CanGrow Firmware WIP

Arduino/CanGrow/CanGrow.ino

@@ -38,13 +38,17 @@
  * 
  */
 
-// When D4 is HIGH at start, WIPE is true and EEPROM get cleared
+// When D4 is LOW at start, WIPE is true and EEPROM get cleared
+// D4 hast to be shorted to GND withing the 2 sec delay in setup();
+// DO NOT PULL D4 DOWN AT START/POWER ON !!! BOOT WILL FAIL
 bool WIPE;
 
 /*
  * EEPROM variables
  */
  
+// Size of EEPROM 
+const uint8_t EEPROMsize = 512;
 bool configured;
 char WIFIssid[32];
 char WIFIpassword[64];
@@ -64,9 +68,9 @@ char WIFIpassword[64];
 const char *APssid = "CanGrow-unconfigured";
 const char *APpass = "CanGrow";
 
-IPAddress ip(192,168,4,20);
-IPAddress netmask(255,255,255,0);
-IPAddress gateway(192,168,4,254);
+IPAddress WIFIip(192,168,4,20);
+IPAddress WIFInetmask(255,255,255,0);
+IPAddress WIFIgateway(192,168,4,254);
 
 
 
@@ -335,6 +339,15 @@ int getLightchirp() {
   return lightchirp;
 }
 
+void wipeEEPROM() {
+ // write a 0 to all 512 bytes of the EEPROM
+ Serial.print("wiping EEPROM... ");
+ for (int i = 0; i < EEPROMsize; i++) { EEPROM.write(i, 0); }
+ Serial.println("DONE");
+ pinMode(PIN_WIPE, OUTPUT);
+ digitalWrite(PIN_WIPE, LOW);
+ delay(5000);
+}
 
 bool loadEEPROM() {
   // read var configured from Byte 0
@@ -344,11 +357,11 @@ bool loadEEPROM() {
   // read var WIFIpassword, 64 byte long  
   EEPROM.get(33, WIFIpassword);
   // read var ip, 16 byte long  
-  EEPROM.get(113, ip);
+  EEPROM.get(113, WIFIip);
   // read var netmask, 16 byte long  
-  EEPROM.get(129, netmask);
+  EEPROM.get(129, WIFInetmask);
   // read var gateway, 16 byte long  
-  EEPROM.get(145, gateway);
+  EEPROM.get(145, WIFIgateway);
   
   Serial.print("EEPROM loaded, CanGrow configured is: ");
   Serial.println(configured);
@@ -378,14 +391,11 @@ void setup() {
   digitalWrite(PINled, LOW);
   digitalWrite(PINpump, LOW);
 
-  // read status from PIN_WIPE to WIPE
-  WIPE = digitalRead(PIN_WIPE);
-
   // Start Serial
   Serial.begin(115200);
 
   // Start EEPROM
-  EEPROM.begin(512);
+  EEPROM.begin(EEPROMsize);
     
   // initialise Wire for I2C
   Wire.begin();
@@ -409,23 +419,52 @@ void setup() {
   // initialise DHT11
   dht.begin(); //TODO: Do only, when configured
 
-  WiFi.softAPConfig(ip, gateway, netmask);
+  WiFi.softAPConfig(WIFIip, WIFIgateway, WIFInetmask);
   WiFi.softAP(APssid);
   Serial.print("AP IP address: ");
   Serial.println(WiFi.softAPIP());
   
+  // load stored values from EEPROM
+  loadEEPROM();
+  
+  // wait a few seconds to let the user pull D4 down to wipe EEPROM
+  // and we can enjoy the boot screen meanwhile :p
+  delay(2000);
+  
+  // read status from PIN_WIPE to WIPE
+  WIPE = digitalRead(PIN_WIPE);
+  Serial.print("WIPE is ");
+  Serial.println(WIPE);
+  if( WIPE == 0 ) {
+    wipeEEPROM();
+  }
+  
   //
   // Webserver handlers   
   //
-  webserver.on("/", HTTP_GET, webRoot);
-//  server.onNotFound(handleNotFound);
-//  webserver.on("/save", HTTP_POST, handleSave);
-//  webserver.on("/control", HTTP_GET, handleControl);
+  
+  // when not configured, webroot is WEBrootAP
+  // nothing else configured
+  if(configured == true) {
+    webserver.on("/", HTTP_GET, WEBroot);
+  } else {
+    webserver.on("/", HTTP_GET, WEBrootAP);
+  }
+  
+  // generic handler 
+  webserver.on("/wifiConfig/save", HTTP_POST, POSTwifiConfig);
+  // 404 handling
+  //webserver.onNotFound(handleNotFound);
+
+  /*
+  webserver.on("/", HTTP_GET, WEBroot);
+  
+  webserver.on("/control", HTTP_GET, handleControl);
+  */
+  
+  
   webserver.begin();  
-  loadEEPROM();
-  Serial.print("WIPE is ");
-  Serial.println(WIPE);
-  delay(2000); //TODO: replace with millis()
+  
 }
 
 
@@ -447,7 +486,7 @@ void loop() {
  * 
  */
 
-void webRoot() {
+void WEBroot() {
   
   String body = FPSTR(HTMLheader);
   body += "<h1>configured!</h1>";
@@ -456,19 +495,48 @@ void webRoot() {
   webserver.send(200, "text/html", body);
 }  
   
-void webRootAP() {
+void WEBrootAP() {
   
   String body = FPSTR(HTMLheader);
   body += "<h1>unconfigured!</h1>";
+  body += "<h1>WiFi config</h1>";
+  body += "<form method='post' action='/wifiConfig/save'>";
+  body += "SSID: <input type='text' name='WIFIssid'><br>";
+  body += "Password: <input type='password' name='WIFIpassword'><br>";
+  body += "IP: <input type='text' name='WIFIip'><br>";
+  body += "Subnet mask: <input type='text' name='WIFInetmask'><br>";
+  body += "gateway: <input type='text' name='WIFIgateway'><br>";
+  body += "<input type='submit' value='Save'>";
+  body += "</form>";
   body += FPSTR(HTMLfooter);
   
   webserver.send(200, "text/html", body);
 }    
   
   
+/*
+ * 
+ * POSTs
+ * 
+ */  
   
+void POSTwifiConfig() {
+  String WIFIssid_new = webserver.arg("WIFIssid");
+  String WIFIpassword_new = webserver.arg("WIFIpassword");
+  String WIFIip_new = webserver.arg("WIFIip");
+  String WIFInetmask_new = webserver.arg("WIFInetmask");
+  String WIFIgateway_new = webserver.arg("WIFIgateway");
   
+  WIFIssid_new.toCharArray(WIFIssid, 32);
+  WIFIpassword_new.toCharArray(WIFIpassword, 64);
   
+  WIFIip.fromString(WIFIip_new);
+  WIFInetmask.fromString(WIFInetmask_new);
+  WIFIgateway.fromString(WIFIgateway_new);
+  EEPROM.put(0, 1);
+  EEPROM.commit();
+  webserver.send(200, "text/html", "wifiConfig saved, please restart");
+}