firmware wip - rename PIN variables to a more equal naming schema
This commit is contained in:
parent
ee5be296ec
commit
54b551f3df
|
|
@ -325,7 +325,7 @@ function convertDateToEpoch(src, dst) {
|
|||
* D0 - MOSFET Pump
|
||||
* D1, D2 - I2C
|
||||
* D3 - DHT11
|
||||
* D4 - PIN_WIPE
|
||||
* D4 - PinWIPE
|
||||
* D5 - MOSFET Fan
|
||||
* D6 - MOSFET Grow LED, PWM
|
||||
* D7 - waterlevel (set HIGH to read value)
|
||||
|
|
@ -342,7 +342,7 @@ const uint8_t PINdht = D3;
|
|||
// D4 is HIGH at boot, boot fail if pulled to LOW
|
||||
// During Start Screen you can pull D4 to LOW to wipe saved data in EEPROM
|
||||
// DO NOT PULL D4 DOWN AT WHEN POWERING ON !!! BOOT WILL FAIL
|
||||
const uint8_t PIN_WIPE = D4;
|
||||
const uint8_t PinWIPE = D4;
|
||||
const uint8_t PinFAN = D5;
|
||||
const uint8_t PinLED = D6; //
|
||||
const uint8_t PINwaterlevel = D7;
|
||||
|
|
@ -593,14 +593,14 @@ void wipeEEPROM() {
|
|||
// wipeMsg is helper variable to know if the Serial.print Message was
|
||||
// already sent
|
||||
byte wipeMsg = 0;
|
||||
while(digitalRead(PIN_WIPE) == LOW ) {
|
||||
while(digitalRead(PinWIPE) == LOW ) {
|
||||
// only show the Serial message once
|
||||
if(wipeMsg == 0) {
|
||||
Serial.println("Please release PIN_WIPE to erase all data saved in EEPROM");
|
||||
Serial.println("Please release PinWIPE to erase all data saved in EEPROM");
|
||||
Serial.println("LAST CHANCE TO KEEP THE DATA BY RESETTING NOW!!");
|
||||
|
||||
display.setCursor(0,36);
|
||||
display.println("RELEASE PIN_WIPE");
|
||||
display.println("RELEASE PinWIPE");
|
||||
display.println("TO WIPE EEPROM");
|
||||
display.display();
|
||||
|
||||
|
|
@ -623,18 +623,18 @@ void wipeEEPROM() {
|
|||
|
||||
Serial.println("DONE");
|
||||
|
||||
// set D4 PIN_WIPE internal LED to Output to give feedback WIPE
|
||||
// set D4 PinWIPE internal LED to Output to give feedback WIPE
|
||||
// was done
|
||||
pinMode(PIN_WIPE, OUTPUT);
|
||||
pinMode(PinWIPE, OUTPUT);
|
||||
|
||||
Serial.println("!! Device will restart in 3 seconds !!");
|
||||
|
||||
// let the internal led blink fast to signalize wipe is done
|
||||
for(byte i = 0; i <= 24 ; i++) {
|
||||
if(i % 2) {
|
||||
digitalWrite(PIN_WIPE, LOW);
|
||||
digitalWrite(PinWIPE, LOW);
|
||||
} else {
|
||||
digitalWrite(PIN_WIPE, HIGH);
|
||||
digitalWrite(PinWIPE, HIGH);
|
||||
}
|
||||
delay(125);
|
||||
}
|
||||
|
|
@ -1038,9 +1038,7 @@ void refreshSensors() {
|
|||
*
|
||||
*/
|
||||
void setup() {
|
||||
// Start EEPROM
|
||||
EEPROM.begin(512);
|
||||
|
||||
|
||||
// setup pins
|
||||
pinMode(PinFAN, OUTPUT);
|
||||
pinMode(PINdht, INPUT);
|
||||
|
|
@ -1048,7 +1046,7 @@ void setup() {
|
|||
pinMode(PINsoilmoisture, OUTPUT);
|
||||
pinMode(PinLED, OUTPUT);
|
||||
pinMode(PinPUMP, OUTPUT);
|
||||
pinMode(PIN_WIPE, OUTPUT);
|
||||
pinMode(PinWIPE, OUTPUT);
|
||||
|
||||
|
||||
// set all OUTPUT to low
|
||||
|
|
@ -1063,12 +1061,14 @@ void setup() {
|
|||
// 220Hz is note A3 btw.
|
||||
analogWriteFreq(220);
|
||||
|
||||
// Start EEPROM
|
||||
EEPROM.begin(512);
|
||||
|
||||
// Start Serial
|
||||
Serial.begin(115200);
|
||||
|
||||
// Write a line before doing serious output, because before there is some garbage in serial
|
||||
// whats get the cursor somewhere over the place
|
||||
// output
|
||||
Serial.println("420");
|
||||
Serial.println(".:: CanGrow Start ::.");
|
||||
|
||||
|
|
@ -1076,7 +1076,7 @@ void setup() {
|
|||
Wire.begin();
|
||||
|
||||
// initialise I2C display
|
||||
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x32
|
||||
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Address 0x3C for 128x64
|
||||
display.clearDisplay();
|
||||
display.display();
|
||||
|
||||
|
|
@ -1094,7 +1094,7 @@ void setup() {
|
|||
// initialise DHT11
|
||||
dht.begin(); //TODO: Do only, when configured
|
||||
|
||||
Serial.println("To wipe the EEPROM saved data, set D4 (PIN_WIPE) to LOW - NOW! (2 seconds left)");
|
||||
Serial.println("To wipe the EEPROM saved data, set D4 (PinWIPE) to LOW - NOW! (2 seconds left)");
|
||||
// wait a few seconds to let the user pull D4 down to wipe EEPROM
|
||||
// and we can enjoy the boot screen meanwhile :p
|
||||
// meanwhile blink with the led onboad :)
|
||||
|
|
@ -1103,24 +1103,25 @@ void setup() {
|
|||
display.fillRect(0,36,128,64-36, 0);
|
||||
display.setCursor(0,36);
|
||||
display.println("To wipe EEPROM pull");
|
||||
display.println("D4 (PIN_WIPE) to GND");
|
||||
display.println("D4 (PinWIPE) to GND");
|
||||
display.display();
|
||||
|
||||
|
||||
// blink with the onboard LED on D4 (PinWIPE)
|
||||
for(byte i = 0; i <= 6 ; i++) {
|
||||
if(i % 2) {
|
||||
digitalWrite(PIN_WIPE, LOW);
|
||||
digitalWrite(PinWIPE, LOW);
|
||||
} else {
|
||||
digitalWrite(PIN_WIPE, HIGH);
|
||||
digitalWrite(PinWIPE, HIGH);
|
||||
}
|
||||
delay(333);
|
||||
}
|
||||
// set back to HIGH because thats the default
|
||||
digitalWrite(PIN_WIPE, HIGH);
|
||||
digitalWrite(PinWIPE, HIGH);
|
||||
//delay(2000);
|
||||
|
||||
// read status from PIN_WIPE to WIPE
|
||||
// when PIN_WIPE is set to LOW, wipe EEPROM
|
||||
if(digitalRead(PIN_WIPE) == LOW) {
|
||||
// read status from PinWIPE to WIPE
|
||||
// when PinWIPE is set to LOW, wipe EEPROM
|
||||
if(digitalRead(PinWIPE) == LOW) {
|
||||
// wipe EEPROM
|
||||
wipeEEPROM();
|
||||
}
|
||||
|
|
@ -1190,12 +1191,17 @@ void loop() {
|
|||
// current time gets previous time for new interval
|
||||
outputPrevTime = currentRuntime;
|
||||
}
|
||||
|
||||
|
||||
//delay(1000);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
*
|
||||
*
|
||||
* Web related stuff
|
||||
*
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* Web Handler
|
||||
*/
|
||||
|
|
@ -1241,7 +1247,7 @@ void WebHandler() {
|
|||
// favicon.ico is a special one, because its requested everytime and i dont wont to deliver the
|
||||
// failed whole page every call. we can save up this 0,5kb traffic :o)
|
||||
webserver.on("/favicon.ico", [](){ webserver.send(404, "text/html", "404 - not found"); });
|
||||
webserver.onNotFound(WEB404);
|
||||
webserver.onNotFound(Sys404);
|
||||
|
||||
// switching MOSFETs
|
||||
webserver.on("/switch", HTTP_POST, POSTsetOutput);
|
||||
|
|
@ -1371,6 +1377,13 @@ String returnStrDateFromEpoch(unsigned long epochTime) {
|
|||
return dateStr;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
*
|
||||
* System pages like infos, errors
|
||||
*
|
||||
*/
|
||||
|
||||
void SysRestart() {
|
||||
String body = returnHTMLheader();
|
||||
// TODO only debug and development solution, remove this later
|
||||
|
|
@ -1414,6 +1427,22 @@ void SysWipe() {
|
|||
}
|
||||
}
|
||||
|
||||
void Sys404() {
|
||||
String body = returnHTMLheader();
|
||||
body += "<div class='warnmsg'><h1>404 - not found</h1></div>";
|
||||
body += FPSTR(HTMLfooter);
|
||||
webserver.send(404, "text/html", body);
|
||||
}
|
||||
|
||||
void Syslogout() {
|
||||
String body = returnHTMLheader();
|
||||
body += "<h1>you are logged out.</h1>";
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
// TODO does not work atm
|
||||
webserver.send(401, "text/html", body);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TODO
|
||||
|
|
@ -1448,35 +1477,12 @@ void SysWipe() {
|
|||
|
||||
/*
|
||||
*
|
||||
* Web pages
|
||||
* Main UI pages
|
||||
*
|
||||
*/
|
||||
|
||||
void WEB404() {
|
||||
String body = returnHTMLheader();
|
||||
body += "<div class='warnmsg'><h1>404 - not found</h1></div>";
|
||||
body += FPSTR(HTMLfooter);
|
||||
webserver.send(404, "text/html", body);
|
||||
}
|
||||
|
||||
void WEBlogout() {
|
||||
String body = returnHTMLheader();
|
||||
body += "<h1>you are logged out.</h1>";
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
// TODO does not work atm
|
||||
webserver.send(401, "text/html", body);
|
||||
}
|
||||
|
||||
void WEBhelp() {
|
||||
String body = returnHTMLheader("help");
|
||||
body += FPSTR(HTMLhelp);
|
||||
body += FPSTR(HTMLfooter);
|
||||
webserver.send(200, "text/html", body);
|
||||
}
|
||||
|
||||
/*
|
||||
* Root pages
|
||||
* Root page
|
||||
*/
|
||||
|
||||
void WEBroot() {
|
||||
|
|
@ -1497,19 +1503,19 @@ void WEBroot() {
|
|||
body += "</h1>";
|
||||
body += "Grow started: ";
|
||||
body += returnStrDateFromEpoch(GrowStart);
|
||||
body += "<br>";
|
||||
body += "<br>\n";
|
||||
body += "Day of Grow: ";
|
||||
body += DayOfGrow;
|
||||
body += "<br>";
|
||||
body += DayOfGrow;
|
||||
body += "<br>\n";
|
||||
body += "Soil Moisture: ";
|
||||
body += valSoilmoisture;
|
||||
body += " %<br>";
|
||||
body += " %<br>\n";
|
||||
body += "Humidity: ";
|
||||
body += valHumidity;
|
||||
body += " %<br>";
|
||||
body += " %<br>\n";
|
||||
body += "Temperature: ";
|
||||
body += valTemperature;
|
||||
body += " °C<br>";
|
||||
body += " °C<br>\n";
|
||||
if(UsePump == true) {
|
||||
body += "Pump water level: ";
|
||||
switch(getWaterlevel()) {
|
||||
|
|
@ -1524,11 +1530,11 @@ void WEBroot() {
|
|||
break;
|
||||
}
|
||||
}
|
||||
body += "<br>";
|
||||
body += "<br>\n";
|
||||
body += "Growlight brightnes: ";
|
||||
body += ((PinLEDPWM * 100) / 255);
|
||||
body += " %<br>";
|
||||
body += "<form method='post' action='/switch'>";
|
||||
body += " %<br>\n";
|
||||
body += "<form method='post' action='/switch'>\n";
|
||||
body += "MOSFET<select id='output' name='output' required>\n";
|
||||
body += "<option disabled value='' selected hidden>---</option>\n";
|
||||
body += "<option value='1'>LED</option>\n";
|
||||
|
|
@ -1546,11 +1552,7 @@ void WEBroot() {
|
|||
|
||||
body += "<input type='submit' value='Save'>\n";
|
||||
body += "</form>";
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
webserver.send(200, "text/html", body);
|
||||
|
|
@ -1558,74 +1560,111 @@ void WEBroot() {
|
|||
}
|
||||
|
||||
/*
|
||||
* Config pages
|
||||
*
|
||||
* settings pages
|
||||
*
|
||||
*
|
||||
*/
|
||||
|
||||
void WEBwifiSettings() {
|
||||
byte ssidsAvail = WiFi.scanNetworks();
|
||||
String body = returnHTMLheader("wifiSettings");
|
||||
if(FirstRun == true) {
|
||||
body += "<h1>Welcome!</h1>";
|
||||
body += "<p>CanGrow is actually unconfigured. You need to Setup your WiFi first down below.<br>";
|
||||
body += "<br>After you entered your WiFi connection details, you need to restart and are step closer to your grow 🥦";
|
||||
body += "<br>";
|
||||
/*
|
||||
* Grow page
|
||||
*/
|
||||
void WEBgrowSettings() {
|
||||
// if system settings are unconfigured, we cannot proceed with growSettings
|
||||
if(configured == false) {
|
||||
webserver.sendHeader("Location", String("/systemSettings"), true);
|
||||
webserver.send(302, "text/plain", "please configure systemSettings first");
|
||||
} else {
|
||||
|
||||
String body = returnHTMLheader("growSettings");
|
||||
|
||||
if(strlen(GrowName) < 1) {
|
||||
body += "<h1>Final step: Grow settings</h1>";
|
||||
body += "<p>Please configure all settings<br>";
|
||||
body += "</p>";
|
||||
GrowStart = timeClient.getEpochTime();
|
||||
}
|
||||
|
||||
body += "<h2>Grow Settings</h2>";
|
||||
if(webserver.hasArg("success")) {
|
||||
body += FPSTR(HTMLsuccess);
|
||||
}
|
||||
body += "<p>Here you can set everything grow related, like light hours, how much water, LED brightness<br>";
|
||||
body += "</p>";
|
||||
}
|
||||
body += "<h2>WiFi config</h2>\n";
|
||||
if(NeedRestart == true) {
|
||||
body += FPSTR(HTMLneedRestart);
|
||||
}
|
||||
if(webserver.hasArg("success")) {
|
||||
body += FPSTR(HTMLsuccess);
|
||||
}
|
||||
|
||||
body += "<form method='post' action='/growSettings/save'>\n";
|
||||
|
||||
|
||||
if(FirstRun == false) {
|
||||
body += "<u>Current Settings:</u><br>";
|
||||
body += "WiFi SSID: <b>";
|
||||
body += WIFIssid;
|
||||
body += "</b><br>\n";
|
||||
body += "Use DHCP: <b>";
|
||||
body += WIFIuseDHCP;
|
||||
body += "</b><br>\n";
|
||||
body += "IP address: <b>";
|
||||
body += WiFi.localIP().toString();
|
||||
body += "</b><br>\n";
|
||||
body += "Subnet mask: <b>";
|
||||
body += WiFi.subnetMask().toString();
|
||||
body += "</b><br>\n";
|
||||
body += "Gateway: <b>";
|
||||
body += WiFi.gatewayIP().toString();
|
||||
body += "</b><br>\n";
|
||||
body += "DNS: <b>";
|
||||
body += WiFi.dnsIP().toString();
|
||||
body += "</b><br><br>\n";
|
||||
|
||||
body += "Grow name: <input type='text' name='GrowName' maxlength='32' value='";
|
||||
body += GrowName;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
|
||||
// the input field, which calls javascript convertDateToEpoch() to write data to transmit to id GrowStart
|
||||
body += "Grow start date: <input type='date' id='GrowStart_sel' onChange='convertDateToEpoch(\"GrowStart_sel\", \"GrowStart\");' value='";
|
||||
body += returnStrDateFromEpoch(GrowStart);
|
||||
body += "' required><br>\n";
|
||||
|
||||
body += "<input type='hidden' id='GrowStart' name='GrowStart' value='";
|
||||
body += GrowStart;
|
||||
body+= "' required>\n";
|
||||
|
||||
|
||||
|
||||
body += "Days of vegetation: <input type='number' name='DaysVeg' min='0' max='255' value='";
|
||||
body += DaysVeg;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Days of bloom: <input type='number' name='DaysBloom' min='0' max='255' value='";
|
||||
body += DaysBloom;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Hours light on vegetation: <input type='number' name='LighthoursVeg' min='0' max='255' value='";
|
||||
body += LighthoursVeg;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Hours light on bloom: <input type='number' name='LighthoursBloom' min='0' max='255' value='";
|
||||
body += LighthoursBloom;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Sunrise: <input class='inputShort' type='number' name='SunriseHour' min='0' max='23' value='";
|
||||
body += SunriseHour;
|
||||
body+= "' required>\n";
|
||||
body += " <b>:</b> <input class='inputShort' type='number' name='SunriseMinute' min='0' max='59' value='";
|
||||
body += SunriseMinute;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
// SunFade bool
|
||||
body += "Fade LED on Sunrise/Sunset?: <select id='SunFade' name='SunFade' required>\n";
|
||||
body += "<option value='1'" + returnStrSelected(SunFade, 1) + ">Yes</option>\n";
|
||||
body += "<option value='0'" + returnStrSelected(SunFade, 0) + ">No</option>\n";
|
||||
body += "</select><br>\n";
|
||||
|
||||
body += "Fading duration (minutes): <input type='number' name='SunFadeDuration' min='1' max='255' value='";
|
||||
body += SunFadeDuration;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
if(UseLEDrelais == false) {
|
||||
body += "Brightness LED: <input type='range' id='PinLEDPWM' name='PinLEDPWM' min='1' max='255' value='";
|
||||
body += PinLEDPWM;
|
||||
body += "'/><br>\n";
|
||||
}
|
||||
|
||||
if(UseFANrelais == false) {
|
||||
body += "Speed FAN: <input type='range' id='PinFANPWM' name='PinFANPWM' min='1' max='255' value='";
|
||||
body += PinFANPWM;
|
||||
body += "'/><br>\n";
|
||||
}
|
||||
|
||||
body += "<input type='submit' value='Save'>\n";
|
||||
body += "</form>\n";
|
||||
body += FPSTR(JSconvertDateToEpoch);
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
webserver.send(200, "text/html", body);
|
||||
}
|
||||
|
||||
body += "<p>Select your wifi network from the SSID list.<br>To use DHCP leave IP, Subnet, Gateway and DNS fields blank!</p>";
|
||||
body += "<form method='post' action='/wifiSettings/save'>\n";
|
||||
body += "SSID: <select id='WIFIssid' name='WIFIssid' required>\n";
|
||||
body += "<option disabled value='' selected hidden>-Select your network-</option>";
|
||||
|
||||
// build option list for selecting wifi
|
||||
Serial.println("Available Wifis: ");
|
||||
for(int i = 0 ; i < ssidsAvail; i++) {
|
||||
String wifiName = WiFi.SSID(i);
|
||||
Serial.println(wifiName);
|
||||
body += "<option value='" + wifiName + "'>";
|
||||
body += wifiName + "</option>\n";
|
||||
}
|
||||
body += "</select><br>\n";
|
||||
body += "Password: <input type='password' name='WIFIpassword'><br>\n";
|
||||
body += "IP: <input type='text' name='WIFIip'><br>\n";
|
||||
body += "Subnet mask: <input type='text' name='WIFInetmask'><br>\n";
|
||||
body += "Gateway: <input type='text' name='WIFIgateway'><br>\n";
|
||||
body += "DNS: <input type='text' name='WIFIdns'><br>\n";
|
||||
body += "<input type='submit' value='Save'>\n";
|
||||
body += "</form>\n";
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
webserver.send(200, "text/html", body);
|
||||
}
|
||||
}
|
||||
|
||||
void WEBsystemSettings() {
|
||||
// if wifi settings are unconfigured, we cannot proceed with systemSettings
|
||||
|
|
@ -1723,104 +1762,77 @@ void WEBsystemSettings() {
|
|||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Grow pages
|
||||
*/
|
||||
void WEBgrowSettings() {
|
||||
// if system settings are unconfigured, we cannot proceed with growSettings
|
||||
if(configured == false) {
|
||||
webserver.sendHeader("Location", String("/systemSettings"), true);
|
||||
webserver.send(302, "text/plain", "please configure systemSettings first");
|
||||
} else {
|
||||
|
||||
String body = returnHTMLheader("growSettings");
|
||||
|
||||
if(strlen(GrowName) < 1) {
|
||||
body += "<h1>Final step: Grow settings</h1>";
|
||||
body += "<p>Please configure all settings<br>";
|
||||
body += "</p>";
|
||||
GrowStart = timeClient.getEpochTime();
|
||||
}
|
||||
|
||||
body += "<h2>Grow Settings</h2>";
|
||||
if(webserver.hasArg("success")) {
|
||||
body += FPSTR(HTMLsuccess);
|
||||
}
|
||||
body += "<p>Here you can set everything grow related, like light hours, how much water, LED brightness<br>";
|
||||
void WEBwifiSettings() {
|
||||
byte ssidsAvail = WiFi.scanNetworks();
|
||||
String body = returnHTMLheader("wifiSettings");
|
||||
if(FirstRun == true) {
|
||||
body += "<h1>Welcome!</h1>";
|
||||
body += "<p>CanGrow is actually unconfigured. You need to Setup your WiFi first down below.<br>";
|
||||
body += "<br>After you entered your WiFi connection details, you need to restart and are step closer to your grow 🥦";
|
||||
body += "<br>";
|
||||
body += "</p>";
|
||||
|
||||
body += "<form method='post' action='/growSettings/save'>\n";
|
||||
|
||||
|
||||
|
||||
body += "Grow name: <input type='text' name='GrowName' maxlength='32' value='";
|
||||
body += GrowName;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
|
||||
// the input field, which calls javascript convertDateToEpoch() to write data to transmit to id GrowStart
|
||||
body += "Grow start date: <input type='date' id='GrowStart_sel' onChange='convertDateToEpoch(\"GrowStart_sel\", \"GrowStart\");' value='";
|
||||
body += returnStrDateFromEpoch(GrowStart);
|
||||
body += "' required><br>\n";
|
||||
|
||||
body += "<input type='hidden' id='GrowStart' name='GrowStart' value='";
|
||||
body += GrowStart;
|
||||
body+= "' required>\n";
|
||||
|
||||
|
||||
|
||||
body += "Days of vegetation: <input type='number' name='DaysVeg' min='0' max='255' value='";
|
||||
body += DaysVeg;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Days of bloom: <input type='number' name='DaysBloom' min='0' max='255' value='";
|
||||
body += DaysBloom;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Hours light on vegetation: <input type='number' name='LighthoursVeg' min='0' max='255' value='";
|
||||
body += LighthoursVeg;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Hours light on bloom: <input type='number' name='LighthoursBloom' min='0' max='255' value='";
|
||||
body += LighthoursBloom;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
body += "Sunrise: <input class='inputShort' type='number' name='SunriseHour' min='0' max='23' value='";
|
||||
body += SunriseHour;
|
||||
body+= "' required>\n";
|
||||
body += " <b>:</b> <input class='inputShort' type='number' name='SunriseMinute' min='0' max='59' value='";
|
||||
body += SunriseMinute;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
// SunFade bool
|
||||
body += "Fade in and out LED?: <select id='SunFade' name='SunFade' required>\n";
|
||||
body += "<option value='1'" + returnStrSelected(SunFade, 1) + ">Yes</option>\n";
|
||||
body += "<option value='0'" + returnStrSelected(SunFade, 0) + ">No</option>\n";
|
||||
body += "</select><br>\n";
|
||||
|
||||
body += "Fading duration (minutes): <input type='number' name='SunFadeDuration' min='1' max='255' value='";
|
||||
body += SunFadeDuration;
|
||||
body+= "' required><br>\n";
|
||||
|
||||
if(UseLEDrelais == false) {
|
||||
body += "Brightness LED: <input type='range' id='PinLEDPWM' name='PinLEDPWM' min='1' max='255' value='";
|
||||
body += PinLEDPWM;
|
||||
body += "'/><br>\n";
|
||||
}
|
||||
|
||||
if(UseFANrelais == false) {
|
||||
body += "Speed FAN: <input type='range' id='PinFANPWM' name='PinFANPWM' min='1' max='255' value='";
|
||||
body += PinFANPWM;
|
||||
body += "'/><br>\n";
|
||||
}
|
||||
|
||||
body += "<input type='submit' value='Save'>\n";
|
||||
body += "</form>\n";
|
||||
body += FPSTR(JSconvertDateToEpoch);
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
webserver.send(200, "text/html", body);
|
||||
}
|
||||
body += "<h2>WiFi config</h2>\n";
|
||||
if(NeedRestart == true) {
|
||||
body += FPSTR(HTMLneedRestart);
|
||||
}
|
||||
if(webserver.hasArg("success")) {
|
||||
body += FPSTR(HTMLsuccess);
|
||||
}
|
||||
|
||||
if(FirstRun == false) {
|
||||
body += "<u>Current Settings:</u><br>";
|
||||
body += "WiFi SSID: <b>";
|
||||
body += WIFIssid;
|
||||
body += "</b><br>\n";
|
||||
body += "Use DHCP: <b>";
|
||||
body += WIFIuseDHCP;
|
||||
body += "</b><br>\n";
|
||||
body += "IP address: <b>";
|
||||
body += WiFi.localIP().toString();
|
||||
body += "</b><br>\n";
|
||||
body += "Subnet mask: <b>";
|
||||
body += WiFi.subnetMask().toString();
|
||||
body += "</b><br>\n";
|
||||
body += "Gateway: <b>";
|
||||
body += WiFi.gatewayIP().toString();
|
||||
body += "</b><br>\n";
|
||||
body += "DNS: <b>";
|
||||
body += WiFi.dnsIP().toString();
|
||||
body += "</b><br><br>\n";
|
||||
}
|
||||
|
||||
body += "<p>Select your wifi network from the SSID list.<br>To use DHCP leave IP, Subnet, Gateway and DNS fields blank!</p>";
|
||||
body += "<form method='post' action='/wifiSettings/save'>\n";
|
||||
body += "SSID: <select id='WIFIssid' name='WIFIssid' required>\n";
|
||||
body += "<option disabled value='' selected hidden>-Select your network-</option>";
|
||||
|
||||
// build option list for selecting wifi
|
||||
Serial.println("Available Wifis: ");
|
||||
for(int i = 0 ; i < ssidsAvail; i++) {
|
||||
String wifiName = WiFi.SSID(i);
|
||||
Serial.println(wifiName);
|
||||
body += "<option value='" + wifiName + "'>";
|
||||
body += wifiName + "</option>\n";
|
||||
}
|
||||
body += "</select><br>\n";
|
||||
body += "Password: <input type='password' name='WIFIpassword'><br>\n";
|
||||
body += "IP: <input type='text' name='WIFIip'><br>\n";
|
||||
body += "Subnet mask: <input type='text' name='WIFInetmask'><br>\n";
|
||||
body += "Gateway: <input type='text' name='WIFIgateway'><br>\n";
|
||||
body += "DNS: <input type='text' name='WIFIdns'><br>\n";
|
||||
body += "<input type='submit' value='Save'>\n";
|
||||
body += "</form>\n";
|
||||
body += FPSTR(HTMLfooter);
|
||||
|
||||
webserver.send(200, "text/html", body);
|
||||
}
|
||||
|
||||
void WEBhelp() {
|
||||
String body = returnHTMLheader("help");
|
||||
body += FPSTR(HTMLhelp);
|
||||
body += FPSTR(HTMLfooter);
|
||||
webserver.send(200, "text/html", body);
|
||||
}
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue