cangrow.sh - add setup, to setup cangrow build environment

Arduino/CanGrow/CanGrow.ino

@@ -278,7 +278,7 @@ void loop() {
  *   - PumpOnTime (int) in sec
  *   - PumpInterval (int) in days
  *   - SoilmoistureLow (int) in %
- *   
+ *   - PumpLastOn (long) timestamp
  * 
  */  
   

Arduino/CanGrow/CanGrow_Version.h

@@ -1,5 +1,5 @@
 /* CanGrow_Version.h gets generated from cangrow.sh */
 
 const char* CanGrowVer = "0.1-dev";
-const char* CanGrowBuild = "e524826";
+const char* CanGrowBuild = "52abf8e";
 

cangrow.sh

@@ -6,15 +6,66 @@ test -z $IP && IP="192.168.30.212"
 test -z $VER && VER="0.1-dev"
 BUILD="$(git rev-parse --short HEAD)"
 
+ACLI="$HOME/.local/bin/arduino-cli"
+ACLI_CMD="$ACLI --config-file arduino-cli.yml"
+
+
 function help() {
-	echo "$0 [build|upload|webupload|monitor]"
+	echo "$0 [setup|build|upload|webupload|monitor]"
 	exit 1
 }
 
+function check_acli() {
+	if [ ! -x $ACLI ]
+	then
+		echo "$ACLI does not exist nor is executable. Please run '$0 setup' first"
+		exit 1
+	fi
+}
+
 test -z $1 && help
 
 case $1 in
+	s|setup)
+		ACLI_DIR="$(dirname $ACLI)"
+		declare -a LIBS=( "Adafruit SSD1306" "Adafruit BME280 Library" "ArduinoJson" "NTPClient" "Time" )
+		echo ":: Setting up build environment for CanGrow Firmware."
+		echo "   This will download the binary for arduino-cli and install"
+		echo "   the packages for the arduino ide from the debian repository."
+		echo ""
+		echo ":: Press Enter to continue"
+		read
+		echo ":: Ensure directory ${ACLI_DIR} is present"
+		test -d ${ACLI_DIR} || mkdir -p ${ACLI_DIR}
+		echo ":: Please ensure ${ACLI_DIR} is in your \$PATH, I wont do it."
+		echo ""
+		echo ":: Downloading arduino-cli 1.0.0 into ${ACLI_DIR}/"
+		wget -O - "https://github.com/arduino/arduino-cli/releases/download/v1.0.0/arduino-cli_1.0.0_Linux_64bit.tar.gz" | tar -C ${ACLI_DIR} -zxvf - arduino-cli 
+		chmod +x ${ACLI}
+		echo ""
+		echo ":: installing Arduino IDE packages with apt, please enter sudo password:"
+		sudo apt update 
+		sudo apt install arduino
+		echo ""
+		echo ":: Installing ESP8266 core for Arduino"
+		${ACLI_CMD} core install esp8266:esp8266
+		echo ":: Installing Arduino libraries"
+		for lib in ${!LIBS[@]}
+		do
+			echo "     - ${LIBS[$lib]}"
+		done
+		
+		for lib in ${!LIBS[@]}
+		do
+			${ACLI_CMD} lib install "${LIBS[$lib]}"
+		done
+		echo ""
+		echo ":: Setup build environment done! You can now build the firmware"
+		echo "   with: $0 build"
+
+		;;
 	b|build)
+		check_acli
 		echo "building firmware $VER $BUILD, target dir: $(pwd)/build/"
 		test -d build || mkdir build
 		echo "/* CanGrow_Version.h gets generated from cangrow.sh */
@@ -22,21 +73,23 @@ case $1 in
 const char* CanGrowVer = \"${VER}\";
 const char* CanGrowBuild = \"${BUILD}\";
 " > Arduino/CanGrow/CanGrow_Version.h
-		~/.local/bin/arduino-cli --no-color compile -b esp8266:esp8266:d1_mini_clone  "Arduino/CanGrow/CanGrow.ino" --output-dir build/ || exit 1
+		${ACLI_CMD} --no-color compile -b esp8266:esp8266:d1_mini_clone  "Arduino/CanGrow/CanGrow.ino" --output-dir build/ || exit 1
 		cp build/CanGrow.ino.bin build/CanGrow_v${VER}_${BUILD}.bin
 		;;
 	u|upload)
+		check_acli
 		echo "uploading to $TTY"
-		~/.local/bin/arduino-cli --no-color compile -v  -b esp8266:esp8266:d1_mini_clone -u -p $TTY  "Arduino/CanGrow/CanGrow.ino"
+		${ACLI_CMD} --no-color compile -v  -b esp8266:esp8266:d1_mini_clone -u -p $TTY  "Arduino/CanGrow/CanGrow.ino"
 		;;
 	w|webupload)
 		echo "uploading to $IP"
-		curl -v http://$IP/system/applyUpdate -X POST -H 'Content-Type: multipart/form-data' -F "image=@$(pwd)/build/CanGrow.ino.bin"
+		curl -v http://$IP/system/applyUpdate -X POST -H 'Content-Type: multipart/form-data' -F "file=@$(pwd)/build/CanGrow.ino.bin"
 		echo
 		;;	
 	m|mon|monitor)
+		check_acli
 		echo "open monitor $TTY"
-		~/.local/bin/arduino-cli monitor -c baudrate=115200 -p $TTY
+		${ACLI_CMD} monitor -c baudrate=115200 -p $TTY
 		;;
 	*)
 		help