@ -35,6 +37,7 @@
 		(effects
 			(font
 				(size 1.27 1.27)
+				(thickness 0.15)
 			)
 		)
 	)
@@ -47,6 +50,7 @@
 		(effects
 			(font
 				(size 1.27 1.27)
+				(thickness 0.15)
 			)
 		)
 	)
@@ -59,287 +63,288 @@
 		(effects
 			(font
 				(size 1.27 1.27)
+				(thickness 0.15)
 			)
 		)
 	)
 	(attr through_hole)
 	(fp_line
-		(start -11.176 -7.493)
+		(start -10.2122 -6.0076)
-		(end -11.176 8.636)
+		(end -10.2122 10.1214)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "c04c845e-4b76-4dc5-b3a1-2129724a526d")
+		(uuid "6292f9f0-b20e-4f1e-990a-0b11f0bae5e2")
 	)
 	(fp_line
-		(start -11.176 8.636)
+		(start -10.2122 10.1214)
-		(end 10.16 8.636)
+		(end 11.1238 10.1214)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "b279bc16-0fa3-40ad-9a71-246db78cd5db")
+		(uuid "7b8db049-a75b-4c09-b1c9-de8a147005c4")
 	)
 	(fp_line
-		(start -7.4168 -1.8796)
+		(start -6.453 -0.3942)
-		(end -1.3208 -1.8796)
+		(end -0.357 -0.3942)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "1cc5b0bc-c494-4f7d-bca7-4c61a9317e88")
+		(uuid "c4ed20b9-5f3d-4741-9180-be3de36b2638")
 	)
 	(fp_line
-		(start -7.4168 2.5908)
+		(start -6.453 4.0762)
-		(end -7.4168 -1.8796)
+		(end -6.453 -0.3942)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "cb93a75e-f00e-4ada-977c-4ebffb53a1ef")
+		(uuid "d7e1ea82-a28a-4e4c-8051-86a68fea340c")
 	)
 	(fp_line
-		(start -6.2992 -5.7658)
+		(start -5.3354 -4.2804)
-		(end -2.8702 -5.7658)
+		(end -1.9064 -4.2804)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "58d4cb4b-5a3f-4493-aa99-0deaf5683749")
+		(uuid "06328989-1b0f-46d7-883b-033109387c94")
 	)
 	(fp_line
-		(start -6.2992 -4.4958)
+		(start -5.3354 -3.0104)
-		(end -6.2992 -5.7658)
+		(end -5.3354 -4.2804)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "23c244a5-fbbf-43b9-8e18-3f2c2f80daac")
+		(uuid "8d77e0eb-1044-47c3-83fb-eeb0a96fae5d")
 	)
 	(fp_line
-		(start -2.8702 -5.7658)
+		(start -1.9064 -4.2804)
-		(end -2.8702 -4.4958)
+		(end -1.9064 -3.0104)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "dc18e288-f18f-43b9-8bf9-a20134e8fe6b")
+		(uuid "aacf448e-591d-467e-9b05-308beed279bf")
 	)
 	(fp_line
-		(start -2.8702 -4.4958)
+		(start -1.9064 -3.0104)
-		(end -6.2992 -4.4958)
+		(end -5.3354 -3.0104)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "0db4cf0f-ac7a-4c9b-ae10-55a36ddbd4e4")
+		(uuid "1a4d146d-43a7-4082-9120-8896a6302895")
 	)
 	(fp_line
-		(start -1.3208 2.5908)
+		(start -0.357 4.0762)
-		(end -7.4168 2.5908)
+		(end -6.453 4.0762)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "bb094c9b-9d8c-4f38-83ed-01fc7944b9a1")
+		(uuid "28f1cc66-eb55-47b0-8a8f-d7e1518711f4")
 	)
 	(fp_line
-		(start -1.3208 2.5908)
+		(start -0.357 4.0762)
-		(end -1.3208 -1.8796)
+		(end -0.357 -0.3942)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "15406a1c-aa60-4574-94bc-bc7b1c93f995")
+		(uuid "6820cfba-dad3-4b8f-888f-85dbe2540377")
 	)
 	(fp_line
-		(start 0.3556 -3.4544)
+		(start 1.3194 -1.969)
-		(end 0.3556 3.2004)
+		(end 1.3194 4.6858)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "7f056460-3325-494e-89b7-e00faf35b853")
+		(uuid "6a862895-3bf4-4887-9dab-db5334a221bc")
 	)
 	(fp_line
-		(start 0.3556 -3.4544)
+		(start 1.3194 -1.969)
-		(end 7.0104 -3.4544)
+		(end 7.9742 -1.969)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "fb81112c-7565-47b2-8682-db2abbd3ddf0")
+		(uuid "79debc5c-9a35-496c-8f29-014030f144a4")
 	)
 	(fp_line
-		(start 1.9304 -0.5969)
+		(start 2.8942 0.8885)
-		(end 4.5593 -0.5969)
+		(end 5.5231 0.8885)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "48533810-e56f-47c8-8bce-ce1c68dc9c75")
+		(uuid "84cd7a4d-d683-4fbc-825f-665c5b0f0758")
 	)
 	(fp_line
-		(start 1.9304 0.0381)
+		(start 2.8942 1.5235)
-		(end 1.9304 -0.5969)
+		(end 2.8942 0.8885)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "03a589e3-a74e-4336-8cad-43118c287e8a")
+		(uuid "4e52b40e-83c8-4d07-95ff-b90fa1783618")
 	)
 	(fp_line
-		(start 1.9304 0.0381)
+		(start 2.8942 1.5235)
-		(end 4.5593 0.0381)
+		(end 5.5231 1.5235)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "ce0e1e31-1518-4423-8678-79c96482e137")
+		(uuid "a399ee1e-f3f5-4636-9f46-aa9b47e0db94")
 	)
 	(fp_line
-		(start 4.5593 -1.2954)
+		(start 5.5231 0.19)
-		(end 5.8293 -0.2794)
+		(end 6.7931 1.206)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "60031373-aa96-4773-880b-c8200b9c8446")
+		(uuid "974ab6af-0377-40af-977c-a13764cf3b42")
 	)
 	(fp_line
-		(start 4.5593 -0.5969)
+		(start 5.5231 0.8885)
-		(end 4.5593 -1.2954)
+		(end 5.5231 0.19)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "e8ee4f92-28ab-4a33-a9f9-a6abaf63c07f")
+		(uuid "a43ae26f-5b7d-4a6a-a076-714c678ef718")
 	)
 	(fp_line
-		(start 4.5593 0.8001)
+		(start 5.5231 2.2855)
-		(end 4.5593 0.0381)
+		(end 5.5231 1.5235)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "08acbb33-d7a2-40ec-b9c7-e1637e3c6b50")
+		(uuid "cc8ed141-1479-47bc-b57c-ac3d7de64f29")
 	)
 	(fp_line
-		(start 5.8293 -0.2794)
+		(start 6.7931 1.206)
-		(end 4.5593 0.8001)
+		(end 5.5231 2.2855)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "93934ce2-e724-43a7-936d-d5b13ecab734")
+		(uuid "59d9abe5-a32f-469b-9fd6-08593b95afde")
 	)
 	(fp_line
-		(start 7.0104 -3.4544)
+		(start 7.9742 -1.969)
-		(end 7.0104 3.2004)
+		(end 7.9742 4.6858)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "67302b70-b929-4d08-9b20-00ad993d7c48")
+		(uuid "73f5a41f-61af-42a7-bacf-c58d7968f53a")
 	)
 	(fp_line
-		(start 7.0104 3.2004)
+		(start 7.9742 4.6858)
-		(end 0.3556 3.2004)
+		(end 1.3194 4.6858)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "0718d059-35cf-4406-ab64-7d7e6d83cf21")
+		(uuid "9ec91a9f-ceda-4f7c-b422-f6a162037a63")
 	)
 	(fp_line
-		(start 10.16 -7.493)
+		(start 11.1238 -6.0076)
-		(end -11.176 -7.493)
+		(end -10.2122 -6.0076)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "3f15543c-c79e-44be-a583-62309e7f62ac")
+		(uuid "ed6fa262-c61a-4bb7-90b5-f3b3ee971658")
 	)
 	(fp_line
-		(start 10.16 8.636)
+		(start 11.1238 10.1214)
-		(end 10.16 -7.493)
+		(end 11.1238 -6.0076)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.SilkS")
-		(uuid "53974b4e-f4fd-4a51-b72c-09e66d707da7")
+		(uuid "0251e69d-8ab4-482d-b741-3238b0fef811")
 	)
 	(fp_circle
-		(center -8.1534 -4.8641)
+		(center -7.1896 -3.3787)
-		(end -7.5819 -4.3561)
+		(end -6.6181 -2.8707)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "c9f36fdc-7af5-40c1-b400-6db31e87c78d")
+		(uuid "55702fe3-b28e-4e80-86d3-f64c403681d1")
 	)
 	(fp_circle
-		(center -8.1026 5.8166)
+		(center -7.1388 7.302)
-		(end -7.5311 6.3246)
+		(end -6.5673 7.81)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "4e0da6f8-ad5e-4cc1-95ba-014ff87aee07")
+		(uuid "0ffe4b1a-c314-4a3c-8456-b73925f03b28")
 	)
 	(fp_circle
-		(center 6.4262 -4.8641)
+		(center 7.39 -3.3787)
-		(end 6.9977 -4.3561)
+		(end 7.9615 -2.8707)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "1cb73701-38be-459b-a7c5-86d645c4cc0e")
+		(uuid "82347fd5-ab01-478d-bf06-2837edd3b9c5")
 	)
 	(fp_circle
-		(center 6.5278 5.7912)
+		(center 7.4916 7.2766)
-		(end 7.0993 6.2992)
+		(end 8.0631 7.7846)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(fill none)
 		(layer "F.SilkS")
-		(uuid "079e6cb8-ca9e-47a7-9f22-9f08bcf4c5ee")
+		(uuid "f74d6220-edbd-4a39-a810-7cf19016933f")
 	)
 	(fp_poly
 		(pts
-			(xy -6.7056 -2.54) (xy -6.2992 -2.54) (xy -6.2992 -1.9304) (xy -6.7056 -1.9304)
+			(xy -5.7418 -1.0546) (xy -5.3354 -1.0546) (xy -5.3354 -0.445) (xy -5.7418 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -347,11 +352,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "9f932498-4dae-4e35-9fff-b4bb98c73816")
+		(uuid "80ff133a-8874-4f0a-8c9e-250633a8855a")
 	)
 	(fp_poly
 		(pts
-			(xy -6.7056 2.6416) (xy -6.2992 2.6416) (xy -6.2992 3.2512) (xy -6.7056 3.2512)
+			(xy -5.7418 4.127) (xy -5.3354 4.127) (xy -5.3354 4.7366) (xy -5.7418 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -359,11 +364,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "372c02f5-61f4-4301-aca3-d818a674272e")
+		(uuid "6e08c3a4-3092-400f-9a55-4e8081226741")
 	)
 	(fp_poly
 		(pts
-			(xy -5.2324 -2.54) (xy -4.826 -2.54) (xy -4.826 -1.9304) (xy -5.2324 -1.9304)
+			(xy -4.2686 -1.0546) (xy -3.8622 -1.0546) (xy -3.8622 -0.445) (xy -4.2686 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -371,11 +376,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "8b8d18d4-2701-4c72-966d-f580819a5bea")
+		(uuid "6a96c3fa-8827-498f-9c6c-ffb212b62a93")
 	)
 	(fp_poly
 		(pts
-			(xy -5.2324 2.6416) (xy -4.826 2.6416) (xy -4.826 3.2512) (xy -5.2324 3.2512)
+			(xy -4.2686 4.127) (xy -3.8622 4.127) (xy -3.8622 4.7366) (xy -4.2686 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -383,11 +388,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "d6255dee-580f-4b85-9e3c-df858fc7bc8d")
+		(uuid "0886a33b-f340-44bf-9de5-f44938efcb54")
 	)
 	(fp_poly
 		(pts
-			(xy -3.7592 -2.54) (xy -3.3528 -2.54) (xy -3.3528 -1.9304) (xy -3.7592 -1.9304)
+			(xy -2.7954 -1.0546) (xy -2.389 -1.0546) (xy -2.389 -0.445) (xy -2.7954 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -395,11 +400,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "ebef6c64-7266-47b4-9a64-d9d611adc26d")
+		(uuid "51e3d89a-8455-4f58-ad05-c15d024e9c54")
 	)
 	(fp_poly
 		(pts
-			(xy -3.7592 2.6416) (xy -3.3528 2.6416) (xy -3.3528 3.2512) (xy -3.7592 3.2512)
+			(xy -2.7954 4.127) (xy -2.389 4.127) (xy -2.389 4.7366) (xy -2.7954 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -407,11 +412,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "59be5a8f-ac87-4541-97df-321cb1234c4f")
+		(uuid "5514ba93-c636-4e40-855a-d8123eaad1aa")
 	)
 	(fp_poly
 		(pts
-			(xy -2.2352 -2.54) (xy -1.8288 -2.54) (xy -1.8288 -1.9304) (xy -2.2352 -1.9304)
+			(xy -1.2714 -1.0546) (xy -0.865 -1.0546) (xy -0.865 -0.445) (xy -1.2714 -0.445)
 		)
 		(stroke
 			(width 0.1)
@@ -419,11 +424,11 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "b1663dd5-c63f-4034-b29b-537f9a6abd47")
+		(uuid "d6b9bc27-cda7-4d8b-ad26-7b36a48ecfbd")
 	)
 	(fp_poly
 		(pts
-			(xy -2.2352 2.6416) (xy -1.8288 2.6416) (xy -1.8288 3.2512) (xy -2.2352 3.2512)
+			(xy -1.2714 4.127) (xy -0.865 4.127) (xy -0.865 4.7366) (xy -1.2714 4.7366)
 		)
 		(stroke
 			(width 0.1)
@@ -431,52 +436,52 @@
 		)
 		(fill solid)
 		(layer "F.SilkS")
-		(uuid "6e5990fc-9a52-480e-b640-cabfc2a6cd18")
+		(uuid "3fef23e2-4bcd-4924-97f4-7575ce7994b1")
 	)
 	(fp_line
-		(start -11.3538 -7.6454)
+		(start -10.39 -6.16)
-		(end -11.3538 8.8138)
+		(end -10.39 10.2992)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "e21c3eb0-fdf3-4a2d-9d84-f366a7426b90")
+		(uuid "bc1192d1-b770-4e65-bd6d-2beed31fb275")
 	)
 	(fp_line
-		(start -11.3538 -7.6454)
+		(start -10.39 -6.16)
-		(end 10.3378 -7.6708)
+		(end 11.3016 -6.1854)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "f2231139-582f-43f7-a92f-646e424ad044")
+		(uuid "ac2ec45c-be62-4db0-88df-ef12d1f24714")
 	)
 	(fp_line
-		(start -11.3538 8.8138)
+		(start -10.39 10.2992)
-		(end 10.3378 8.8138)
+		(end 11.3016 10.2992)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "ff2d64a2-f244-4e27-a61c-b0184f18f038")
+		(uuid "90a38e33-4119-4758-ac3b-323f8c73139c")
 	)
 	(fp_line
-		(start 10.3378 -7.6708)
+		(start 11.3016 -6.1854)
-		(end 10.3378 8.8138)
+		(end 11.3016 10.2992)
 		(stroke
 			(width 0.12)
 			(type solid)
 		)
 		(layer "F.Fab")
-		(uuid "e571d0ae-d587-45ad-9b62-7a686b2f0c60")
+		(uuid "22193204-ae0b-4462-95d6-f226e27ae968")
 	)
 	(fp_text user "-"
-		(at 6.4262 -4.9276 0)
+		(at 7.39 -3.4422 0)
 		(layer "F.SilkS")
-		(uuid "4f88e670-b848-4271-a5f8-bd548b64cadd")
+		(uuid "0bec24d9-5468-4c4b-96d3-ef96e25202cf")
 		(effects
 			(font
 				(size 1 1)
@@ -485,9 +490,9 @@
 		)
 	)
 	(fp_text user "-"
-		(at -8.1534 -4.9276 0)
+		(at -7.1896 -3.4422 0)
 		(layer "F.SilkS")
-		(uuid "86dab817-ad16-4cdc-b19d-607ba0d990ab")
+		(uuid "0c9a77a8-8422-401b-a5a1-b40da4e203c0")
 		(effects
 			(font
 				(size 1 1)
@@ -496,9 +501,9 @@
 		)
 	)
 	(fp_text user "VOUT"
-		(at 8.8138 0.0508 -90)
+		(at 9.7776 1.5362 -90)
 		(layer "F.SilkS")
-		(uuid "876b8e16-62cc-4ae3-9c78-14a6cc337309")
+		(uuid "3c0d7914-45a5-4bbb-8f5b-40ede46c7d70")
 		(effects
 			(font
 				(size 1 1)
@@ -507,9 +512,9 @@
 		)
 	)
 	(fp_text user "+"
-		(at 6.5278 5.7277 0)
+		(at -7.1388 7.2385 0)
 		(layer "F.SilkS")
-		(uuid "935ff27f-9949-446d-a438-f14c3624acfc")
+		(uuid "4145e214-17c8-4e57-9147-ea318329ca66")
 		(effects
 			(font
 				(size 1 1)
@@ -518,9 +523,9 @@
 		)
 	)
 	(fp_text user "4.5-28V"
-		(at -9.7536 0.3048 -90)
+		(at -8.7898 1.7902 -90)
 		(layer "F.SilkS")
-		(uuid "d89e1384-2d5d-4d2d-bcf8-24657a3939a7")
+		(uuid "9e9858d1-9320-4297-aaee-1e9bd601ead9")
 		(effects
 			(font
 				(size 1 1)
@@ -529,9 +534,9 @@
 		)
 	)
 	(fp_text user "+"
-		(at -8.1026 5.7531 0)
+		(at 7.4916 7.2131 0)
 		(layer "F.SilkS")
-		(uuid "e3820af4-2c8f-4e79-b4d3-6c49dcea8bb5")
+		(uuid "c1d9d6ad-e0e9-47c6-989c-71feb1923647")
 		(effects
 			(font
 				(size 1 1)
@@ -540,68 +545,68 @@
 		)
 	)
 	(pad "1" thru_hole rect
-		(at -10.16 4.572 90)
+		(at -9.1962 6.1704 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "6550b245-c3c7-4898-8573-6476b3094631")
+		(uuid "7be89935-c19e-4baa-904a-69452ec23d23")
 	)
 	(pad "1" thru_hole rect
-		(at -10.16 7.112 90)
+		(at -9.1962 8.7104 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "2c55b3c8-f1e1-407a-8b02-310137232038")
+		(uuid "8f4284a4-3768-4b1e-9962-d551ccf57e63")
 	)
 	(pad "2" thru_hole oval
-		(at -10.1854 -3.683 90)
+		(at -9.2216 -2.1976 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "6f8804ba-99ab-459b-84ff-3c356b03222a")
+		(uuid "1f87148a-c7c2-483f-b799-2ff5e01ff488")
 	)
 	(pad "2" thru_hole oval
-		(at -10.16 -6.223 90)
+		(at -9.1962 -4.7376 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "b8ed6aef-b96f-4eb3-a1a2-2deefde02bbb")
+		(uuid "bf2458a2-a107-48c3-bb88-9e881f49434c")
 	)
 	(pad "3" thru_hole rect
-		(at 8.636 4.699 90)
+		(at 9.5998 6.1844 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "5892046d-9427-451a-9d67-551089438a5d")
+		(uuid "69cb71b1-224d-4fe7-8b14-ee9b1da593fb")
 	)
 	(pad "3" thru_hole rect
-		(at 8.636 7.239 90)
+		(at 9.5998 8.7244 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "519792c2-361a-4982-84bb-b0360a514c29")
+		(uuid "39b44515-755a-4a18-9e94-5d0b3431f548")
 	)
 	(pad "4" thru_hole oval
-		(at 8.7376 -3.683 90)
+		(at 9.7014 -2.1976 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "efe9e9b1-891f-4b33-a064-306161845044")
+		(uuid "6af0a541-44c2-41dc-9c4e-37db310350d6")
 	)
 	(pad "4" thru_hole oval
-		(at 8.763 -6.223 90)
+		(at 9.7268 -4.7376 90)
 		(size 1.6 1.6)
 		(drill 0.8)
 		(layers "*.Cu" "*.Mask")
 		(remove_unused_layers no)
-		(uuid "16f7d0b3-7073-4c65-a466-c8a09376cdd7")
+		(uuid "204e6602-d630-4983-8e4d-fb59a5c65572")
 	)
 	(model "${KISYS3DMOD}/Module.3dshapes/Arduino_UNO_R2.wrl"
 		(offset

KiCad/CanGrow/gerber/CanGrow-B_Mask.gbs

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.3*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
-G04 #@! TF.CreationDate,2024-06-05T14:32:50+02:00*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.3) date 2024-06-05 14:32:50*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -31,321 +31,358 @@ G04 Aperture macros list*
 G04 Aperture macros list end*
 %ADD10R,1.600000X1.600000*%
 %ADD11C,1.600000*%
-%ADD12O,1.600000X1.600000*%
+%ADD12R,1.800000X1.100000*%
-%ADD13R,2.000000X1.905000*%
+%ADD13RoundRect,0.275000X-0.625000X0.275000X-0.625000X-0.275000X0.625000X-0.275000X0.625000X0.275000X0*%
-%ADD14O,2.000000X1.905000*%
+%ADD14O,1.600000X1.600000*%
-%ADD15RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
+%ADD15R,2.000000X1.905000*%
-%ADD16R,1.800000X1.800000*%
+%ADD16O,2.000000X1.905000*%
-%ADD17C,1.800000*%
+%ADD17R,1.800000X1.800000*%
-%ADD18RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
+%ADD18C,1.800000*%
-%ADD19C,6.000000*%
+%ADD19RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
-%ADD20C,5.600000*%
+%ADD20C,6.000000*%
-%ADD21O,1.800000X1.800000*%
+%ADD21C,5.600000*%
-%ADD22O,3.800000X8.000000*%
+%ADD22O,1.800000X1.800000*%
-%ADD23R,1.700000X1.700000*%
+%ADD23O,3.800000X8.000000*%
-%ADD24O,1.700000X1.700000*%
+%ADD24R,1.700000X1.700000*%
-%ADD25R,2.000000X2.000000*%
+%ADD25O,1.700000X1.700000*%
-%ADD26O,2.000000X1.600000*%
+%ADD26R,2.000000X2.000000*%
-%ADD27C,1.100000*%
+%ADD27O,2.000000X1.600000*%
-%ADD28R,1.730000X2.030000*%
+%ADD28RoundRect,0.250000X-0.550000X-0.550000X0.550000X-0.550000X0.550000X0.550000X-0.550000X0.550000X0*%
-%ADD29O,1.730000X2.030000*%
+%ADD29RoundRect,0.275000X0.625000X-0.275000X0.625000X0.275000X-0.625000X0.275000X-0.625000X-0.275000X0*%
-%ADD30RoundRect,0.250001X0.799999X0.799999X-0.799999X0.799999X-0.799999X-0.799999X0.799999X-0.799999X0*%
+%ADD30C,1.100000*%
+%ADD31R,1.730000X2.030000*%
+%ADD32O,1.730000X2.030000*%
+%ADD33RoundRect,0.250000X0.550000X0.550000X-0.550000X0.550000X-0.550000X-0.550000X0.550000X-0.550000X0*%
 G04 APERTURE END LIST*
 D10*
-X101500000Y-90100000D03*
+X156600000Y-108750000D03*
 D11*
-X104000000Y-90100000D03*
+X156600000Y-111250000D03*
-X103955112Y-94200000D03*
-X101455112Y-94200000D03*
-D10*
-X153500000Y-111250000D03*
-D11*
-X153500000Y-108750000D03*
-X123520000Y-88850000D03*
 D12*
-X133680000Y-88850000D03*
+X127400000Y-42690000D03*
+D13*
+X129470000Y-43960000D03*
+X127400000Y-45230000D03*
 D11*
 X117000000Y-42420000D03*
-D12*
-X106840000Y-42420000D03*
-D13*
-X138430000Y-83750000D03*
 D14*
+X106840000Y-42420000D03*
+D15*
+X138430000Y-83750000D03*
+D16*
 X138430000Y-81210000D03*
 X138430000Y-78670000D03*
-D13*
+D15*
 X129800000Y-35150000D03*
-D14*
+D16*
 X129800000Y-32610000D03*
 X129800000Y-30070000D03*
 D11*
+X139900000Y-53320000D03*
+D14*
+X139900000Y-63480000D03*
+D10*
+X130748000Y-108846000D03*
+X130748000Y-111386000D03*
+D14*
+X130722600Y-100478000D03*
+X130748000Y-97938000D03*
+D10*
+X149544000Y-108860000D03*
+X149544000Y-111400000D03*
+D14*
+X149645600Y-100478000D03*
+X149671000Y-97938000D03*
+D11*
 X177750000Y-92250000D03*
-D12*
+D14*
 X187910000Y-92250000D03*
-D15*
+D17*
-X153750000Y-68000000D03*
-D11*
-X106750000Y-72750000D03*
-D12*
-X116910000Y-72750000D03*
-D11*
-X142680000Y-60340000D03*
-D12*
-X142680000Y-70500000D03*
-D16*
 X122231000Y-81220000D03*
-D17*
-X122231000Y-83760000D03*
 D18*
-X113930000Y-59700000D03*
+X122231000Y-83760000D03*
 D19*
+X113930000Y-59700000D03*
+D20*
 X106730000Y-59700000D03*
-D16*
-X122250000Y-102750000D03*
 D17*
+X122250000Y-102750000D03*
+D18*
 X122250000Y-105290000D03*
 D11*
 X195500000Y-29200000D03*
-D12*
+D14*
 X185340000Y-29200000D03*
-D20*
-X87000000Y-26500000D03*
-D11*
-X116910000Y-69500000D03*
 D12*
-X106750000Y-69500000D03*
+X127430000Y-91400000D03*
-D16*
+D13*
-X106770000Y-87720000D03*
+X129500000Y-92670000D03*
+X127430000Y-93940000D03*
 D21*
+X87000000Y-22750000D03*
+D11*
+X116855000Y-69500000D03*
+D14*
+X106695000Y-69500000D03*
+D17*
+X106770000Y-87720000D03*
+D22*
 X116930000Y-87720000D03*
 D11*
+X133000000Y-94000000D03*
+D14*
+X133000000Y-83840000D03*
+D11*
 X195500000Y-52900000D03*
-D12*
+D14*
 X185340000Y-52900000D03*
 D11*
 X198180000Y-71050000D03*
-D12*
+D14*
 X188020000Y-71050000D03*
-D20*
+D21*
-X203000000Y-26500000D03*
+X203000000Y-22750000D03*
+D11*
+X139920000Y-66500000D03*
+D14*
+X150080000Y-66500000D03*
 D11*
 X116910000Y-100250000D03*
-D12*
+D14*
 X106750000Y-100250000D03*
-D22*
+D11*
+X153100000Y-78010000D03*
+D14*
+X153100000Y-67850000D03*
+D12*
+X121500000Y-69860000D03*
+D13*
+X123570000Y-71130000D03*
+X121500000Y-72400000D03*
+D12*
+X127400000Y-69860000D03*
+D13*
+X129470000Y-71130000D03*
+X127400000Y-72400000D03*
+D23*
 X96500000Y-97650000D03*
 X96500000Y-106950000D03*
-D23*
+D24*
 X195485000Y-60100000D03*
-D24*
-X192945000Y-60100000D03*
-D18*
-X113930000Y-81220000D03*
-D19*
-X106730000Y-81220000D03*
 D25*
-X150100000Y-31750000D03*
+X192945000Y-60100000D03*
+D19*
+X113930000Y-81220000D03*
+D20*
+X106730000Y-81220000D03*
 D26*
-X150100000Y-34290000D03*
+X150100000Y-27460000D03*
-X150100000Y-36830000D03*
+D27*
-X150100000Y-39370000D03*
+X150100000Y-30000000D03*
-X150100000Y-41910000D03*
+X150100000Y-32540000D03*
-X150100000Y-44450000D03*
+X150100000Y-35080000D03*
-X150100000Y-46990000D03*
+X150100000Y-37620000D03*
-X150100000Y-49530000D03*
+X150100000Y-40160000D03*
-X172960000Y-49530000D03*
+X150100000Y-42700000D03*
-X172960000Y-46990000D03*
+X150100000Y-45240000D03*
-X172960000Y-44450000D03*
+X172960000Y-45240000D03*
-X172960000Y-41910000D03*
+X172960000Y-42700000D03*
-X172960000Y-39370000D03*
+X172960000Y-40160000D03*
-X172960000Y-36830000D03*
+X172960000Y-37620000D03*
-X172960000Y-34290000D03*
+X172960000Y-35080000D03*
-X172960000Y-31750000D03*
+X172960000Y-32540000D03*
-D23*
+X172960000Y-30000000D03*
-X195955000Y-77050000D03*
+X172960000Y-27460000D03*
+D24*
+X195400000Y-77000000D03*
+D25*
+X192860000Y-77000000D03*
+X190320000Y-77000000D03*
 D24*
-X193415000Y-77050000D03*
-X190875000Y-77050000D03*
-D23*
 X195485000Y-38630000D03*
-D24*
+D25*
 X192945000Y-38630000D03*
 X190405000Y-38630000D03*
 X187865000Y-38630000D03*
-D15*
+D28*
-X136750000Y-52500000D03*
+X131800000Y-50800000D03*
-D16*
-X174830000Y-82250000D03*
-D21*
-X174830000Y-92410000D03*
-D16*
-X122300000Y-32620000D03*
 D17*
+X174830000Y-82250000D03*
+D22*
+X174830000Y-92410000D03*
+D17*
+X122300000Y-32620000D03*
+D18*
 X122300000Y-35160000D03*
-D23*
-X172420000Y-99250000D03*
 D24*
-X174960000Y-99250000D03*
+X195600000Y-99250000D03*
-X177500000Y-99250000D03*
+D25*
-D10*
+X193060000Y-99250000D03*
-X138730000Y-70025000D03*
+X190520000Y-99250000D03*
-D12*
+D11*
-X138730000Y-67485000D03*
+X101455112Y-94200000D03*
-X131110000Y-67485000D03*
+X103955112Y-94200000D03*
-X131110000Y-70025000D03*
+D24*
-D23*
 X195490000Y-47890000D03*
-D24*
+D25*
 X192950000Y-47890000D03*
 X190410000Y-47890000D03*
 X187870000Y-47890000D03*
-D23*
+D11*
-X195485000Y-33980000D03*
+X133000000Y-45310000D03*
+D14*
+X133000000Y-35150000D03*
+D12*
+X138400000Y-45170000D03*
+D29*
+X136330000Y-43900000D03*
+X138400000Y-42630000D03*
 D24*
+X195485000Y-33980000D03*
+D25*
 X192945000Y-33980000D03*
 X190405000Y-33980000D03*
 X187865000Y-33980000D03*
-D11*
+D28*
-X142750000Y-33000000D03*
+X156500000Y-67860000D03*
-D12*
+D23*
-X142750000Y-43160000D03*
-D15*
-X157500000Y-68000000D03*
-D10*
-X138800000Y-42685000D03*
-D12*
-X138800000Y-40145000D03*
-X131180000Y-40145000D03*
-X131180000Y-42685000D03*
-D22*
 X96500000Y-42450000D03*
 X96500000Y-33150000D03*
 X96500000Y-64000000D03*
 X96500000Y-54700000D03*
-D13*
+D15*
 X129680000Y-62250000D03*
-D14*
+D16*
 X129680000Y-59710000D03*
 X129680000Y-57170000D03*
-D10*
+D28*
-X143630000Y-91470000D03*
+X188000000Y-67900000D03*
-D12*
-X143630000Y-88930000D03*
-X136010000Y-88930000D03*
-X136010000Y-91470000D03*
-D15*
-X193000000Y-65000000D03*
 D11*
 X187670000Y-88250000D03*
-D12*
-X197830000Y-88250000D03*
-D10*
-X119794888Y-54750000D03*
-D11*
-X122294888Y-54750000D03*
-D13*
-X129680000Y-83750000D03*
 D14*
+X197830000Y-88250000D03*
+D11*
+X102500000Y-66200000D03*
+X102500000Y-68700000D03*
+X116900000Y-95000000D03*
+D14*
+X106740000Y-95000000D03*
+D10*
+X101500000Y-90100000D03*
+D11*
+X104000000Y-90100000D03*
+X133000000Y-72460000D03*
+D14*
+X133000000Y-62300000D03*
+D15*
+X129680000Y-83750000D03*
+D16*
 X129680000Y-81210000D03*
 X129680000Y-78670000D03*
-D10*
-X128204000Y-108710000D03*
-X128204000Y-111250000D03*
 D12*
-X128178600Y-100455000D03*
+X138370000Y-72370000D03*
-X128204000Y-97915000D03*
-D10*
-X147000000Y-108837000D03*
-X147000000Y-111377000D03*
-D12*
-X147101600Y-100455000D03*
-X147127000Y-97915000D03*
-D16*
-X106760000Y-66240000D03*
-D21*
-X116920000Y-66240000D03*
-D20*
-X87000000Y-113500000D03*
-D27*
-X108910000Y-48540000D03*
-D28*
-X103830000Y-50700000D03*
 D29*
-X106370000Y-50700000D03*
+X136300000Y-71100000D03*
-X108910000Y-50700000D03*
+X138370000Y-69830000D03*
-X111450000Y-50700000D03*
+D17*
+X106760000Y-66240000D03*
+D22*
+X116920000Y-66240000D03*
+D21*
+X87000000Y-117250000D03*
+D11*
+X146480000Y-32600000D03*
+D14*
+X136320000Y-32600000D03*
+D30*
+X108900000Y-48620000D03*
+D31*
+X103820000Y-50780000D03*
+D32*
+X106360000Y-50780000D03*
+X108900000Y-50780000D03*
+X111440000Y-50780000D03*
 D11*
 X181830000Y-85750000D03*
 X181830000Y-88250000D03*
 D10*
-X122250000Y-111250000D03*
+X123600000Y-108750000D03*
 D11*
-X122250000Y-108750000D03*
+X123600000Y-111250000D03*
-D16*
+D17*
 X106870000Y-39160000D03*
-D21*
+D22*
 X117030000Y-39160000D03*
-D23*
+D11*
-X195485000Y-43250000D03*
+X136325000Y-39600000D03*
+D14*
+X146485000Y-39600000D03*
+D11*
+X117000000Y-46000000D03*
+D14*
+X106840000Y-46000000D03*
 D24*
+X195485000Y-43250000D03*
+D25*
 X192945000Y-43250000D03*
 X190405000Y-43250000D03*
 X187865000Y-43250000D03*
-D18*
+D11*
-X113990000Y-108095000D03*
+X116860000Y-73500000D03*
+D14*
+X106700000Y-73500000D03*
 D19*
+X113990000Y-108095000D03*
+D20*
 X106790000Y-108095000D03*
 D11*
 X116930000Y-90980000D03*
-D12*
+D14*
 X106770000Y-90980000D03*
-D16*
+D17*
 X170830000Y-82250000D03*
-D21*
-X170830000Y-92410000D03*
 D22*
+X170830000Y-92410000D03*
+D23*
 X96500000Y-85450000D03*
 X96500000Y-76150000D03*
-D11*
-X123000000Y-48570000D03*
 D12*
-X123000000Y-38410000D03*
+X121500000Y-42690000D03*
-D18*
+D13*
-X114000000Y-32610000D03*
+X123570000Y-43960000D03*
+X121500000Y-45230000D03*
+D12*
+X138400000Y-93900000D03*
+D29*
+X136330000Y-92630000D03*
+X138400000Y-91360000D03*
+D12*
+X121490000Y-91400000D03*
+D13*
+X123560000Y-92670000D03*
+X121490000Y-93940000D03*
 D19*
-X106800000Y-32610000D03*
+X114000000Y-32610000D03*
-D11*
-X106840000Y-45670000D03*
-D12*
-X117000000Y-45670000D03*
-D11*
-X106770000Y-94230000D03*
-D12*
-X116930000Y-94230000D03*
 D20*
-X203000000Y-113500000D03*
+X106800000Y-32610000D03*
-D23*
+D21*
-X177250000Y-47250000D03*
+X203000000Y-117250000D03*
 D24*
-X177250000Y-44710000D03*
+X177250000Y-42790000D03*
+D25*
+X177250000Y-40250000D03*
 D11*
-X122930000Y-75660000D03*
+X144200000Y-74300000D03*
-D12*
+D14*
-X122930000Y-65500000D03*
+X144200000Y-84460000D03*
-D11*
-X147430000Y-81890000D03*
-D12*
-X147430000Y-92050000D03*
-D15*
-X158500000Y-111250000D03*
-D16*
-X122230000Y-59710000D03*
 D17*
+X122230000Y-59710000D03*
+D18*
 X122230000Y-62250000D03*
 D11*
 X197830000Y-84250000D03*
-D12*
+D14*
 X187670000Y-84250000D03*
-D30*
+D33*
-X169750000Y-52500000D03*
+X169750000Y-50800000D03*
 M02*

KiCad/CanGrow/gerber/CanGrow-B_Paste.gbp

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.3*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
-G04 #@! TF.CreationDate,2024-06-05T14:32:50+02:00*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.3) date 2024-06-05 14:32:50*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-B_Silkscreen.gbo

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.3*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
-G04 #@! TF.CreationDate,2024-06-05T14:32:50+02:00*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.3) date 2024-06-05 14:32:50*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -33,403 +33,440 @@ G04 Aperture macros list end*
 %ADD11C,0.300000*%
 %ADD12R,1.600000X1.600000*%
 %ADD13C,1.600000*%
-%ADD14O,1.600000X1.600000*%
+%ADD14R,1.800000X1.100000*%
-%ADD15R,2.000000X1.905000*%
+%ADD15RoundRect,0.275000X-0.625000X0.275000X-0.625000X-0.275000X0.625000X-0.275000X0.625000X0.275000X0*%
-%ADD16O,2.000000X1.905000*%
+%ADD16O,1.600000X1.600000*%
-%ADD17RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
+%ADD17R,2.000000X1.905000*%
-%ADD18R,1.800000X1.800000*%
+%ADD18O,2.000000X1.905000*%
-%ADD19C,1.800000*%
+%ADD19R,1.800000X1.800000*%
-%ADD20RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
+%ADD20C,1.800000*%
-%ADD21C,6.000000*%
+%ADD21RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
-%ADD22C,5.600000*%
+%ADD22C,6.000000*%
-%ADD23O,1.800000X1.800000*%
+%ADD23C,5.600000*%
-%ADD24O,3.800000X8.000000*%
+%ADD24O,1.800000X1.800000*%
-%ADD25R,1.700000X1.700000*%
+%ADD25O,3.800000X8.000000*%
-%ADD26O,1.700000X1.700000*%
+%ADD26R,1.700000X1.700000*%
-%ADD27R,2.000000X2.000000*%
+%ADD27O,1.700000X1.700000*%
-%ADD28O,2.000000X1.600000*%
+%ADD28R,2.000000X2.000000*%
-%ADD29C,1.100000*%
+%ADD29O,2.000000X1.600000*%
-%ADD30R,1.730000X2.030000*%
+%ADD30RoundRect,0.250000X-0.550000X-0.550000X0.550000X-0.550000X0.550000X0.550000X-0.550000X0.550000X0*%
-%ADD31O,1.730000X2.030000*%
+%ADD31RoundRect,0.275000X0.625000X-0.275000X0.625000X0.275000X-0.625000X0.275000X-0.625000X-0.275000X0*%
-%ADD32RoundRect,0.250001X0.799999X0.799999X-0.799999X0.799999X-0.799999X-0.799999X0.799999X-0.799999X0*%
+%ADD32C,1.100000*%
+%ADD33R,1.730000X2.030000*%
+%ADD34O,1.730000X2.030000*%
+%ADD35RoundRect,0.250000X0.550000X0.550000X-0.550000X0.550000X-0.550000X-0.550000X0.550000X-0.550000X0*%
 G04 APERTURE END LIST*
 D10*
-X161600000Y-68950000D02*
+X161150000Y-68950000D02*
-X162000000Y-69750000D01*
+X161550000Y-69750000D01*
-X152750000Y-65000000D02*
+X152300000Y-65000000D02*
-X153750000Y-66000000D01*
+X153300000Y-66000000D01*
-X148250000Y-62500000D01*
+X147800000Y-62500000D01*
-X152750000Y-65000000D01*
+X152300000Y-65000000D01*
 G36*
-X152750000Y-65000000D02*
+X152300000Y-65000000D02*
 G01*
-X153750000Y-66000000D01*
+X153300000Y-66000000D01*
-X148250000Y-62500000D01*
+X147800000Y-62500000D01*
-X152750000Y-65000000D01*
+X152300000Y-65000000D01*
 G37*
-X162090000Y-68925000D02*
+X161640000Y-68925000D02*
-X162290000Y-69325000D01*
+X161840000Y-69325000D01*
-X156250000Y-64500000D02*
+X155800000Y-64500000D02*
-X155250000Y-66000000D01*
+X154800000Y-66000000D01*
-X157250000Y-60500000D01*
+X156800000Y-60500000D01*
-X156250000Y-64500000D01*
+X155800000Y-64500000D01*
 G36*
-X156250000Y-64500000D02*
+X155800000Y-64500000D02*
 G01*
-X155250000Y-66000000D01*
+X154800000Y-66000000D01*
-X157250000Y-60500000D01*
+X156800000Y-60500000D01*
-X156250000Y-64500000D01*
+X155800000Y-64500000D01*
 G37*
-X157250000Y-65000000D02*
+X156800000Y-65000000D02*
-X156250000Y-66000000D01*
+X155800000Y-66000000D01*
-X158250000Y-62000000D01*
+X157800000Y-62000000D01*
-X157250000Y-65000000D01*
+X156800000Y-65000000D01*
 G36*
-X157250000Y-65000000D02*
+X156800000Y-65000000D02*
 G01*
-X156250000Y-66000000D01*
+X155800000Y-66000000D01*
-X158250000Y-62000000D01*
+X157800000Y-62000000D01*
-X157250000Y-65000000D01*
+X156800000Y-65000000D01*
 G37*
-X161800000Y-68850000D02*
+X161350000Y-68850000D02*
-X162200000Y-69650000D01*
+X161750000Y-69650000D01*
-X161750000Y-70000000D02*
+X161300000Y-70000000D02*
-X156250000Y-71500000D01*
+X155800000Y-71500000D01*
-X161250000Y-69000000D01*
+X160800000Y-69000000D01*
-X161750000Y-70000000D01*
+X161300000Y-70000000D01*
 G36*
-X161750000Y-70000000D02*
+X161300000Y-70000000D02*
 G01*
-X156250000Y-71500000D01*
+X155800000Y-71500000D01*
-X161250000Y-69000000D01*
+X160800000Y-69000000D01*
-X161750000Y-70000000D01*
+X161300000Y-70000000D01*
 G37*
-X154750000Y-63500000D02*
+X154300000Y-63500000D02*
-X154750000Y-66000000D01*
+X154300000Y-66000000D01*
-X153250000Y-59000000D01*
+X152800000Y-59000000D01*
-X154750000Y-63500000D01*
+X154300000Y-63500000D01*
 G36*
-X154750000Y-63500000D02*
+X154300000Y-63500000D02*
 G01*
-X154750000Y-66000000D01*
+X154300000Y-66000000D01*
-X153250000Y-59000000D01*
+X152800000Y-59000000D01*
-X154750000Y-63500000D01*
+X154300000Y-63500000D01*
 G37*
-X152750000Y-63500000D02*
+X152300000Y-63500000D02*
-X154250000Y-66000000D01*
+X153800000Y-66000000D01*
-X149250000Y-60500000D01*
+X148800000Y-60500000D01*
-X152750000Y-63500000D01*
+X152300000Y-63500000D01*
 G36*
-X152750000Y-63500000D02*
+X152300000Y-63500000D02*
 G01*
-X154250000Y-66000000D01*
+X153800000Y-66000000D01*
-X149250000Y-60500000D01*
+X148800000Y-60500000D01*
-X152750000Y-63500000D01*
+X152300000Y-63500000D01*
 G37*
 D11*
-X156750000Y-72000000D02*
+X156300000Y-72000000D02*
-X155250000Y-73000000D01*
+X154800000Y-73000000D01*
-X153250000Y-72000000D01*
+X152800000Y-72000000D01*
-X152750000Y-70000000D01*
+X152300000Y-70000000D01*
-X157250000Y-70000000D01*
+X156800000Y-70000000D01*
-X156750000Y-72000000D01*
+X156300000Y-72000000D01*
 %LPC*%
 D12*
-X101500000Y-90100000D03*
+X156600000Y-108750000D03*
 D13*
-X104000000Y-90100000D03*
+X156600000Y-111250000D03*
-X103955112Y-94200000D03*
-X101455112Y-94200000D03*
-D12*
-X153500000Y-111250000D03*
-D13*
-X153500000Y-108750000D03*
-X123520000Y-88850000D03*
 D14*
-X133680000Y-88850000D03*
+X127400000Y-42690000D03*
+D15*
+X129470000Y-43960000D03*
+X127400000Y-45230000D03*
 D13*
 X117000000Y-42420000D03*
-D14*
-X106840000Y-42420000D03*
-D15*
-X138430000Y-83750000D03*
 D16*
+X106840000Y-42420000D03*
+D17*
+X138430000Y-83750000D03*
+D18*
 X138430000Y-81210000D03*
 X138430000Y-78670000D03*
-D15*
+D17*
 X129800000Y-35150000D03*
-D16*
+D18*
 X129800000Y-32610000D03*
 X129800000Y-30070000D03*
 D13*
+X139900000Y-53320000D03*
+D16*
+X139900000Y-63480000D03*
+D12*
+X130748000Y-108846000D03*
+X130748000Y-111386000D03*
+D16*
+X130722600Y-100478000D03*
+X130748000Y-97938000D03*
+D12*
+X149544000Y-108860000D03*
+X149544000Y-111400000D03*
+D16*
+X149645600Y-100478000D03*
+X149671000Y-97938000D03*
+D13*
 X177750000Y-92250000D03*
-D14*
+D16*
 X187910000Y-92250000D03*
-D17*
+D19*
-X153750000Y-68000000D03*
-D13*
-X106750000Y-72750000D03*
-D14*
-X116910000Y-72750000D03*
-D13*
-X142680000Y-60340000D03*
-D14*
-X142680000Y-70500000D03*
-D18*
 X122231000Y-81220000D03*
-D19*
-X122231000Y-83760000D03*
 D20*
-X113930000Y-59700000D03*
+X122231000Y-83760000D03*
 D21*
+X113930000Y-59700000D03*
+D22*
 X106730000Y-59700000D03*
-D18*
-X122250000Y-102750000D03*
 D19*
+X122250000Y-102750000D03*
+D20*
 X122250000Y-105290000D03*
 D13*
 X195500000Y-29200000D03*
-D14*
+D16*
 X185340000Y-29200000D03*
-D22*
-X87000000Y-26500000D03*
-D13*
-X116910000Y-69500000D03*
 D14*
-X106750000Y-69500000D03*
+X127430000Y-91400000D03*
-D18*
+D15*
-X106770000Y-87720000D03*
+X129500000Y-92670000D03*
+X127430000Y-93940000D03*
 D23*
+X87000000Y-22750000D03*
+D13*
+X116855000Y-69500000D03*
+D16*
+X106695000Y-69500000D03*
+D19*
+X106770000Y-87720000D03*
+D24*
 X116930000Y-87720000D03*
 D13*
+X133000000Y-94000000D03*
+D16*
+X133000000Y-83840000D03*
+D13*
 X195500000Y-52900000D03*
-D14*
+D16*
 X185340000Y-52900000D03*
 D13*
 X198180000Y-71050000D03*
-D14*
+D16*
 X188020000Y-71050000D03*
-D22*
+D23*
-X203000000Y-26500000D03*
+X203000000Y-22750000D03*
+D13*
+X139920000Y-66500000D03*
+D16*
+X150080000Y-66500000D03*
 D13*
 X116910000Y-100250000D03*
-D14*
+D16*
 X106750000Y-100250000D03*
-D24*
+D13*
+X153100000Y-78010000D03*
+D16*
+X153100000Y-67850000D03*
+D14*
+X121500000Y-69860000D03*
+D15*
+X123570000Y-71130000D03*
+X121500000Y-72400000D03*
+D14*
+X127400000Y-69860000D03*
+D15*
+X129470000Y-71130000D03*
+X127400000Y-72400000D03*
+D25*
 X96500000Y-97650000D03*
 X96500000Y-106950000D03*
-D25*
+D26*
 X195485000Y-60100000D03*
-D26*
-X192945000Y-60100000D03*
-D20*
-X113930000Y-81220000D03*
-D21*
-X106730000Y-81220000D03*
 D27*
-X150100000Y-31750000D03*
+X192945000Y-60100000D03*
+D21*
+X113930000Y-81220000D03*
+D22*
+X106730000Y-81220000D03*
 D28*
-X150100000Y-34290000D03*
+X150100000Y-27460000D03*
-X150100000Y-36830000D03*
+D29*
-X150100000Y-39370000D03*
+X150100000Y-30000000D03*
-X150100000Y-41910000D03*
+X150100000Y-32540000D03*
-X150100000Y-44450000D03*
+X150100000Y-35080000D03*
-X150100000Y-46990000D03*
+X150100000Y-37620000D03*
-X150100000Y-49530000D03*
+X150100000Y-40160000D03*
-X172960000Y-49530000D03*
+X150100000Y-42700000D03*
-X172960000Y-46990000D03*
+X150100000Y-45240000D03*
-X172960000Y-44450000D03*
+X172960000Y-45240000D03*
-X172960000Y-41910000D03*
+X172960000Y-42700000D03*
-X172960000Y-39370000D03*
+X172960000Y-40160000D03*
-X172960000Y-36830000D03*
+X172960000Y-37620000D03*
-X172960000Y-34290000D03*
+X172960000Y-35080000D03*
-X172960000Y-31750000D03*
+X172960000Y-32540000D03*
-D25*
+X172960000Y-30000000D03*
-X195955000Y-77050000D03*
+X172960000Y-27460000D03*
+D26*
+X195400000Y-77000000D03*
+D27*
+X192860000Y-77000000D03*
+X190320000Y-77000000D03*
 D26*
-X193415000Y-77050000D03*
-X190875000Y-77050000D03*
-D25*
 X195485000Y-38630000D03*
-D26*
+D27*
 X192945000Y-38630000D03*
 X190405000Y-38630000D03*
 X187865000Y-38630000D03*
-D17*
+D30*
-X136750000Y-52500000D03*
+X131800000Y-50800000D03*
-D18*
-X174830000Y-82250000D03*
-D23*
-X174830000Y-92410000D03*
-D18*
-X122300000Y-32620000D03*
 D19*
+X174830000Y-82250000D03*
+D24*
+X174830000Y-92410000D03*
+D19*
+X122300000Y-32620000D03*
+D20*
 X122300000Y-35160000D03*
-D25*
-X172420000Y-99250000D03*
 D26*
-X174960000Y-99250000D03*
+X195600000Y-99250000D03*
-X177500000Y-99250000D03*
+D27*
-D12*
+X193060000Y-99250000D03*
-X138730000Y-70025000D03*
+X190520000Y-99250000D03*
-D14*
+D13*
-X138730000Y-67485000D03*
+X101455112Y-94200000D03*
-X131110000Y-67485000D03*
+X103955112Y-94200000D03*
-X131110000Y-70025000D03*
+D26*
-D25*
 X195490000Y-47890000D03*
-D26*
+D27*
 X192950000Y-47890000D03*
 X190410000Y-47890000D03*
 X187870000Y-47890000D03*
-D25*
+D13*
-X195485000Y-33980000D03*
+X133000000Y-45310000D03*
+D16*
+X133000000Y-35150000D03*
+D14*
+X138400000Y-45170000D03*
+D31*
+X136330000Y-43900000D03*
+X138400000Y-42630000D03*
 D26*
+X195485000Y-33980000D03*
+D27*
 X192945000Y-33980000D03*
 X190405000Y-33980000D03*
 X187865000Y-33980000D03*
-D13*
+D30*
-X142750000Y-33000000D03*
+X156500000Y-67860000D03*
-D14*
+D25*
-X142750000Y-43160000D03*
-D17*
-X157500000Y-68000000D03*
-D12*
-X138800000Y-42685000D03*
-D14*
-X138800000Y-40145000D03*
-X131180000Y-40145000D03*
-X131180000Y-42685000D03*
-D24*
 X96500000Y-42450000D03*
 X96500000Y-33150000D03*
 X96500000Y-64000000D03*
 X96500000Y-54700000D03*
-D15*
+D17*
 X129680000Y-62250000D03*
-D16*
+D18*
 X129680000Y-59710000D03*
 X129680000Y-57170000D03*
-D12*
+D30*
-X143630000Y-91470000D03*
+X188000000Y-67900000D03*
-D14*
-X143630000Y-88930000D03*
-X136010000Y-88930000D03*
-X136010000Y-91470000D03*
-D17*
-X193000000Y-65000000D03*
 D13*
 X187670000Y-88250000D03*
-D14*
-X197830000Y-88250000D03*
-D12*
-X119794888Y-54750000D03*
-D13*
-X122294888Y-54750000D03*
-D15*
-X129680000Y-83750000D03*
 D16*
+X197830000Y-88250000D03*
+D13*
+X102500000Y-66200000D03*
+X102500000Y-68700000D03*
+X116900000Y-95000000D03*
+D16*
+X106740000Y-95000000D03*
+D12*
+X101500000Y-90100000D03*
+D13*
+X104000000Y-90100000D03*
+X133000000Y-72460000D03*
+D16*
+X133000000Y-62300000D03*
+D17*
+X129680000Y-83750000D03*
+D18*
 X129680000Y-81210000D03*
 X129680000Y-78670000D03*
-D12*
-X128204000Y-108710000D03*
-X128204000Y-111250000D03*
 D14*
-X128178600Y-100455000D03*
+X138370000Y-72370000D03*
-X128204000Y-97915000D03*
-D12*
-X147000000Y-108837000D03*
-X147000000Y-111377000D03*
-D14*
-X147101600Y-100455000D03*
-X147127000Y-97915000D03*
-D18*
-X106760000Y-66240000D03*
-D23*
-X116920000Y-66240000D03*
-D22*
-X87000000Y-113500000D03*
-D29*
-X108910000Y-48540000D03*
-D30*
-X103830000Y-50700000D03*
 D31*
-X106370000Y-50700000D03*
+X136300000Y-71100000D03*
-X108910000Y-50700000D03*
+X138370000Y-69830000D03*
-X111450000Y-50700000D03*
+D19*
+X106760000Y-66240000D03*
+D24*
+X116920000Y-66240000D03*
+D23*
+X87000000Y-117250000D03*
+D13*
+X146480000Y-32600000D03*
+D16*
+X136320000Y-32600000D03*
+D32*
+X108900000Y-48620000D03*
+D33*
+X103820000Y-50780000D03*
+D34*
+X106360000Y-50780000D03*
+X108900000Y-50780000D03*
+X111440000Y-50780000D03*
 D13*
 X181830000Y-85750000D03*
 X181830000Y-88250000D03*
 D12*
-X122250000Y-111250000D03*
+X123600000Y-108750000D03*
 D13*
-X122250000Y-108750000D03*
+X123600000Y-111250000D03*
-D18*
+D19*
 X106870000Y-39160000D03*
-D23*
+D24*
 X117030000Y-39160000D03*
-D25*
+D13*
-X195485000Y-43250000D03*
+X136325000Y-39600000D03*
+D16*
+X146485000Y-39600000D03*
+D13*
+X117000000Y-46000000D03*
+D16*
+X106840000Y-46000000D03*
 D26*
+X195485000Y-43250000D03*
+D27*
 X192945000Y-43250000D03*
 X190405000Y-43250000D03*
 X187865000Y-43250000D03*
-D20*
+D13*
-X113990000Y-108095000D03*
+X116860000Y-73500000D03*
+D16*
+X106700000Y-73500000D03*
 D21*
+X113990000Y-108095000D03*
+D22*
 X106790000Y-108095000D03*
 D13*
 X116930000Y-90980000D03*
-D14*
+D16*
 X106770000Y-90980000D03*
-D18*
+D19*
 X170830000Y-82250000D03*
-D23*
-X170830000Y-92410000D03*
 D24*
+X170830000Y-92410000D03*
+D25*
 X96500000Y-85450000D03*
 X96500000Y-76150000D03*
-D13*
-X123000000Y-48570000D03*
 D14*
-X123000000Y-38410000D03*
+X121500000Y-42690000D03*
-D20*
+D15*
-X114000000Y-32610000D03*
+X123570000Y-43960000D03*
+X121500000Y-45230000D03*
+D14*
+X138400000Y-93900000D03*
+D31*
+X136330000Y-92630000D03*
+X138400000Y-91360000D03*
+D14*
+X121490000Y-91400000D03*
+D15*
+X123560000Y-92670000D03*
+X121490000Y-93940000D03*
 D21*
-X106800000Y-32610000D03*
+X114000000Y-32610000D03*
-D13*
-X106840000Y-45670000D03*
-D14*
-X117000000Y-45670000D03*
-D13*
-X106770000Y-94230000D03*
-D14*
-X116930000Y-94230000D03*
 D22*
-X203000000Y-113500000D03*
+X106800000Y-32610000D03*
-D25*
+D23*
-X177250000Y-47250000D03*
+X203000000Y-117250000D03*
 D26*
-X177250000Y-44710000D03*
+X177250000Y-42790000D03*
+D27*
+X177250000Y-40250000D03*
 D13*
-X122930000Y-75660000D03*
+X144200000Y-74300000D03*
-D14*
+D16*
-X122930000Y-65500000D03*
+X144200000Y-84460000D03*
-D13*
-X147430000Y-81890000D03*
-D14*
-X147430000Y-92050000D03*
-D17*
-X158500000Y-111250000D03*
-D18*
-X122230000Y-59710000D03*
 D19*
+X122230000Y-59710000D03*
+D20*
 X122230000Y-62250000D03*
 D13*
 X197830000Y-84250000D03*
-D14*
+D16*
 X187670000Y-84250000D03*
-D32*
+D35*
-X169750000Y-52500000D03*
+X169750000Y-50800000D03*
 %LPD*%
 M02*

KiCad/CanGrow/gerber/CanGrow-Edge_Cuts.gm1

@@ -1,11 +1,11 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.3*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
-G04 #@! TF.CreationDate,2024-06-05T14:32:50+02:00*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.3) date 2024-06-05 14:32:50*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -15,9 +15,9 @@ G04 #@! TA.AperFunction,Profile*
 G04 #@! TD*
 G04 APERTURE END LIST*
 D10*
-X83000000Y-22500000D02*
+X83000000Y-18750000D02*
-X207000000Y-22500000D01*
+X207000000Y-18750000D01*
-X207000000Y-117500000D01*
+X207000000Y-121250000D01*
-X83000000Y-117500000D01*
+X83000000Y-121250000D01*
-X83000000Y-22500000D01*
+X83000000Y-18750000D01*
 M02*

KiCad/CanGrow/gerber/CanGrow-F_Mask.gts

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.3*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
-G04 #@! TF.CreationDate,2024-06-05T14:32:50+02:00*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.3) date 2024-06-05 14:32:50*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*
@@ -31,321 +31,358 @@ G04 Aperture macros list*
 G04 Aperture macros list end*
 %ADD10R,1.600000X1.600000*%
 %ADD11C,1.600000*%
-%ADD12O,1.600000X1.600000*%
+%ADD12R,1.800000X1.100000*%
-%ADD13R,2.000000X1.905000*%
+%ADD13RoundRect,0.275000X-0.625000X0.275000X-0.625000X-0.275000X0.625000X-0.275000X0.625000X0.275000X0*%
-%ADD14O,2.000000X1.905000*%
+%ADD14O,1.600000X1.600000*%
-%ADD15RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
+%ADD15R,2.000000X1.905000*%
-%ADD16R,1.800000X1.800000*%
+%ADD16O,2.000000X1.905000*%
-%ADD17C,1.800000*%
+%ADD17R,1.800000X1.800000*%
-%ADD18RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
+%ADD18C,1.800000*%
-%ADD19C,6.000000*%
+%ADD19RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
-%ADD20C,5.600000*%
+%ADD20C,6.000000*%
-%ADD21O,1.800000X1.800000*%
+%ADD21C,5.600000*%
-%ADD22O,3.800000X8.000000*%
+%ADD22O,1.800000X1.800000*%
-%ADD23R,1.700000X1.700000*%
+%ADD23O,3.800000X8.000000*%
-%ADD24O,1.700000X1.700000*%
+%ADD24R,1.700000X1.700000*%
-%ADD25R,2.000000X2.000000*%
+%ADD25O,1.700000X1.700000*%
-%ADD26O,2.000000X1.600000*%
+%ADD26R,2.000000X2.000000*%
-%ADD27C,1.100000*%
+%ADD27O,2.000000X1.600000*%
-%ADD28R,1.730000X2.030000*%
+%ADD28RoundRect,0.250000X-0.550000X-0.550000X0.550000X-0.550000X0.550000X0.550000X-0.550000X0.550000X0*%
-%ADD29O,1.730000X2.030000*%
+%ADD29RoundRect,0.275000X0.625000X-0.275000X0.625000X0.275000X-0.625000X0.275000X-0.625000X-0.275000X0*%
-%ADD30RoundRect,0.250001X0.799999X0.799999X-0.799999X0.799999X-0.799999X-0.799999X0.799999X-0.799999X0*%
+%ADD30C,1.100000*%
+%ADD31R,1.730000X2.030000*%
+%ADD32O,1.730000X2.030000*%
+%ADD33RoundRect,0.250000X0.550000X0.550000X-0.550000X0.550000X-0.550000X-0.550000X0.550000X-0.550000X0*%
 G04 APERTURE END LIST*
 D10*
-X101500000Y-90100000D03*
+X156600000Y-108750000D03*
 D11*
-X104000000Y-90100000D03*
+X156600000Y-111250000D03*
-X103955112Y-94200000D03*
-X101455112Y-94200000D03*
-D10*
-X153500000Y-111250000D03*
-D11*
-X153500000Y-108750000D03*
-X123520000Y-88850000D03*
 D12*
-X133680000Y-88850000D03*
+X127400000Y-42690000D03*
+D13*
+X129470000Y-43960000D03*
+X127400000Y-45230000D03*
 D11*
 X117000000Y-42420000D03*
-D12*
-X106840000Y-42420000D03*
-D13*
-X138430000Y-83750000D03*
 D14*
+X106840000Y-42420000D03*
+D15*
+X138430000Y-83750000D03*
+D16*
 X138430000Y-81210000D03*
 X138430000Y-78670000D03*
-D13*
+D15*
 X129800000Y-35150000D03*
-D14*
+D16*
 X129800000Y-32610000D03*
 X129800000Y-30070000D03*
 D11*
+X139900000Y-53320000D03*
+D14*
+X139900000Y-63480000D03*
+D10*
+X130748000Y-108846000D03*
+X130748000Y-111386000D03*
+D14*
+X130722600Y-100478000D03*
+X130748000Y-97938000D03*
+D10*
+X149544000Y-108860000D03*
+X149544000Y-111400000D03*
+D14*
+X149645600Y-100478000D03*
+X149671000Y-97938000D03*
+D11*
 X177750000Y-92250000D03*
-D12*
+D14*
 X187910000Y-92250000D03*
-D15*
+D17*
-X153750000Y-68000000D03*
-D11*
-X106750000Y-72750000D03*
-D12*
-X116910000Y-72750000D03*
-D11*
-X142680000Y-60340000D03*
-D12*
-X142680000Y-70500000D03*
-D16*
 X122231000Y-81220000D03*
-D17*
-X122231000Y-83760000D03*
 D18*
-X113930000Y-59700000D03*
+X122231000Y-83760000D03*
 D19*
+X113930000Y-59700000D03*
+D20*
 X106730000Y-59700000D03*
-D16*
-X122250000Y-102750000D03*
 D17*
+X122250000Y-102750000D03*
+D18*
 X122250000Y-105290000D03*
 D11*
 X195500000Y-29200000D03*
-D12*
+D14*
 X185340000Y-29200000D03*
-D20*
-X87000000Y-26500000D03*
-D11*
-X116910000Y-69500000D03*
 D12*
-X106750000Y-69500000D03*
+X127430000Y-91400000D03*
-D16*
+D13*
-X106770000Y-87720000D03*
+X129500000Y-92670000D03*
+X127430000Y-93940000D03*
 D21*
+X87000000Y-22750000D03*
+D11*
+X116855000Y-69500000D03*
+D14*
+X106695000Y-69500000D03*
+D17*
+X106770000Y-87720000D03*
+D22*
 X116930000Y-87720000D03*
 D11*
+X133000000Y-94000000D03*
+D14*
+X133000000Y-83840000D03*
+D11*
 X195500000Y-52900000D03*
-D12*
+D14*
 X185340000Y-52900000D03*
 D11*
 X198180000Y-71050000D03*
-D12*
+D14*
 X188020000Y-71050000D03*
-D20*
+D21*
-X203000000Y-26500000D03*
+X203000000Y-22750000D03*
+D11*
+X139920000Y-66500000D03*
+D14*
+X150080000Y-66500000D03*
 D11*
 X116910000Y-100250000D03*
-D12*
+D14*
 X106750000Y-100250000D03*
-D22*
+D11*
+X153100000Y-78010000D03*
+D14*
+X153100000Y-67850000D03*
+D12*
+X121500000Y-69860000D03*
+D13*
+X123570000Y-71130000D03*
+X121500000Y-72400000D03*
+D12*
+X127400000Y-69860000D03*
+D13*
+X129470000Y-71130000D03*
+X127400000Y-72400000D03*
+D23*
 X96500000Y-97650000D03*
 X96500000Y-106950000D03*
-D23*
+D24*
 X195485000Y-60100000D03*
-D24*
-X192945000Y-60100000D03*
-D18*
-X113930000Y-81220000D03*
-D19*
-X106730000Y-81220000D03*
 D25*
-X150100000Y-31750000D03*
+X192945000Y-60100000D03*
+D19*
+X113930000Y-81220000D03*
+D20*
+X106730000Y-81220000D03*
 D26*
-X150100000Y-34290000D03*
+X150100000Y-27460000D03*
-X150100000Y-36830000D03*
+D27*
-X150100000Y-39370000D03*
+X150100000Y-30000000D03*
-X150100000Y-41910000D03*
+X150100000Y-32540000D03*
-X150100000Y-44450000D03*
+X150100000Y-35080000D03*
-X150100000Y-46990000D03*
+X150100000Y-37620000D03*
-X150100000Y-49530000D03*
+X150100000Y-40160000D03*
-X172960000Y-49530000D03*
+X150100000Y-42700000D03*
-X172960000Y-46990000D03*
+X150100000Y-45240000D03*
-X172960000Y-44450000D03*
+X172960000Y-45240000D03*
-X172960000Y-41910000D03*
+X172960000Y-42700000D03*
-X172960000Y-39370000D03*
+X172960000Y-40160000D03*
-X172960000Y-36830000D03*
+X172960000Y-37620000D03*
-X172960000Y-34290000D03*
+X172960000Y-35080000D03*
-X172960000Y-31750000D03*
+X172960000Y-32540000D03*
-D23*
+X172960000Y-30000000D03*
-X195955000Y-77050000D03*
+X172960000Y-27460000D03*
+D24*
+X195400000Y-77000000D03*
+D25*
+X192860000Y-77000000D03*
+X190320000Y-77000000D03*
 D24*
-X193415000Y-77050000D03*
-X190875000Y-77050000D03*
-D23*
 X195485000Y-38630000D03*
-D24*
+D25*
 X192945000Y-38630000D03*
 X190405000Y-38630000D03*
 X187865000Y-38630000D03*
-D15*
+D28*
-X136750000Y-52500000D03*
+X131800000Y-50800000D03*
-D16*
-X174830000Y-82250000D03*
-D21*
-X174830000Y-92410000D03*
-D16*
-X122300000Y-32620000D03*
 D17*
+X174830000Y-82250000D03*
+D22*
+X174830000Y-92410000D03*
+D17*
+X122300000Y-32620000D03*
+D18*
 X122300000Y-35160000D03*
-D23*
-X172420000Y-99250000D03*
 D24*
-X174960000Y-99250000D03*
+X195600000Y-99250000D03*
-X177500000Y-99250000D03*
+D25*
-D10*
+X193060000Y-99250000D03*
-X138730000Y-70025000D03*
+X190520000Y-99250000D03*
-D12*
+D11*
-X138730000Y-67485000D03*
+X101455112Y-94200000D03*
-X131110000Y-67485000D03*
+X103955112Y-94200000D03*
-X131110000Y-70025000D03*
+D24*
-D23*
 X195490000Y-47890000D03*
-D24*
+D25*
 X192950000Y-47890000D03*
 X190410000Y-47890000D03*
 X187870000Y-47890000D03*
-D23*
+D11*
-X195485000Y-33980000D03*
+X133000000Y-45310000D03*
+D14*
+X133000000Y-35150000D03*
+D12*
+X138400000Y-45170000D03*
+D29*
+X136330000Y-43900000D03*
+X138400000Y-42630000D03*
 D24*
+X195485000Y-33980000D03*
+D25*
 X192945000Y-33980000D03*
 X190405000Y-33980000D03*
 X187865000Y-33980000D03*
-D11*
+D28*
-X142750000Y-33000000D03*
+X156500000Y-67860000D03*
-D12*
+D23*
-X142750000Y-43160000D03*
-D15*
-X157500000Y-68000000D03*
-D10*
-X138800000Y-42685000D03*
-D12*
-X138800000Y-40145000D03*
-X131180000Y-40145000D03*
-X131180000Y-42685000D03*
-D22*
 X96500000Y-42450000D03*
 X96500000Y-33150000D03*
 X96500000Y-64000000D03*
 X96500000Y-54700000D03*
-D13*
+D15*
 X129680000Y-62250000D03*
-D14*
+D16*
 X129680000Y-59710000D03*
 X129680000Y-57170000D03*
-D10*
+D28*
-X143630000Y-91470000D03*
+X188000000Y-67900000D03*
-D12*
-X143630000Y-88930000D03*
-X136010000Y-88930000D03*
-X136010000Y-91470000D03*
-D15*
-X193000000Y-65000000D03*
 D11*
 X187670000Y-88250000D03*
-D12*
-X197830000Y-88250000D03*
-D10*
-X119794888Y-54750000D03*
-D11*
-X122294888Y-54750000D03*
-D13*
-X129680000Y-83750000D03*
 D14*
+X197830000Y-88250000D03*
+D11*
+X102500000Y-66200000D03*
+X102500000Y-68700000D03*
+X116900000Y-95000000D03*
+D14*
+X106740000Y-95000000D03*
+D10*
+X101500000Y-90100000D03*
+D11*
+X104000000Y-90100000D03*
+X133000000Y-72460000D03*
+D14*
+X133000000Y-62300000D03*
+D15*
+X129680000Y-83750000D03*
+D16*
 X129680000Y-81210000D03*
 X129680000Y-78670000D03*
-D10*
-X128204000Y-108710000D03*
-X128204000Y-111250000D03*
 D12*
-X128178600Y-100455000D03*
+X138370000Y-72370000D03*
-X128204000Y-97915000D03*
-D10*
-X147000000Y-108837000D03*
-X147000000Y-111377000D03*
-D12*
-X147101600Y-100455000D03*
-X147127000Y-97915000D03*
-D16*
-X106760000Y-66240000D03*
-D21*
-X116920000Y-66240000D03*
-D20*
-X87000000Y-113500000D03*
-D27*
-X108910000Y-48540000D03*
-D28*
-X103830000Y-50700000D03*
 D29*
-X106370000Y-50700000D03*
+X136300000Y-71100000D03*
-X108910000Y-50700000D03*
+X138370000Y-69830000D03*
-X111450000Y-50700000D03*
+D17*
+X106760000Y-66240000D03*
+D22*
+X116920000Y-66240000D03*
+D21*
+X87000000Y-117250000D03*
+D11*
+X146480000Y-32600000D03*
+D14*
+X136320000Y-32600000D03*
+D30*
+X108900000Y-48620000D03*
+D31*
+X103820000Y-50780000D03*
+D32*
+X106360000Y-50780000D03*
+X108900000Y-50780000D03*
+X111440000Y-50780000D03*
 D11*
 X181830000Y-85750000D03*
 X181830000Y-88250000D03*
 D10*
-X122250000Y-111250000D03*
+X123600000Y-108750000D03*
 D11*
-X122250000Y-108750000D03*
+X123600000Y-111250000D03*
-D16*
+D17*
 X106870000Y-39160000D03*
-D21*
+D22*
 X117030000Y-39160000D03*
-D23*
+D11*
-X195485000Y-43250000D03*
+X136325000Y-39600000D03*
+D14*
+X146485000Y-39600000D03*
+D11*
+X117000000Y-46000000D03*
+D14*
+X106840000Y-46000000D03*
 D24*
+X195485000Y-43250000D03*
+D25*
 X192945000Y-43250000D03*
 X190405000Y-43250000D03*
 X187865000Y-43250000D03*
-D18*
+D11*
-X113990000Y-108095000D03*
+X116860000Y-73500000D03*
+D14*
+X106700000Y-73500000D03*
 D19*
+X113990000Y-108095000D03*
+D20*
 X106790000Y-108095000D03*
 D11*
 X116930000Y-90980000D03*
-D12*
+D14*
 X106770000Y-90980000D03*
-D16*
+D17*
 X170830000Y-82250000D03*
-D21*
-X170830000Y-92410000D03*
 D22*
+X170830000Y-92410000D03*
+D23*
 X96500000Y-85450000D03*
 X96500000Y-76150000D03*
-D11*
-X123000000Y-48570000D03*
 D12*
-X123000000Y-38410000D03*
+X121500000Y-42690000D03*
-D18*
+D13*
-X114000000Y-32610000D03*
+X123570000Y-43960000D03*
+X121500000Y-45230000D03*
+D12*
+X138400000Y-93900000D03*
+D29*
+X136330000Y-92630000D03*
+X138400000Y-91360000D03*
+D12*
+X121490000Y-91400000D03*
+D13*
+X123560000Y-92670000D03*
+X121490000Y-93940000D03*
 D19*
-X106800000Y-32610000D03*
+X114000000Y-32610000D03*
-D11*
-X106840000Y-45670000D03*
-D12*
-X117000000Y-45670000D03*
-D11*
-X106770000Y-94230000D03*
-D12*
-X116930000Y-94230000D03*
 D20*
-X203000000Y-113500000D03*
+X106800000Y-32610000D03*
-D23*
+D21*
-X177250000Y-47250000D03*
+X203000000Y-117250000D03*
 D24*
-X177250000Y-44710000D03*
+X177250000Y-42790000D03*
+D25*
+X177250000Y-40250000D03*
 D11*
-X122930000Y-75660000D03*
+X144200000Y-74300000D03*
-D12*
+D14*
-X122930000Y-65500000D03*
+X144200000Y-84460000D03*
-D11*
-X147430000Y-81890000D03*
-D12*
-X147430000Y-92050000D03*
-D15*
-X158500000Y-111250000D03*
-D16*
-X122230000Y-59710000D03*
 D17*
+X122230000Y-59710000D03*
+D18*
 X122230000Y-62250000D03*
 D11*
 X197830000Y-84250000D03*
-D12*
+D14*
 X187670000Y-84250000D03*
-D30*
+D33*
-X169750000Y-52500000D03*
+X169750000Y-50800000D03*
 M02*

KiCad/CanGrow/gerber/CanGrow-F_Paste.gtp

@@ -1,12 +1,12 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.3*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.5*
-G04 #@! TF.CreationDate,2024-06-05T14:32:50+02:00*
+G04 #@! TF.CreationDate,2024-09-25T02:09:32+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.3) date 2024-06-05 14:32:50*
+G04 Created by KiCad (PCBNEW 8.0.5) date 2024-09-25 02:09:32*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-NPTH.drl

@@ -1,8 +1,8 @@
 M48
-; DRILL file {KiCad 8.0.3} date 2024-06-05T14:32:52+0200
+; DRILL file {KiCad 8.0.5} date 2024-09-25T02:09:34+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2024-06-05T14:32:52+02:00
+; #@! TF.CreationDate,2024-09-25T02:09:34+02:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.3
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.5
 ; #@! TF.FileFunction,NonPlated,1,2,NPTH
 FMAT,2
 METRIC
@@ -12,5 +12,5 @@ T1C1.100
 G90
 G05
 T1
-X108.91Y-48.54
+X108.9Y-48.62
 M30

KiCad/CanGrow/gerber/CanGrow-PTH.drl

@@ -1,87 +1,114 @@
 M48
-; DRILL file {KiCad 8.0.3} date 2024-06-05T14:32:52+0200
+; DRILL file {KiCad 8.0.5} date 2024-09-25T02:09:34+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2024-06-05T14:32:52+02:00
+; #@! TF.CreationDate,2024-09-25T02:09:34+02:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.3
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.5
 ; #@! TF.FileFunction,Plated,1,2,PTH
 FMAT,2
 METRIC
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T1C0.800
+T1C0.750
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T2C0.900
+T2C0.800
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T3C1.000
+T3C0.900
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T4C1.020
+T4C1.000
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T5C1.100
+T5C1.020
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T6C2.000
+T6C1.100
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T7C3.200
+T7C2.000
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T8C4.500
+T8C3.200
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T9C4.500
 %
 G90
 G05
 T1
+X121.89Y-91.4
+X121.89Y-93.94
+X121.9Y-42.69
+X121.9Y-45.23
+X121.9Y-69.86
+X121.9Y-72.4
+X123.16Y-92.67
+X123.17Y-43.96
+X123.17Y-71.13
+X127.8Y-42.69
+X127.8Y-45.23
+X127.8Y-69.86
+X127.8Y-72.4
+X127.83Y-91.4
+X127.83Y-93.94
+X129.07Y-43.96
+X129.07Y-71.13
+X129.1Y-92.67
+X136.7Y-71.1
+X136.73Y-43.9
+X136.73Y-92.63
+X137.97Y-69.83
+X137.97Y-72.37
+X138.0Y-42.63
+X138.0Y-45.17
+X138.0Y-91.36
+X138.0Y-93.9
+T2
 X101.455Y-94.2
 X101.5Y-90.1
+X102.5Y-66.2
+X102.5Y-68.7
 X103.955Y-94.2
 X104.0Y-90.1
-X106.75Y-69.5
+X106.695Y-69.5
-X106.75Y-72.75
+X106.7Y-73.5
+X106.74Y-95.0
 X106.75Y-100.25
 X106.77Y-90.98
-X106.77Y-94.23
 X106.84Y-42.42
-X106.84Y-45.67
+X106.84Y-46.0
-X116.91Y-69.5
+X116.855Y-69.5
-X116.91Y-72.75
+X116.86Y-73.5
+X116.9Y-95.0
 X116.91Y-100.25
 X116.93Y-90.98
-X116.93Y-94.23
 X117.0Y-42.42
-X117.0Y-45.67
+X117.0Y-46.0
-X119.795Y-54.75
+X123.6Y-108.75
-X122.25Y-108.75
+X123.6Y-111.25
-X122.25Y-111.25
+X130.723Y-100.478
-X122.295Y-54.75
+X130.748Y-97.938
-X122.93Y-65.5
+X130.748Y-108.846
-X122.93Y-75.66
+X130.748Y-111.386
-X123.0Y-38.41
+X131.8Y-50.8
-X123.0Y-48.57
+X133.0Y-35.15
-X123.52Y-88.85
+X133.0Y-45.31
-X128.179Y-100.455
+X133.0Y-62.3
-X128.204Y-97.915
+X133.0Y-72.46
-X128.204Y-108.71
+X133.0Y-83.84
-X128.204Y-111.25
+X133.0Y-94.0
-X131.11Y-67.485
+X136.32Y-32.6
-X131.11Y-70.025
+X136.325Y-39.6
-X131.18Y-40.145
+X139.9Y-53.32
-X131.18Y-42.685
+X139.9Y-63.48
-X133.68Y-88.85
+X139.92Y-66.5
-X136.01Y-88.93
+X144.2Y-74.3
-X136.01Y-91.47
+X144.2Y-84.46
-X138.73Y-67.485
+X146.48Y-32.6
-X138.73Y-70.025
+X146.485Y-39.6
-X138.8Y-40.145
+X149.544Y-108.86
-X138.8Y-42.685
+X149.544Y-111.4
-X142.68Y-60.34
+X149.646Y-100.478
-X142.68Y-70.5
+X149.671Y-97.938
-X142.75Y-33.0
+X150.08Y-66.5
-X142.75Y-43.16
+X153.1Y-67.85
-X143.63Y-88.93
+X153.1Y-78.01
-X143.63Y-91.47
+X156.5Y-67.86
-X147.0Y-108.837
+X156.6Y-108.75
-X147.0Y-111.377
+X156.6Y-111.25
-X147.102Y-100.455
+X169.75Y-50.8
-X147.127Y-97.915
-X147.43Y-81.89
-X147.43Y-92.05
-X153.5Y-108.75
-X153.5Y-111.25
 X177.75Y-92.25
 X181.83Y-85.75
 X181.83Y-88.25
@@ -90,13 +117,14 @@ X185.34Y-52.9
 X187.67Y-84.25
 X187.67Y-88.25
 X187.91Y-92.25
+X188.0Y-67.9
 X188.02Y-71.05
 X195.5Y-29.2
 X195.5Y-52.9
 X197.83Y-84.25
 X197.83Y-88.25
 X198.18Y-71.05
-T2
+T3
 X106.76Y-66.24
 X106.77Y-87.72
 X106.87Y-39.16
@@ -115,55 +143,55 @@ X170.83Y-82.25
 X170.83Y-92.41
 X174.83Y-82.25
 X174.83Y-92.41
-T3
+T4
-X150.1Y-31.75
+X150.1Y-27.46
-X150.1Y-34.29
+X150.1Y-30.0
-X150.1Y-36.83
+X150.1Y-32.54
-X150.1Y-39.37
+X150.1Y-35.08
-X150.1Y-41.91
+X150.1Y-37.62
-X150.1Y-44.45
+X150.1Y-40.16
-X150.1Y-46.99
+X150.1Y-42.7
-X150.1Y-49.53
+X150.1Y-45.24
-X172.42Y-99.25
+X172.96Y-27.46
-X172.96Y-31.75
+X172.96Y-30.0
-X172.96Y-34.29
+X172.96Y-32.54
-X172.96Y-36.83
+X172.96Y-35.08
-X172.96Y-39.37
+X172.96Y-37.62
-X172.96Y-41.91
+X172.96Y-40.16
-X172.96Y-44.45
+X172.96Y-42.7
-X172.96Y-46.99
+X172.96Y-45.24
-X172.96Y-49.53
+X177.25Y-40.25
-X174.96Y-99.25
+X177.25Y-42.79
-X177.25Y-44.71
-X177.25Y-47.25
-X177.5Y-99.25
 X187.865Y-33.98
 X187.865Y-38.63
 X187.865Y-43.25
 X187.87Y-47.89
+X190.32Y-77.0
 X190.405Y-33.98
 X190.405Y-38.63
 X190.405Y-43.25
 X190.41Y-47.89
-X190.875Y-77.05
+X190.52Y-99.25
+X192.86Y-77.0
 X192.945Y-33.98
 X192.945Y-38.63
 X192.945Y-43.25
 X192.945Y-60.1
 X192.95Y-47.89
-X193.415Y-77.05
+X193.06Y-99.25
+X195.4Y-77.0
 X195.485Y-33.98
 X195.485Y-38.63
 X195.485Y-43.25
 X195.485Y-60.1
 X195.49Y-47.89
-X195.955Y-77.05
+X195.6Y-99.25
-T4
-X103.83Y-50.7
-X106.37Y-50.7
-X108.91Y-50.7
-X111.45Y-50.7
 T5
+X103.82Y-50.78
+X106.36Y-50.78
+X108.9Y-50.78
+X111.44Y-50.78
+T6
 X129.68Y-57.17
 X129.68Y-59.71
 X129.68Y-62.25
@@ -173,21 +201,15 @@ X129.68Y-83.75
 X129.8Y-30.07
 X129.8Y-32.61
 X129.8Y-35.15
-X136.75Y-52.5
 X138.43Y-78.67
 X138.43Y-81.21
 X138.43Y-83.75
-X153.75Y-68.0
-X157.5Y-68.0
-X158.5Y-111.25
-X169.75Y-52.5
-X193.0Y-65.0
-T7
-X87.0Y-26.5
-X87.0Y-113.5
-X203.0Y-26.5
-X203.0Y-113.5
 T8
+X87.0Y-22.75
+X87.0Y-117.25
+X203.0Y-22.75
+X203.0Y-117.25
+T9
 X106.73Y-59.7
 X106.73Y-81.22
 X106.79Y-108.095
@@ -196,7 +218,7 @@ X113.93Y-59.7
 X113.93Y-81.22
 X113.99Y-108.095
 X114.0Y-32.61
-T6
+T7
 X96.5Y-35.15G85X96.5Y-31.15
 G05
 X96.5Y-44.45G85X96.5Y-40.45

README.md

@@ -4,25 +4,63 @@
 ![CanGrowLogo](Logo/CanGrow_Logo.png)
 
 
-A simple DIY plant growing system (for cannabis).
+An easy to use DIY grow controller firmware (for cannabis).
 
-![CanGrow_PCB_Front.png](KiCad/CanGrow/CanGrow_PCB_Front_small.png)
 ![Screenshot_WebUI_root.png](Arduino/CanGrow/Screenshot_WebUI_root.png)
+![CanGrow_PCB_Front.png](KiCad/CanGrow/CanGrow_PCB_Front_small.png)
 
 # WORK IN PROGRESS
 
 ## Motivation
+I havn't found an already existing grow controller project within the ESP / Arduino Core eco system which 
+met my personal requirements. 
+Those are an easy DIY, using low cost parts, Arduino Core sourcecode to hack own things together, having a WebUI, grab some Metrics for monitoring, standalone and my very special need that the Hardware should run completely with 12V. 
 
-I want to build a simple grow system, which I can power by my off-grid
+### Update 14.09.2024 - Code Rewrite v0.2
-12V solar system. So this project is limited to a small 40x40x120 tent
-for one plant with a 50W 12V grow LED light.
 
-As I did it for my solar system, the measurements of this project will be shown
+I took some "summer break" from the project, and had the opportunity to talk to different people about it.
-on my website. For that a REST API is planned.
+My conclusion at this point is, that the focus of this project is not the Hardware, it came out that it should be the software.
+So I decided to completely rewrite the code from 0 - with recycling some parts of it. 
+Goal of the Rewrite is that the Firmware becomes more independent of the hardware used. It has to support both ESP8266 and ESP32 
+and let the user decide at which pin which output, sensor or whatever will be connected to. Like done in the [Tasmota](https://github.com/arendst/Tasmota) Firmware, I also want to support "Hardware Templates" which come with presets for PCBs like the one I created.
 
-I want to automate as much as possible which makes sense and is easy to build.
+**Checklist for v0.2 Firmware**
+- Support ESP8266 and ESP32 
+- AsyncWebserver instead ESP8266Webserver
+- LittleFS instead of EEPROM()
+- deliver static HTML, dynamic Stuff with Javascript
+  - (or is there a better way? please tell me!)
+- Free configurable outputs
+  - Main outputs for Light, Air, Water 
+  - Support for Tasmota Wifi Plugs (and others?)
+  - No Limitation for Amount of outputs 
+  - Light
+    - support for I2C 0-10V Dimm control
+    - PWM dimm control
+  - Air
+    - support for I2C 0-10V Dimm control
+    - PWM dimm control
+    - Support for humidifier, heater (, CO2?)
+    - Read Fan RPM
+  - Water
+    - Usual watering
+    - Pump for fertilizer
+- Free configurable Inputs
+  - Support for various I2C devices
+    - All kind of sensors for Temp, Humidity, Moisture, and so on
+    - Support for ADCs to connect multiple analoge sensors
+  - Support for Analog inputs
+    - onboard ones or I2C (ADC)
+    - Analog Multiplexer support (like CD4051)
+  - Calibrate sensors 
+    - define 0% and 100% values
+    - Offsets
+- MQTT support
+- API
 
-## Features / ToDo List
+  
+  
+## Old v0.1 Features / ToDo List
 
 - Measure values :white_check_mark:
   - Humidity :white_check_mark:
@@ -54,14 +92,3 @@ I want to automate as much as possible which makes sense and is easy to build.
   - low cost as possible! :white_check_mark:
 
 :white_check_mark: Done - :large_blue_circle: In Progress - :red_circle: ToDo
-
-## Parts used
-
-- ESP8266 D1 mini
-- BME280 humidity and temp sensor
-- I2C soil moisture sensor: https://github.com/Miceuz/i2c-moisture-sensor /  https://eu.robotshop.com/de/products/i2c-soil-moisture-sensor
-- cheap capacitive soilmoisture sensor: https://www.az-delivery.de/products/bodenfeuchte-sensor-modul-v1-2
-
-- 50W LED 12V full spectrum grow light: https://www.ebay.de/itm/354322466159
-- MOSFETS (some i have fyling around, IRFZ44, IRF3205, IRF3710, BUZZ11...)
-- 12V 4W water pump set https://www.ebay.de/itm/394413649692

arduino-cli.yml

@@ -0,0 +1,3 @@
+board_manager:
+  additional_urls:
+    - http://arduino.esp8266.com/stable/package_esp8266com_index.json

cangrow.sh

@@ -4,39 +4,98 @@
 test -z $TTY && TTY="/dev/ttyUSB0"
 test -z $IP && IP="192.168.30.212"
 test -z $VER && VER="0.1-dev"
-BUILD="$(git rev-parse --short HEAD)"
+BUILD="$(git rev-parse --short HEAD)-$(date '+%Y%m%d%H%M%S')"
+
+ACLI="$HOME/.local/bin/arduino-cli"
+ACLI_CMD="$ACLI --config-file arduino-cli.yml"
+BOARD="esp8266:esp8266:d1_mini_clone"
 
 function help() {
-	echo "$0 [build|upload|webupload|monitor]"
+	echo "$0 [setup|build|upload|webupload|monitor]"
+	echo "setup: setup build environment, download arduino-cli, install all dependencies for arduino ide"
+	echo "build: build firmware binary. will be saved into build/"
+	echo "upload: upload firmware by serial connection $TTY"
+	echo "webupload: upload firmware with webupload to $IP"
+	echo "monitor: serial monitor $TTY"
 	exit 1
 }
 
+function check_acli() {
+	if [ ! -x $ACLI ]
+	then
+		echo "$ACLI does not exist nor is executable. Please run '$0 setup' first"
+		exit 1
+	fi
+}
+
 test -z $1 && help
 
 case $1 in
+	s|setup)
+		ACLI_DIR="$(dirname $ACLI)"
+		declare -a LIBS=( "Adafruit SSD1306" "Adafruit BME280 Library" "ArduinoJson" "NTPClient" "Time" )
+		echo ":: Setting up build environment for CanGrow Firmware."
+		echo "   This will download the binary for arduino-cli and install"
+		echo "   the packages for the arduino ide from the debian repository."
+		echo "   !! This script is meant to be executed on a Debian stable (bookworm) system !!"
+		echo ""
+		echo ":: Press Enter to continue"
+		read
+		echo ""
+		echo ":: Installing Arduino IDE packages with apt, please enter sudo password:"
+		sudo apt update 
+		sudo apt install arduino python3 wget curl xxd
+		echo ":: Ensure directory ${ACLI_DIR} is present"
+		test -d ${ACLI_DIR} || mkdir -p ${ACLI_DIR}
+		echo ":: Please ensure ${ACLI_DIR} is in your \$PATH, I wont do it."
+		echo ""
+		echo ":: Downloading arduino-cli 1.0.0 into ${ACLI_DIR}/"
+		wget -O - "https://github.com/arduino/arduino-cli/releases/download/v1.0.0/arduino-cli_1.0.0_Linux_64bit.tar.gz" | tar -C ${ACLI_DIR} -zxvf - arduino-cli 
+		chmod +x ${ACLI}
+		echo ""
+		echo ":: Installing ESP8266 core for Arduino"
+		${ACLI_CMD} core install esp8266:esp8266
+		echo ":: Installing Arduino libraries"
+		for lib in ${!LIBS[@]}
+		do
+			echo "     - ${LIBS[$lib]}"
+		done
+		
+		for lib in ${!LIBS[@]}
+		do
+			${ACLI_CMD} lib install "${LIBS[$lib]}"
+		done
+		echo ""
+		echo ":: Setup build environment done! You can now build the firmware"
+		echo "   with: $0 build"
+
+		;;
 	b|build)
-		echo "building firmware $VER $BUILD, target dir: $(pwd)/build/"
+		check_acli
+		echo ":: Building firmware $VER $BUILD, target dir: $(pwd)/build/"
 		test -d build || mkdir build
 		echo "/* CanGrow_Version.h gets generated from cangrow.sh */
 
 const char* CanGrowVer = \"${VER}\";
 const char* CanGrowBuild = \"${BUILD}\";
 " > Arduino/CanGrow/CanGrow_Version.h
-		~/.local/bin/arduino-cli --no-color compile -b esp8266:esp8266:d1_mini_clone  "Arduino/CanGrow/CanGrow.ino" --output-dir build/ || exit 1
+		${ACLI_CMD} --no-color compile -b ${BOARD}  "Arduino/CanGrow/CanGrow.ino" --output-dir build/ || exit 1
 		cp build/CanGrow.ino.bin build/CanGrow_v${VER}_${BUILD}.bin
 		;;
 	u|upload)
-		echo "uploading to $TTY"
+		check_acli
-		~/.local/bin/arduino-cli --no-color compile -v  -b esp8266:esp8266:d1_mini_clone -u -p $TTY  "Arduino/CanGrow/CanGrow.ino"
+		echo ":: Uploading to $TTY"
+		${ACLI_CMD} --no-color compile -v  -b ${BOARD} -u -p $TTY  "Arduino/CanGrow/CanGrow.ino"
 		;;
 	w|webupload)
-		echo "uploading to $IP"
+		echo ":: Uploading to $IP"
-		curl -v http://$IP/system/applyUpdate -X POST -H 'Content-Type: multipart/form-data' -F "image=@$(pwd)/build/CanGrow.ino.bin"
+		curl -v http://$IP/system/applyUpdate -X POST -H 'Content-Type: multipart/form-data' -F "firmware=@$(pwd)/build/CanGrow.ino.bin"
 		echo
 		;;	
 	m|mon|monitor)
-		echo "open monitor $TTY"
+		check_acli
-		~/.local/bin/arduino-cli monitor -c baudrate=115200 -p $TTY
+		echo ":: Open serial monitor $TTY"
+		${ACLI_CMD} monitor -c baudrate=115200 -b ${BOARD} -p $TTY
 		;;
 	*)
 		help