PCB v0.4

my MOSFET driver circuit wasnt a driver circuit. It was something else,
but not a driver circuit, LOL :D

I am using now this: https://en.wikipedia.org/wiki/File:MOSFET_Driver_Circuit.jpg

In simulation it works so far fine.

Arduino/CanGrow/CanGrow.ino

@@ -16,6 +16,10 @@
  * D4 and D7 cannot be HIGH at the same time!
  */
 
+/*
+ * Includes
+ * 
+ */
 
 #include <SPI.h>
 #include <Wire.h>
@@ -23,6 +27,23 @@
 #include <Adafruit_SSD1306.h>
 #include "DHT.h"
 
+/*
+ * millis timer
+ * 
+ */
+unsigned long outputPrevTime = 0;
+
+
+/*
+ * Status vars
+ * 
+ */
+int D6status = false;
+
+/*
+ * Pin assignments
+ * 
+ */
 // D0 is HIGH at boot, no PWM
 uint8_t PINfan = D0;
 // If D3 is pulled to LOW, boot fails
@@ -34,12 +55,21 @@ uint8_t PINwaterlevel = D7;
 uint8_t PINsoilmoisture = D8;
 uint8_t PINanalog = A0;
 
-int D6status = false;
+/* I2C Stuff 
-
+ *  
-
+*/
 #define WIRE Wire
-#define DHTTYPE DHT11
 
+
+/* DHT Stuff
+ *  
+*/
+#define DHTTYPE DHT11
+DHT dht(PINdht, DHTTYPE); 
+
+/* Display Stuff
+ * 
+ */
 Adafruit_SSD1306 display = Adafruit_SSD1306(128, 32, &WIRE);
 // 'CanGrow_Logo', 128x32px
 const unsigned char bmpCanGrow_Logo [] PROGMEM = {
@@ -83,7 +113,11 @@ const unsigned char* bmpallArray[1] = {
   bmpCanGrow_Logo
 };
 
-DHT dht(PINdht, DHTTYPE); 
+
+/*
+ * Functions
+ * 
+ */
 
 void writeI2CRegister8bit(int addr, int value) {
   Wire.beginTransmission(addr);
@@ -215,6 +249,11 @@ int getLightchirp() {
   return lightchirp;
 }
 
+
+/*
+ * Setup
+ * 
+ */
 void setup() {
   // setup pins
   pinMode(PINfan, OUTPUT);
@@ -265,7 +304,15 @@ void setup() {
   
 }
 
+
+/*
+ * Loop
+ * 
+ */
 void loop() {
+  
+  unsigned long currentTime = millis();
+  
   int valSoilmoisture0 = getSoilmoisture(0);
   int valSoilmoisture1 = getSoilmoisture(1);
 
@@ -276,6 +323,32 @@ void loop() {
   
   int valWaterlevel = getWaterlevel();
 
+  switch(valWaterlevel) {
+
+    case 0:
+      digitalWrite(PINled, HIGH);  
+      digitalWrite(PINpump, LOW);
+      digitalWrite(PINfan, LOW);
+      break;
+    case 1:
+      digitalWrite(PINled, LOW);
+      digitalWrite(PINpump, HIGH);
+      digitalWrite(PINfan, LOW);
+      break;
+    case 2:
+      digitalWrite(PINled, LOW);
+      digitalWrite(PINpump, LOW);
+      digitalWrite(PINfan, HIGH);
+      break;
+      
+  }
+
+
+  /*
+   * Output
+   */
+  if(currentTime - outputPrevTime >= 1000) {
+    
   
   // set display cursor to top left
   display.setCursor(0,0);
@@ -320,26 +393,10 @@ void loop() {
   
   Serial.println("Test");
 
-  switch(valWaterlevel) {
+  outputPrevTime = currentTime;
-
-    case 0:
-      digitalWrite(PINled, HIGH);  
-      digitalWrite(PINpump, LOW);
-      digitalWrite(PINfan, LOW);
-      break;
-    case 1:
-      digitalWrite(PINled, LOW);
-      digitalWrite(PINpump, HIGH);
-      digitalWrite(PINfan, LOW);
-      break;
-    case 2:
-      digitalWrite(PINled, LOW);
-      digitalWrite(PINpump, LOW);
-      digitalWrite(PINfan, HIGH);
-      break;
-      
   }
   
+  
 /*  if(D6status == true) {
     digitalWrite(PINled, LOW);
     digitalWrite(PINpump, LOW);
@@ -358,17 +415,17 @@ void loop() {
 /*
   for(int dutyCycle = 0; dutyCycle < 255; dutyCycle++){   
     // changing the LED brightness with PWM
-    analogWrite(D4, dutyCycle);
+    analogWrite(PINled, dutyCycle);
     delay(1);
   }
 
   // decrease the LED brightness
   for(int dutyCycle = 255; dutyCycle > 0; dutyCycle--){
     // changing the LED brightness with PWM
-    analogWrite(D4, dutyCycle);
+    analogWrite(PINled, dutyCycle);
     delay(1);
   }
 */
 
-  delay(800);
+  
 }

KiCad/CanGrow/CanGrow.kicad_prl

@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 31,
+    "active_layer": 0,
     "active_layer_preset": "All Layers",
     "auto_track_width": true,
     "hidden_netclasses": [],

KiCad/CanGrow/gerber/CanGrow-B_Mask.gbs

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*
-G04 #@! TF.CreationDate,2024-04-08T19:06:54+02:00*
+G04 #@! TF.CreationDate,2024-04-09T13:44:03+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:54*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:03*
 %MOMM*%
 %LPD*%
 G01*
@@ -29,98 +29,136 @@ G04 Aperture macros list*
 20,1,$1+$1,$6,$7,$8,$9,0*
 20,1,$1+$1,$8,$9,$2,$3,0*%
 G04 Aperture macros list end*
-%ADD10R,1.500000X1.500000*%
+%ADD10R,1.100000X1.800000*%
-%ADD11C,1.500000*%
+%ADD11RoundRect,0.275000X0.275000X0.625000X-0.275000X0.625000X-0.275000X-0.625000X0.275000X-0.625000X0*%
-%ADD12C,1.600000*%
+%ADD12RoundRect,0.275000X-0.275000X-0.625000X0.275000X-0.625000X0.275000X0.625000X-0.275000X0.625000X0*%
-%ADD13O,1.600000X1.600000*%
+%ADD13C,1.600000*%
-%ADD14R,2.000000X1.905000*%
+%ADD14O,1.600000X1.600000*%
-%ADD15O,2.000000X1.905000*%
+%ADD15R,2.000000X1.905000*%
-%ADD16RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
+%ADD16O,2.000000X1.905000*%
-%ADD17R,1.800000X1.800000*%
+%ADD17RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
-%ADD18C,1.800000*%
+%ADD18R,1.800000X1.800000*%
-%ADD19RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
+%ADD19C,1.800000*%
-%ADD20C,6.000000*%
+%ADD20RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
-%ADD21R,2.000000X2.000000*%
+%ADD21C,6.000000*%
-%ADD22O,2.000000X1.600000*%
+%ADD22R,2.000000X2.000000*%
-%ADD23R,1.700000X1.700000*%
+%ADD23O,2.000000X1.600000*%
-%ADD24O,1.700000X1.700000*%
+%ADD24R,1.700000X1.700000*%
-%ADD25O,1.800000X1.800000*%
+%ADD25O,1.700000X1.700000*%
-%ADD26C,2.000000*%
+%ADD26O,1.800000X1.800000*%
+%ADD27C,2.000000*%
+%ADD28R,1.500000X1.500000*%
+%ADD29C,1.500000*%
+%ADD30O,1.905000X2.000000*%
+%ADD31R,1.905000X2.000000*%
 G04 APERTURE END LIST*
 D10*
-X122000000Y-49000000D03*
+X129750000Y-46850000D03*
 D11*
-X119460000Y-46460000D03*
+X128480000Y-48920000D03*
-X122000000Y-43920000D03*
+X127210000Y-46850000D03*
+D10*
+X133480000Y-48670000D03*
 D12*
-X106760000Y-46000000D03*
+X134750000Y-46600000D03*
+X136020000Y-48670000D03*
+D10*
+X129790000Y-67850000D03*
+D11*
+X128520000Y-69920000D03*
+X127250000Y-67850000D03*
+D10*
+X133500000Y-69670000D03*
+D12*
+X134770000Y-67600000D03*
+X136040000Y-69670000D03*
+D10*
+X129770000Y-88850000D03*
+D11*
+X128500000Y-90920000D03*
+X127230000Y-88850000D03*
+D12*
+X136020000Y-90650000D03*
+X134750000Y-88580000D03*
+D10*
+X133480000Y-90650000D03*
 D13*
-X116920000Y-46000000D03*
+X106840000Y-48750000D03*
 D14*
-X136000000Y-83530000D03*
+X117000000Y-48750000D03*
+D13*
+X106840000Y-52000000D03*
+D14*
+X117000000Y-52000000D03*
+D13*
+X145060000Y-43250000D03*
+D14*
+X134900000Y-43250000D03*
+X117000000Y-69750000D03*
+D13*
+X106840000Y-69750000D03*
+X106840000Y-73000000D03*
+D14*
+X117000000Y-73000000D03*
+X134920000Y-64250000D03*
+D13*
+X145080000Y-64250000D03*
+X106840000Y-90750000D03*
+D14*
+X117000000Y-90750000D03*
+D13*
+X106840000Y-94000000D03*
+D14*
+X117000000Y-94000000D03*
+D13*
+X149000000Y-88750000D03*
+D14*
+X138840000Y-88750000D03*
+D13*
+X106840000Y-45500000D03*
+D14*
+X117000000Y-45500000D03*
 D15*
+X136000000Y-83530000D03*
+D16*
 X136000000Y-80990000D03*
 X136000000Y-78450000D03*
-D14*
-X129800000Y-41490000D03*
 D15*
+X129800000Y-41490000D03*
+D16*
 X129800000Y-38950000D03*
 X129800000Y-36410000D03*
-D12*
+D13*
 X175320000Y-82200000D03*
-D13*
+D14*
 X185480000Y-82200000D03*
-D16*
-X157500000Y-68000000D03*
-D12*
-X116960000Y-49500000D03*
-D13*
-X106800000Y-49500000D03*
 D17*
-X122301000Y-81000000D03*
+X157500000Y-68000000D03*
 D18*
+X122301000Y-81000000D03*
+D19*
 X122301000Y-83540000D03*
-D19*
+D20*
 X114000000Y-59950000D03*
-D20*
-X106800000Y-59950000D03*
-D12*
-X138800000Y-33840000D03*
-D13*
-X138800000Y-44000000D03*
-D12*
-X106840000Y-67000000D03*
-D13*
-X117000000Y-67000000D03*
-D12*
-X146160000Y-68000000D03*
-D13*
-X136000000Y-68000000D03*
-D12*
-X117000000Y-70500000D03*
-D13*
-X106840000Y-70500000D03*
-D12*
-X195250000Y-61000000D03*
-D13*
-X185090000Y-61000000D03*
-D16*
-X181250000Y-59500000D03*
-D12*
-X134800000Y-33840000D03*
-D13*
-X134800000Y-44000000D03*
-D12*
-X145000000Y-76000000D03*
-D13*
-X145000000Y-86160000D03*
-D19*
-X114000000Y-81000000D03*
-D20*
-X106800000Y-81000000D03*
 D21*
-X150100000Y-38890000D03*
+X106800000Y-59950000D03*
+D13*
+X106840000Y-66500000D03*
+D14*
+X117000000Y-66500000D03*
+D13*
+X195250000Y-61000000D03*
+D14*
+X185090000Y-61000000D03*
+D17*
+X181250000Y-59500000D03*
+D20*
+X114000000Y-81000000D03*
+D21*
+X106800000Y-81000000D03*
 D22*
+X150100000Y-38890000D03*
+D23*
 X150100000Y-41430000D03*
 X150100000Y-43970000D03*
 X150100000Y-46510000D03*
@@ -136,131 +174,98 @@ X172960000Y-46510000D03*
 X172960000Y-43970000D03*
 X172960000Y-41430000D03*
 X172960000Y-38890000D03*
-D23*
-X193525000Y-67000000D03*
 D24*
+X193525000Y-67000000D03*
+D25*
 X190985000Y-67000000D03*
 X188445000Y-67000000D03*
-D23*
-X192010000Y-41430000D03*
 D24*
+X192010000Y-41430000D03*
+D25*
 X189470000Y-41430000D03*
 X186930000Y-41430000D03*
 X184390000Y-41430000D03*
-D17*
-X172400000Y-72200000D03*
-D25*
-X172400000Y-82360000D03*
-D10*
-X122000000Y-91040000D03*
-D11*
-X119460000Y-88500000D03*
-X122000000Y-85960000D03*
-D17*
-X122300000Y-38960000D03*
 D18*
+X172400000Y-72200000D03*
+D26*
+X172400000Y-82360000D03*
+D18*
+X122300000Y-38960000D03*
+D19*
 X122300000Y-41500000D03*
-D23*
-X169170000Y-92750000D03*
 D24*
+X169170000Y-92750000D03*
+D25*
 X171710000Y-92750000D03*
 X174250000Y-92750000D03*
-D10*
-X122000000Y-70000000D03*
-D11*
-X119460000Y-67460000D03*
-X122000000Y-64920000D03*
-D23*
-X192010000Y-36780000D03*
 D24*
+X192010000Y-36780000D03*
+D25*
 X189470000Y-36780000D03*
 X186930000Y-36780000D03*
 X184390000Y-36780000D03*
-D12*
-X149000000Y-76000000D03*
-D13*
-X149000000Y-86160000D03*
-D12*
-X139000000Y-54840000D03*
-D13*
-X139000000Y-65000000D03*
-D14*
-X129750000Y-62500000D03*
 D15*
+X129750000Y-62500000D03*
+D16*
 X129750000Y-59960000D03*
 X129750000Y-57420000D03*
-D16*
+D17*
-X134500000Y-100750000D03*
+X139750000Y-104250000D03*
-D12*
-X185240000Y-78200000D03*
 D13*
-X195400000Y-78200000D03*
+X185240000Y-78200000D03*
 D14*
-X129750000Y-83530000D03*
+X195400000Y-78200000D03*
 D15*
+X129750000Y-83530000D03*
+D16*
 X129750000Y-80990000D03*
 X129750000Y-78450000D03*
-D12*
+D13*
 X179400000Y-75700000D03*
 X179400000Y-78200000D03*
-X141000000Y-76000000D03*
-D13*
-X141000000Y-86160000D03*
-D23*
-X192010000Y-46080000D03*
 D24*
+X192010000Y-46080000D03*
+D25*
 X189470000Y-46080000D03*
 X186930000Y-46080000D03*
 X184390000Y-46080000D03*
-D19*
+D20*
 X114000000Y-101000000D03*
-D20*
+D21*
 X106800000Y-101000000D03*
-D12*
-X106820000Y-88000000D03*
 D13*
-X116980000Y-88000000D03*
+X106840000Y-87500000D03*
-D17*
+D14*
+X117000000Y-87500000D03*
+D18*
 X168400000Y-72200000D03*
-D25*
-X168400000Y-82360000D03*
 D26*
+X168400000Y-82360000D03*
+D27*
 X176200000Y-51600000D03*
-D19*
-X114000000Y-38950000D03*
 D20*
+X114000000Y-38950000D03*
+D21*
 X106800000Y-38950000D03*
-D10*
+D28*
 X189470000Y-54130000D03*
-D11*
+D29*
 X186930000Y-54130000D03*
 X184390000Y-54130000D03*
 X181850000Y-54130000D03*
-D12*
+D30*
-X134900000Y-54840000D03*
+X128500000Y-102250000D03*
-D13*
+X131040000Y-102250000D03*
-X134900000Y-65000000D03*
+D31*
-D14*
+X133580000Y-102250000D03*
-X127750000Y-98170000D03*
-D15*
-X127750000Y-100710000D03*
-X127750000Y-103250000D03*
-D12*
-X146160000Y-47000000D03*
-D13*
-X136000000Y-47000000D03*
-D12*
-X116980000Y-91500000D03*
-D13*
-X106820000Y-91500000D03*
-D17*
-X122300000Y-59960000D03*
 D18*
+X122300000Y-59960000D03*
+D19*
 X122300000Y-62500000D03*
-D12*
-X195400000Y-74200000D03*
 D13*
+X195400000Y-74200000D03*
+D14*
 X185240000Y-74200000D03*
-D16*
+D17*
 X153750000Y-68000000D03*
 M02*

KiCad/CanGrow/gerber/CanGrow-B_Paste.gbp

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*
-G04 #@! TF.CreationDate,2024-04-08T19:06:54+02:00*
+G04 #@! TF.CreationDate,2024-04-09T13:44:03+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:54*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:03*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-B_Silkscreen.gbo

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*
-G04 #@! TF.CreationDate,2024-04-08T19:06:54+02:00*
+G04 #@! TF.CreationDate,2024-04-09T13:44:03+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:54*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:03*
 %MOMM*%
 %LPD*%
 G01*
@@ -31,23 +31,28 @@ G04 Aperture macros list*
 G04 Aperture macros list end*
 %ADD10C,0.100000*%
 %ADD11C,0.300000*%
-%ADD12R,1.500000X1.500000*%
+%ADD12R,1.100000X1.800000*%
-%ADD13C,1.500000*%
+%ADD13RoundRect,0.275000X0.275000X0.625000X-0.275000X0.625000X-0.275000X-0.625000X0.275000X-0.625000X0*%
-%ADD14C,1.600000*%
+%ADD14RoundRect,0.275000X-0.275000X-0.625000X0.275000X-0.625000X0.275000X0.625000X-0.275000X0.625000X0*%
-%ADD15O,1.600000X1.600000*%
+%ADD15C,1.600000*%
-%ADD16R,2.000000X1.905000*%
+%ADD16O,1.600000X1.600000*%
-%ADD17O,2.000000X1.905000*%
+%ADD17R,2.000000X1.905000*%
-%ADD18RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
+%ADD18O,2.000000X1.905000*%
-%ADD19R,1.800000X1.800000*%
+%ADD19RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
-%ADD20C,1.800000*%
+%ADD20R,1.800000X1.800000*%
-%ADD21RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
+%ADD21C,1.800000*%
-%ADD22C,6.000000*%
+%ADD22RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
-%ADD23R,2.000000X2.000000*%
+%ADD23C,6.000000*%
-%ADD24O,2.000000X1.600000*%
+%ADD24R,2.000000X2.000000*%
-%ADD25R,1.700000X1.700000*%
+%ADD25O,2.000000X1.600000*%
-%ADD26O,1.700000X1.700000*%
+%ADD26R,1.700000X1.700000*%
-%ADD27O,1.800000X1.800000*%
+%ADD27O,1.700000X1.700000*%
-%ADD28C,2.000000*%
+%ADD28O,1.800000X1.800000*%
+%ADD29C,2.000000*%
+%ADD30R,1.500000X1.500000*%
+%ADD31C,1.500000*%
+%ADD32O,1.905000X2.000000*%
+%ADD33R,1.905000X2.000000*%
 G04 APERTURE END LIST*
 D10*
 X161600000Y-68950000D02*
@@ -131,79 +136,112 @@ X157250000Y-70000000D01*
 X156750000Y-72000000D01*
 %LPC*%
 D12*
-X122000000Y-49000000D03*
+X129750000Y-46850000D03*
 D13*
-X119460000Y-46460000D03*
+X128480000Y-48920000D03*
-X122000000Y-43920000D03*
+X127210000Y-46850000D03*
+D12*
+X133480000Y-48670000D03*
 D14*
-X106760000Y-46000000D03*
+X134750000Y-46600000D03*
+X136020000Y-48670000D03*
+D12*
+X129790000Y-67850000D03*
+D13*
+X128520000Y-69920000D03*
+X127250000Y-67850000D03*
+D12*
+X133500000Y-69670000D03*
+D14*
+X134770000Y-67600000D03*
+X136040000Y-69670000D03*
+D12*
+X129770000Y-88850000D03*
+D13*
+X128500000Y-90920000D03*
+X127230000Y-88850000D03*
+D14*
+X136020000Y-90650000D03*
+X134750000Y-88580000D03*
+D12*
+X133480000Y-90650000D03*
 D15*
-X116920000Y-46000000D03*
+X106840000Y-48750000D03*
 D16*
-X136000000Y-83530000D03*
+X117000000Y-48750000D03*
+D15*
+X106840000Y-52000000D03*
+D16*
+X117000000Y-52000000D03*
+D15*
+X145060000Y-43250000D03*
+D16*
+X134900000Y-43250000D03*
+X117000000Y-69750000D03*
+D15*
+X106840000Y-69750000D03*
+X106840000Y-73000000D03*
+D16*
+X117000000Y-73000000D03*
+X134920000Y-64250000D03*
+D15*
+X145080000Y-64250000D03*
+X106840000Y-90750000D03*
+D16*
+X117000000Y-90750000D03*
+D15*
+X106840000Y-94000000D03*
+D16*
+X117000000Y-94000000D03*
+D15*
+X149000000Y-88750000D03*
+D16*
+X138840000Y-88750000D03*
+D15*
+X106840000Y-45500000D03*
+D16*
+X117000000Y-45500000D03*
 D17*
+X136000000Y-83530000D03*
+D18*
 X136000000Y-80990000D03*
 X136000000Y-78450000D03*
-D16*
-X129800000Y-41490000D03*
 D17*
+X129800000Y-41490000D03*
+D18*
 X129800000Y-38950000D03*
 X129800000Y-36410000D03*
-D14*
+D15*
 X175320000Y-82200000D03*
-D15*
+D16*
 X185480000Y-82200000D03*
-D18*
-X157500000Y-68000000D03*
-D14*
-X116960000Y-49500000D03*
-D15*
-X106800000Y-49500000D03*
 D19*
-X122301000Y-81000000D03*
+X157500000Y-68000000D03*
 D20*
+X122301000Y-81000000D03*
+D21*
 X122301000Y-83540000D03*
-D21*
+D22*
 X114000000Y-59950000D03*
-D22*
-X106800000Y-59950000D03*
-D14*
-X138800000Y-33840000D03*
-D15*
-X138800000Y-44000000D03*
-D14*
-X106840000Y-67000000D03*
-D15*
-X117000000Y-67000000D03*
-D14*
-X146160000Y-68000000D03*
-D15*
-X136000000Y-68000000D03*
-D14*
-X117000000Y-70500000D03*
-D15*
-X106840000Y-70500000D03*
-D14*
-X195250000Y-61000000D03*
-D15*
-X185090000Y-61000000D03*
-D18*
-X181250000Y-59500000D03*
-D14*
-X134800000Y-33840000D03*
-D15*
-X134800000Y-44000000D03*
-D14*
-X145000000Y-76000000D03*
-D15*
-X145000000Y-86160000D03*
-D21*
-X114000000Y-81000000D03*
-D22*
-X106800000Y-81000000D03*
 D23*
-X150100000Y-38890000D03*
+X106800000Y-59950000D03*
+D15*
+X106840000Y-66500000D03*
+D16*
+X117000000Y-66500000D03*
+D15*
+X195250000Y-61000000D03*
+D16*
+X185090000Y-61000000D03*
+D19*
+X181250000Y-59500000D03*
+D22*
+X114000000Y-81000000D03*
+D23*
+X106800000Y-81000000D03*
 D24*
+X150100000Y-38890000D03*
+D25*
 X150100000Y-41430000D03*
 X150100000Y-43970000D03*
 X150100000Y-46510000D03*
@@ -219,132 +257,99 @@ X172960000Y-46510000D03*
 X172960000Y-43970000D03*
 X172960000Y-41430000D03*
 X172960000Y-38890000D03*
-D25*
-X193525000Y-67000000D03*
 D26*
+X193525000Y-67000000D03*
+D27*
 X190985000Y-67000000D03*
 X188445000Y-67000000D03*
-D25*
-X192010000Y-41430000D03*
 D26*
+X192010000Y-41430000D03*
+D27*
 X189470000Y-41430000D03*
 X186930000Y-41430000D03*
 X184390000Y-41430000D03*
-D19*
-X172400000Y-72200000D03*
-D27*
-X172400000Y-82360000D03*
-D12*
-X122000000Y-91040000D03*
-D13*
-X119460000Y-88500000D03*
-X122000000Y-85960000D03*
-D19*
-X122300000Y-38960000D03*
 D20*
+X172400000Y-72200000D03*
+D28*
+X172400000Y-82360000D03*
+D20*
+X122300000Y-38960000D03*
+D21*
 X122300000Y-41500000D03*
-D25*
-X169170000Y-92750000D03*
 D26*
+X169170000Y-92750000D03*
+D27*
 X171710000Y-92750000D03*
 X174250000Y-92750000D03*
-D12*
-X122000000Y-70000000D03*
-D13*
-X119460000Y-67460000D03*
-X122000000Y-64920000D03*
-D25*
-X192010000Y-36780000D03*
 D26*
+X192010000Y-36780000D03*
+D27*
 X189470000Y-36780000D03*
 X186930000Y-36780000D03*
 X184390000Y-36780000D03*
-D14*
-X149000000Y-76000000D03*
-D15*
-X149000000Y-86160000D03*
-D14*
-X139000000Y-54840000D03*
-D15*
-X139000000Y-65000000D03*
-D16*
-X129750000Y-62500000D03*
 D17*
+X129750000Y-62500000D03*
+D18*
 X129750000Y-59960000D03*
 X129750000Y-57420000D03*
-D18*
+D19*
-X134500000Y-100750000D03*
+X139750000Y-104250000D03*
-D14*
-X185240000Y-78200000D03*
 D15*
-X195400000Y-78200000D03*
+X185240000Y-78200000D03*
 D16*
-X129750000Y-83530000D03*
+X195400000Y-78200000D03*
 D17*
+X129750000Y-83530000D03*
+D18*
 X129750000Y-80990000D03*
 X129750000Y-78450000D03*
-D14*
+D15*
 X179400000Y-75700000D03*
 X179400000Y-78200000D03*
-X141000000Y-76000000D03*
-D15*
-X141000000Y-86160000D03*
-D25*
-X192010000Y-46080000D03*
 D26*
+X192010000Y-46080000D03*
+D27*
 X189470000Y-46080000D03*
 X186930000Y-46080000D03*
 X184390000Y-46080000D03*
-D21*
+D22*
 X114000000Y-101000000D03*
-D22*
+D23*
 X106800000Y-101000000D03*
-D14*
-X106820000Y-88000000D03*
 D15*
-X116980000Y-88000000D03*
+X106840000Y-87500000D03*
-D19*
+D16*
+X117000000Y-87500000D03*
+D20*
 X168400000Y-72200000D03*
-D27*
-X168400000Y-82360000D03*
 D28*
+X168400000Y-82360000D03*
+D29*
 X176200000Y-51600000D03*
-D21*
-X114000000Y-38950000D03*
 D22*
+X114000000Y-38950000D03*
+D23*
 X106800000Y-38950000D03*
-D12*
+D30*
 X189470000Y-54130000D03*
-D13*
+D31*
 X186930000Y-54130000D03*
 X184390000Y-54130000D03*
 X181850000Y-54130000D03*
-D14*
+D32*
-X134900000Y-54840000D03*
+X128500000Y-102250000D03*
-D15*
+X131040000Y-102250000D03*
-X134900000Y-65000000D03*
+D33*
-D16*
+X133580000Y-102250000D03*
-X127750000Y-98170000D03*
-D17*
-X127750000Y-100710000D03*
-X127750000Y-103250000D03*
-D14*
-X146160000Y-47000000D03*
-D15*
-X136000000Y-47000000D03*
-D14*
-X116980000Y-91500000D03*
-D15*
-X106820000Y-91500000D03*
-D19*
-X122300000Y-59960000D03*
 D20*
+X122300000Y-59960000D03*
+D21*
 X122300000Y-62500000D03*
-D14*
-X195400000Y-74200000D03*
 D15*
+X195400000Y-74200000D03*
+D16*
 X185240000Y-74200000D03*
-D18*
+D19*
 X153750000Y-68000000D03*
 %LPD*%
 M02*

KiCad/CanGrow/gerber/CanGrow-Edge_Cuts.gm1

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*
-G04 #@! TF.CreationDate,2024-04-08T19:06:54+02:00*
+G04 #@! TF.CreationDate,2024-04-09T13:44:03+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:54*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:03*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-F_Mask.gts

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*
-G04 #@! TF.CreationDate,2024-04-08T19:06:54+02:00*
+G04 #@! TF.CreationDate,2024-04-09T13:44:03+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:54*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:03*
 %MOMM*%
 %LPD*%
 G01*
@@ -29,98 +29,136 @@ G04 Aperture macros list*
 20,1,$1+$1,$6,$7,$8,$9,0*
 20,1,$1+$1,$8,$9,$2,$3,0*%
 G04 Aperture macros list end*
-%ADD10R,1.500000X1.500000*%
+%ADD10R,1.100000X1.800000*%
-%ADD11C,1.500000*%
+%ADD11RoundRect,0.275000X0.275000X0.625000X-0.275000X0.625000X-0.275000X-0.625000X0.275000X-0.625000X0*%
-%ADD12C,1.600000*%
+%ADD12RoundRect,0.275000X-0.275000X-0.625000X0.275000X-0.625000X0.275000X0.625000X-0.275000X0.625000X0*%
-%ADD13O,1.600000X1.600000*%
+%ADD13C,1.600000*%
-%ADD14R,2.000000X1.905000*%
+%ADD14O,1.600000X1.600000*%
-%ADD15O,2.000000X1.905000*%
+%ADD15R,2.000000X1.905000*%
-%ADD16RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
+%ADD16O,2.000000X1.905000*%
-%ADD17R,1.800000X1.800000*%
+%ADD17RoundRect,0.250001X-0.799999X-0.799999X0.799999X-0.799999X0.799999X0.799999X-0.799999X0.799999X0*%
-%ADD18C,1.800000*%
+%ADD18R,1.800000X1.800000*%
-%ADD19RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
+%ADD19C,1.800000*%
-%ADD20C,6.000000*%
+%ADD20RoundRect,1.500000X1.500000X1.500000X-1.500000X1.500000X-1.500000X-1.500000X1.500000X-1.500000X0*%
-%ADD21R,2.000000X2.000000*%
+%ADD21C,6.000000*%
-%ADD22O,2.000000X1.600000*%
+%ADD22R,2.000000X2.000000*%
-%ADD23R,1.700000X1.700000*%
+%ADD23O,2.000000X1.600000*%
-%ADD24O,1.700000X1.700000*%
+%ADD24R,1.700000X1.700000*%
-%ADD25O,1.800000X1.800000*%
+%ADD25O,1.700000X1.700000*%
-%ADD26C,2.000000*%
+%ADD26O,1.800000X1.800000*%
+%ADD27C,2.000000*%
+%ADD28R,1.500000X1.500000*%
+%ADD29C,1.500000*%
+%ADD30O,1.905000X2.000000*%
+%ADD31R,1.905000X2.000000*%
 G04 APERTURE END LIST*
 D10*
-X122000000Y-49000000D03*
+X129750000Y-46850000D03*
 D11*
-X119460000Y-46460000D03*
+X128480000Y-48920000D03*
-X122000000Y-43920000D03*
+X127210000Y-46850000D03*
+D10*
+X133480000Y-48670000D03*
 D12*
-X106760000Y-46000000D03*
+X134750000Y-46600000D03*
+X136020000Y-48670000D03*
+D10*
+X129790000Y-67850000D03*
+D11*
+X128520000Y-69920000D03*
+X127250000Y-67850000D03*
+D10*
+X133500000Y-69670000D03*
+D12*
+X134770000Y-67600000D03*
+X136040000Y-69670000D03*
+D10*
+X129770000Y-88850000D03*
+D11*
+X128500000Y-90920000D03*
+X127230000Y-88850000D03*
+D12*
+X136020000Y-90650000D03*
+X134750000Y-88580000D03*
+D10*
+X133480000Y-90650000D03*
 D13*
-X116920000Y-46000000D03*
+X106840000Y-48750000D03*
 D14*
-X136000000Y-83530000D03*
+X117000000Y-48750000D03*
+D13*
+X106840000Y-52000000D03*
+D14*
+X117000000Y-52000000D03*
+D13*
+X145060000Y-43250000D03*
+D14*
+X134900000Y-43250000D03*
+X117000000Y-69750000D03*
+D13*
+X106840000Y-69750000D03*
+X106840000Y-73000000D03*
+D14*
+X117000000Y-73000000D03*
+X134920000Y-64250000D03*
+D13*
+X145080000Y-64250000D03*
+X106840000Y-90750000D03*
+D14*
+X117000000Y-90750000D03*
+D13*
+X106840000Y-94000000D03*
+D14*
+X117000000Y-94000000D03*
+D13*
+X149000000Y-88750000D03*
+D14*
+X138840000Y-88750000D03*
+D13*
+X106840000Y-45500000D03*
+D14*
+X117000000Y-45500000D03*
 D15*
+X136000000Y-83530000D03*
+D16*
 X136000000Y-80990000D03*
 X136000000Y-78450000D03*
-D14*
-X129800000Y-41490000D03*
 D15*
+X129800000Y-41490000D03*
+D16*
 X129800000Y-38950000D03*
 X129800000Y-36410000D03*
-D12*
+D13*
 X175320000Y-82200000D03*
-D13*
+D14*
 X185480000Y-82200000D03*
-D16*
-X157500000Y-68000000D03*
-D12*
-X116960000Y-49500000D03*
-D13*
-X106800000Y-49500000D03*
 D17*
-X122301000Y-81000000D03*
+X157500000Y-68000000D03*
 D18*
+X122301000Y-81000000D03*
+D19*
 X122301000Y-83540000D03*
-D19*
+D20*
 X114000000Y-59950000D03*
-D20*
-X106800000Y-59950000D03*
-D12*
-X138800000Y-33840000D03*
-D13*
-X138800000Y-44000000D03*
-D12*
-X106840000Y-67000000D03*
-D13*
-X117000000Y-67000000D03*
-D12*
-X146160000Y-68000000D03*
-D13*
-X136000000Y-68000000D03*
-D12*
-X117000000Y-70500000D03*
-D13*
-X106840000Y-70500000D03*
-D12*
-X195250000Y-61000000D03*
-D13*
-X185090000Y-61000000D03*
-D16*
-X181250000Y-59500000D03*
-D12*
-X134800000Y-33840000D03*
-D13*
-X134800000Y-44000000D03*
-D12*
-X145000000Y-76000000D03*
-D13*
-X145000000Y-86160000D03*
-D19*
-X114000000Y-81000000D03*
-D20*
-X106800000Y-81000000D03*
 D21*
-X150100000Y-38890000D03*
+X106800000Y-59950000D03*
+D13*
+X106840000Y-66500000D03*
+D14*
+X117000000Y-66500000D03*
+D13*
+X195250000Y-61000000D03*
+D14*
+X185090000Y-61000000D03*
+D17*
+X181250000Y-59500000D03*
+D20*
+X114000000Y-81000000D03*
+D21*
+X106800000Y-81000000D03*
 D22*
+X150100000Y-38890000D03*
+D23*
 X150100000Y-41430000D03*
 X150100000Y-43970000D03*
 X150100000Y-46510000D03*
@@ -136,131 +174,98 @@ X172960000Y-46510000D03*
 X172960000Y-43970000D03*
 X172960000Y-41430000D03*
 X172960000Y-38890000D03*
-D23*
-X193525000Y-67000000D03*
 D24*
+X193525000Y-67000000D03*
+D25*
 X190985000Y-67000000D03*
 X188445000Y-67000000D03*
-D23*
-X192010000Y-41430000D03*
 D24*
+X192010000Y-41430000D03*
+D25*
 X189470000Y-41430000D03*
 X186930000Y-41430000D03*
 X184390000Y-41430000D03*
-D17*
-X172400000Y-72200000D03*
-D25*
-X172400000Y-82360000D03*
-D10*
-X122000000Y-91040000D03*
-D11*
-X119460000Y-88500000D03*
-X122000000Y-85960000D03*
-D17*
-X122300000Y-38960000D03*
 D18*
+X172400000Y-72200000D03*
+D26*
+X172400000Y-82360000D03*
+D18*
+X122300000Y-38960000D03*
+D19*
 X122300000Y-41500000D03*
-D23*
-X169170000Y-92750000D03*
 D24*
+X169170000Y-92750000D03*
+D25*
 X171710000Y-92750000D03*
 X174250000Y-92750000D03*
-D10*
-X122000000Y-70000000D03*
-D11*
-X119460000Y-67460000D03*
-X122000000Y-64920000D03*
-D23*
-X192010000Y-36780000D03*
 D24*
+X192010000Y-36780000D03*
+D25*
 X189470000Y-36780000D03*
 X186930000Y-36780000D03*
 X184390000Y-36780000D03*
-D12*
-X149000000Y-76000000D03*
-D13*
-X149000000Y-86160000D03*
-D12*
-X139000000Y-54840000D03*
-D13*
-X139000000Y-65000000D03*
-D14*
-X129750000Y-62500000D03*
 D15*
+X129750000Y-62500000D03*
+D16*
 X129750000Y-59960000D03*
 X129750000Y-57420000D03*
-D16*
+D17*
-X134500000Y-100750000D03*
+X139750000Y-104250000D03*
-D12*
-X185240000Y-78200000D03*
 D13*
-X195400000Y-78200000D03*
+X185240000Y-78200000D03*
 D14*
-X129750000Y-83530000D03*
+X195400000Y-78200000D03*
 D15*
+X129750000Y-83530000D03*
+D16*
 X129750000Y-80990000D03*
 X129750000Y-78450000D03*
-D12*
+D13*
 X179400000Y-75700000D03*
 X179400000Y-78200000D03*
-X141000000Y-76000000D03*
-D13*
-X141000000Y-86160000D03*
-D23*
-X192010000Y-46080000D03*
 D24*
+X192010000Y-46080000D03*
+D25*
 X189470000Y-46080000D03*
 X186930000Y-46080000D03*
 X184390000Y-46080000D03*
-D19*
+D20*
 X114000000Y-101000000D03*
-D20*
+D21*
 X106800000Y-101000000D03*
-D12*
-X106820000Y-88000000D03*
 D13*
-X116980000Y-88000000D03*
+X106840000Y-87500000D03*
-D17*
+D14*
+X117000000Y-87500000D03*
+D18*
 X168400000Y-72200000D03*
-D25*
-X168400000Y-82360000D03*
 D26*
+X168400000Y-82360000D03*
+D27*
 X176200000Y-51600000D03*
-D19*
-X114000000Y-38950000D03*
 D20*
+X114000000Y-38950000D03*
+D21*
 X106800000Y-38950000D03*
-D10*
+D28*
 X189470000Y-54130000D03*
-D11*
+D29*
 X186930000Y-54130000D03*
 X184390000Y-54130000D03*
 X181850000Y-54130000D03*
-D12*
+D30*
-X134900000Y-54840000D03*
+X128500000Y-102250000D03*
-D13*
+X131040000Y-102250000D03*
-X134900000Y-65000000D03*
+D31*
-D14*
+X133580000Y-102250000D03*
-X127750000Y-98170000D03*
-D15*
-X127750000Y-100710000D03*
-X127750000Y-103250000D03*
-D12*
-X146160000Y-47000000D03*
-D13*
-X136000000Y-47000000D03*
-D12*
-X116980000Y-91500000D03*
-D13*
-X106820000Y-91500000D03*
-D17*
-X122300000Y-59960000D03*
 D18*
+X122300000Y-59960000D03*
+D19*
 X122300000Y-62500000D03*
-D12*
-X195400000Y-74200000D03*
 D13*
+X195400000Y-74200000D03*
+D14*
 X185240000Y-74200000D03*
-D16*
+D17*
 X153750000Y-68000000D03*
 M02*

KiCad/CanGrow/gerber/CanGrow-F_Paste.gtp

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*
-G04 #@! TF.CreationDate,2024-04-08T19:06:54+02:00*
+G04 #@! TF.CreationDate,2024-04-09T13:44:03+02:00*
 G04 #@! TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:54*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:03*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-NPTH-drl_map.gbr

@@ -1,12 +1,12 @@
 %TF.GenerationSoftware,KiCad,Pcbnew,8.0.1*%
-%TF.CreationDate,2024-04-08T19:06:57+02:00*%
+%TF.CreationDate,2024-04-09T13:44:06+02:00*%
 %TF.ProjectId,CanGrow,43616e47-726f-4772-9e6b-696361645f70,rev?*%
 %TF.SameCoordinates,Original*%
 %TF.FileFunction,Drillmap*%
 %TF.FilePolarity,Positive*%
 %FSLAX45Y45*%
 G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-08 19:06:57*
+G04 Created by KiCad (PCBNEW 8.0.1) date 2024-04-09 13:44:06*
 %MOMM*%
 %LPD*%
 G01*

KiCad/CanGrow/gerber/CanGrow-NPTH.drl

@@ -1,7 +1,7 @@
 M48
-; DRILL file {KiCad 8.0.1} date 2024-04-08T19:06:56+0200
+; DRILL file {KiCad 8.0.1} date 2024-04-09T13:44:05+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2024-04-08T19:06:56+02:00
+; #@! TF.CreationDate,2024-04-09T13:44:05+02:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.1
 ; #@! TF.FileFunction,NonPlated,1,2,NPTH
 FMAT,2

KiCad/CanGrow/gerber/CanGrow-PTH.drl

@@ -1,64 +1,70 @@
 M48
-; DRILL file {KiCad 8.0.1} date 2024-04-08T19:06:56+0200
+; DRILL file {KiCad 8.0.1} date 2024-04-09T13:44:05+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2024-04-08T19:06:56+02:00
+; #@! TF.CreationDate,2024-04-09T13:44:05+02:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.1
 ; #@! TF.FileFunction,Plated,1,2,PTH
 FMAT,2
 METRIC
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T1C0.800
+T1C0.750
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T2C0.900
+T2C0.800
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T3C1.000
+T3C0.900
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T4C1.100
+T4C1.000
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
-T5C4.500
+T5C1.100
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T6C4.500
 %
 G90
 G05
 T1
-X106.76Y-46.0
+X127.21Y-47.25
-X106.8Y-49.5
+X127.23Y-89.25
-X106.82Y-88.0
+X127.25Y-68.25
-X106.82Y-91.5
+X128.48Y-48.52
-X106.84Y-67.0
+X128.5Y-90.52
-X106.84Y-70.5
+X128.52Y-69.52
-X116.92Y-46.0
+X129.75Y-47.25
-X116.96Y-49.5
+X129.77Y-89.25
-X116.98Y-88.0
+X129.79Y-68.25
-X116.98Y-91.5
+X133.48Y-48.27
-X117.0Y-67.0
+X133.48Y-90.25
-X117.0Y-70.5
+X133.5Y-69.27
-X119.46Y-46.46
+X134.75Y-47.0
-X119.46Y-67.46
+X134.75Y-88.98
-X119.46Y-88.5
+X134.77Y-68.0
-X122.0Y-43.92
+X136.02Y-48.27
-X122.0Y-49.0
+X136.02Y-90.25
-X122.0Y-64.92
+X136.04Y-69.27
-X122.0Y-70.0
+T2
-X122.0Y-85.96
+X106.84Y-45.5
-X122.0Y-91.04
+X106.84Y-48.75
-X134.8Y-33.84
+X106.84Y-52.0
-X134.8Y-44.0
+X106.84Y-66.5
-X134.9Y-54.84
+X106.84Y-69.75
-X134.9Y-65.0
+X106.84Y-73.0
-X136.0Y-47.0
+X106.84Y-87.5
-X136.0Y-68.0
+X106.84Y-90.75
-X138.8Y-33.84
+X106.84Y-94.0
-X138.8Y-44.0
+X117.0Y-45.5
-X139.0Y-54.84
+X117.0Y-48.75
-X139.0Y-65.0
+X117.0Y-52.0
-X141.0Y-76.0
+X117.0Y-66.5
-X141.0Y-86.16
+X117.0Y-69.75
-X145.0Y-76.0
+X117.0Y-73.0
-X145.0Y-86.16
+X117.0Y-87.5
-X146.16Y-47.0
+X117.0Y-90.75
-X146.16Y-68.0
+X117.0Y-94.0
-X149.0Y-76.0
+X134.9Y-43.25
-X149.0Y-86.16
+X134.92Y-64.25
+X138.84Y-88.75
+X145.06Y-43.25
+X145.08Y-64.25
+X149.0Y-88.75
 X175.32Y-82.2
 X179.4Y-75.7
 X179.4Y-78.2
@@ -73,7 +79,7 @@ X189.47Y-54.13
 X195.25Y-61.0
 X195.4Y-74.2
 X195.4Y-78.2
-T2
+T3
 X122.3Y-38.96
 X122.3Y-41.5
 X122.3Y-59.96
@@ -84,7 +90,7 @@ X168.4Y-72.2
 X168.4Y-82.36
 X172.4Y-72.2
 X172.4Y-82.36
-T3
+T4
 X150.1Y-38.89
 X150.1Y-41.43
 X150.1Y-43.97
@@ -120,10 +126,8 @@ X192.01Y-36.78
 X192.01Y-41.43
 X192.01Y-46.08
 X193.525Y-67.0
-T4
+T5
-X127.75Y-98.17
+X128.5Y-102.25
-X127.75Y-100.71
-X127.75Y-103.25
 X129.75Y-57.42
 X129.75Y-59.96
 X129.75Y-62.5
@@ -133,14 +137,16 @@ X129.75Y-83.53
 X129.8Y-36.41
 X129.8Y-38.95
 X129.8Y-41.49
-X134.5Y-100.75
+X131.04Y-102.25
+X133.58Y-102.25
 X136.0Y-78.45
 X136.0Y-80.99
 X136.0Y-83.53
+X139.75Y-104.25
 X153.75Y-68.0
 X157.5Y-68.0
 X181.25Y-59.5
-T5
+T6
 X106.8Y-38.95
 X106.8Y-59.95
 X106.8Y-81.0